Skip to the content
4 layers92 × 70.5 mmDacAmp, the printed circuit board in 3D
Size
92 × 70.5 mm
Copper layers
4
Thickness
1.61 mm
Parts
111
Nets
73
Pads
324
Tracks, vias
655, 553
Pours
14
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Oct 2024
Updated
17 Nov 2024

Overview

DacAmp is an open-source printed circuit board by 77volatile77, from the 77volatile77/USB-Headphone-Amplifier repository on GitHub. It is a 4-layer board of 92 × 70.5 mm with 111 parts on 73 nets, routed with 655 tracks and 553 vias.

It is built around the NE5532, PCM2906CDB and TLV61046ADBV, with the LM2941LD/NOPB and ESD401DPYR among its other parts. Its parts include 42 capacitors, 37 resistors, 13 ICs, 4 diodes and 2 connectors.

Main components

5

README

README.md

USB Headphone Amplifier

Parts

111
QtyValueFootprintReferences
1020kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR17, R22, R25, R26, R30, R31, R36, R37, R40, R41
9100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC28, C29, C30, C31, C32, C33, C34, C35, C36
9NE5532Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2, U3, U4, U5, U6, U7, U8, U9, U12
81RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R9, R13, R14, R15, R16, R23, R24
610uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC11, C12, C13, C15, C19, C20
61uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC3, C4, C5, C6, C7, C24
5TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2, TP4, TP5, TP6
4750Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR11, R12, R18, R19
4MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_ISO7380_PadH1, H2, H3, H4
3100uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC27, C41, C42
31k5Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R5, R6
2100nCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC21, C39
210uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C8
215nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C23
21k6Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR10, R20
220pCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC9, C10
222RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR3, R4
230pCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC18, C25
25k1Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR21, R28
27n5Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC14, C16
2ESD321ul_ESD321DYAR:SOT5x3_DYA_TEX-MD1, D2
2ESD401DPYRESD401DPYR:DPY0002AD3, D4
110k7Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR34
110nCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC40
110uCapacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolderC26
110uHVLS3012CX_100M_1:IND_VLS3012CX-100M-1L1
112MHzABM8_12_000MHZ_12_B1U_T:XTAL_ABM8-12.000MHZ-12-B1U-TY1
11MResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR7
11M47Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR27
11kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR35
11uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC38
122u293D226X9035D2TE3:CAP_293D_D_VIS-MC37
12n2Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
14u7Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC22
171k5Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR29
1AudioPlug3Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_HorizontalJ1
1BLM18PG221SN1DInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderFB1
1DNPResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR2
1LM2941LD_NOPBLM2941:NGN0008AU13
1PCM2906CPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU1
1R_Potentiometer_Dualpotentiometer:POT_PTN16-A10220K1B2RV2
1TLV61046ADBPackage_TO_SOT_SMD:SOT-23-6U11
1TLV70237_SOT23-5Package_TO_SOT_SMD:SOT-23-5U10
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ2

Similar boards

  • 4 layers54 × 38 mmEsp32 energy monitor, the printed circuit board in 3D

    Esp32 energy monitor

    rdalla/proj_kicad_esp32_energy_consumption

    The project is a energy monitoring module. It is based on ESP32 with current sensor (sct-013 50A/1V).

    54 parts
  • 4 layers50 × 25 mmDac, the printed circuit board in 3D

    Dac

    77volatile77/TI-USB-Audio-Devboard

    A breadboard adapter for the PCM2906C: A USB 1.1 audio codec made by Texas Instruments. Note: the way the header pinout is defined, this board is only intended to be used as a DAC.

    34 partsMIT
  • 2 layers115 × 67.5 mmAudio Interface rewire, the printed circuit board in 3D

    Audio Interface rewire

    Gadu1in/audio-interface-pcm2906

    An audio interface designed for low impedance earbuds and an external 3.5mm microphone input

    62 parts
  • 2 layers75.5 × 24.5 mmUsb interface, the printed circuit board in 3D

    Usb interface

    rkiendl/oe2lsp_USB-Interface

    primitive and simple USB interfave for classic Ham Radio transceivers. - Brings the TRX to the 21st century and makes the operation of digi modes reliable and easy. - No more cables and adapters - KiCad based

    97 partsCC0-1.0
  • 4 layers42.8 × 36.8 mmDriver board, the printed circuit board in 3D

    Driver board

    blazer82/FT81x_Arduino_Driver

    FT81x on ST7701S Arduino Driver

    49 parts59MIT
  • 2 layers75.9 × 50.1 mmSuspension telemetry, the printed circuit board in 3D

    Suspension telemetry

    porast1/suspension-telemetry

    Suspension telemetry system for mountain bike or dirt bike

    77 parts14MIT
  • 4 layers80.1 × 78.6 mmGb fpga, the printed circuit board in 3D

    Gb fpga

    blazer82/gb.fpga

    FPGA-based handheld console that plays games from Gameboy cartridges

    151 parts12

Questions

How big is the DacAmp PCB?

It measures 92 × 70.5 mm and has 4 copper layers, 1.61 mm thick.

What parts does the DacAmp use?

111 parts, built around the NE5532, PCM2906CDB, TLV61046ADBV and LM2941LD/NOPB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DacAmp KiCad files?

From the 77volatile77/USB-Headphone-Amplifier repository on GitHub, at the commit this page was made from: the board is DacAmp/DacAmp.kicad_pcb and its schematic DacAmp/DacAmp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DacAmp design in my own project?

Its repository states no licence, so its author keeps all rights: ask 77volatile77 before reusing the design.