6 layers40 × 15 mm
2 layers37.8 × 60.5 mm
Rp2040-devboard
TrAyZeN/rp2040-devboard- Size
- 37.8 × 60.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 56
- Pads
- 208
- Tracks, vias
- 427, 58
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 May 2024
- Updated
- 23 Aug 2024
Overview
Rp2040-devboard is an open-source printed circuit board by TrAyZeN, from the TrAyZeN/rp2040-devboard repository on GitHub. It is a 2-layer board of 37.8 × 60.5 mm with 37 parts on 56 nets, routed with 427 tracks and 58 vias.
It is built around the RP2040, NCP360SN and W25Q128JVSIQ, with the ABM8-272-T3 among its other parts. Its parts include 19 capacitors, 5 resistors, 4 ICs, 4 connectors and 2 diodes. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
NCP360SN
TSOP-5-1.5mm-40℃~+85℃ 1.2V~20V 24uA 24uA TSOP-5-1.5mm USB Converters ROHSonsemiUSB ICs
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C402, C403, C405, C406, C407, C408, C409, C410, C411, C501 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C202, C301, C302, C401, C404, C412 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C413, C414 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R401, R402 |
| 2 | 5.1k 10% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R202 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J601, J602 |
| 2 | ESD321 | Diode_SMD:D_SOD-523 | D201, D202 |
| 2 | SW_Push | rp2040-devboard:SW_SPST_EVPBV | SW401, SW501 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y401 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J603 |
| 1 | DNF | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R501 |
| 1 | NCP360SN | Package_SO:TSOP-5_1.65x3.05mm_P0.95mm | U201 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U401 |
| 1 | TC1017-xLT | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U301 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J201 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U501 |
Similar boards
- 4 layers56 × 56 mm
- 4 layers277.2 × 107.5 mm
Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 4 layers51.8 × 20 mm
Sample target
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!
57 parts29CC0-1.0 - 4 layers61.8 × 79.6 mm
- 4 layers40 × 58.5 mm
- 2 layers174 × 111 mm
Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0 - 2 layers110 × 52 mm
Questions
How big is the Rp2040-devboard PCB?
It measures 37.8 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rp2040-devboard use?
37 parts, built around the RP2040, NCP360SN, W25Q128JVSIQ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rp2040-devboard KiCad files?
From the TrAyZeN/rp2040-devboard repository on GitHub, at the commit this page was made from: the board is pcb/rp2040-devboard.kicad_pcb and its schematic pcb/flash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rp2040-devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask TrAyZeN before reusing the design.