Skip to the content
123456

TLV61046ADBV

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHS

Part id
ti/TLV61046ADBV
Category
DC DC Converters
Package
SOT-23-6
Pins
6
In stock
10,000 at JLCPCB (C464815)
Used on
24 open-source boards

Overview

The TLV61046ADBV is a DC DC Converter made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TLV61046ADB, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 10,000 are in stock at JLCPCB (part C464815). 24 open-source boards in 21 repositories on GitHub use it.

Symbol

1SW2GND3FB4EN5VOUT6VI
Regulator_Switching:TLV61046ADBFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

17
Supply, least
1.8 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 4
Works from
-40 °C · TA, electrical characteristics operating ambient min · p. 5
Works up to
85 °C · TA, electrical characteristics operating ambient max · p. 5
Junction, hottest
150 °C · TJ, absolute maximum · p. 4
Takes working
110 µA · VIN quiescent current, enabled, no load, no switching, typical · p. 5
Takes asleep
100 nA · VIN shutdown current, disabled, TA = 25°C, typical · p. 5
Current limit
980 mA · Peak switch current limit, VIN = 3.6 V, VOUT = 12 V, typical · p. 5
Output
12.1 V · FB connected to VIN, TJ = 0°C to 125°C, typical · p. 5
Feedback reference
795 mV · FB feedback voltage, PWM mode, TJ = -40°C to 125°C, typical · p. 5
Feedback reference
803 mV · FB feedback voltage, PFM mode, TA = 25°C, typical · p. 5
Switches at
1.05 MHz · VIN = 3.6 V, VOUT = 12 V, PWM mode, typical · p. 5
Junction to air (DBV (SOT23))
177.7 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to board (DBV (SOT23))
33.2 K/W · Junction-to-board thermal resistance · p. 4
Junction to case (DBV (SOT23))
120.6 K/W · Junction-to-case (top) thermal resistance · p. 4
Supply, least
1.6 V · VIN, minimum input after start-up · p. 1

What it is and has

12
Output voltage
Up to 28 V · p. 1
Integrated components
Power diode and isolation switch · p. 1
Switch current
980 mA typical · p. 1
Output voltage accuracy
±2.5% · p. 1
Light-load operation
Power save mode · p. 1
Soft start
Internal, 7 ms · p. 1
Protection
Output short circuit protection · p. 1
Protection
Output overvoltage protection · p. 1
Protection
Thermal shutdown · p. 1
Package
SOT23-6 · p. 1
Maximum output voltage
28 V · p. 1
Fixed output configuration
12 V with FB connected to VIN · p. 16

Around it

4
cap 1.0 µF
between VIN and GND; C1 in the 12-V boost converter application. · p. 11
cap 4.7 µF
between VOUT and GND; C2 in the 12-V boost converter application. · p. 11
ind 10 µH
between VIN and SW; L1 in the 12-V boost converter application. · p. 11
res <80 kΩ
between FB and GND; R2 feedback divider resistor; keep below 80 kΩ for best accuracy. · p. 12

Specifications

44
ParameterConditionsAs printedPage
Voltage range at terminals (2)VIN, EN, FB; over operating free-air temperature rangemin -0.3 · max 6 V4
Voltage range at terminals (2)SW, VOUT; over operating free-air temperature rangemin -0.3 · max 32 V4
Operating junction temperature range, TJ TJmin -40 · max 150 °C4
Storage temperature range, Tstg Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(2)min -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins(3)min -500 · max 500 V4
Input voltage range VINOver operating free-air temperature rangemin 1.8 · max 5.5 V4
Output voltage range VOUTOver operating free-air temperature rangemin 3.3 · max 28 V4
Effective inductance range LOver operating free-air temperature rangetyp 10 uH4
Effective input capacitance range CINOver operating free-air temperature rangemin 0.22 · typ 1 uF4
Effective output capacitance range COUTOver operating free-air temperature rangemin 0.22 · typ 1 · max 10 uF4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATLV61046A, DBV (SOT23), 6 PINStyp 177.7 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TLV61046A, DBV (SOT23), 6 PINStyp 120.6 °C/W4
Junction-to-board thermal resistance RθJBTLV61046A, DBV (SOT23), 6 PINStyp 33.2 °C/W4
Junction-to-top characterization parameter ψJTTLV61046A, DBV (SOT23), 6 PINStyp 21.5 °C/W4
Junction-to-board characterization parameter ψJBTLV61046A, DBV (SOT23), 6 PINStyp 32.6 °C/W4
Input voltage range VINTA = –40°C to 85°Cmin 1.8 · max 5.5 V5
Under voltage lockout threshold VIN_UVLOVIN risingtyp 1.75 · max 1.8 V5
Under voltage lockout threshold VIN_UVLOVIN fallingtyp 1.55 · max 1.6 V5
VIN UVLO hysteresis VIN_HYStyp 200 mV5
Quiescent current into VIN pin IQ_VINIC enabled, no load, no switching, VIN = 1.8 V to 5.5 V, VOUT = 12 Vtyp 110 · max 200 uA5
Shutdown current into VIN pin ISDIC disabled, VIN = 1.8 V to 5.5 V, TA = 25°Ctyp 0.1 · max 1 uA5
Output voltage range VOUTmin 3.3 · max 28 V5
12-V output voltage accuracy VOUT_12VFB pin connected to VIN pin, TJ=0°C to 125°Cmin 11.7 · typ 12.1 · max 12.4 V5
Feedback voltage VREFPWM mode, TA=25°Cmin 0.783 · typ 0.795 · max 0.807 V5
Feedback voltage VREFPWM mode, TJ=-40°C to 125°Cmin 0.775 · typ 0.795 · max 0.815 V5
Feedback voltage VREFPFM mode, TA=25°Ctyp 0.803 V5
Output overvoltage protection threshold VOVPmin 28 · typ 29.2 · max 30.4 V5
Over voltage protection hysteresis VOVP_HYStyp 0.9 V5
Leakage current into FB pin IFB_LKGTA = 25°Cmax 200 nA5
Leakage current into SW pin ISW_LKGIC disabled, TA = 25°Cmax 500 nA5
Isolation MOSFET on resistance RDS(on)VOUT = 12 Vtyp 850 mΩ5
Low-side MOSFET on resistance RDS(on)VOUT = 12 Vtyp 450 mΩ5
Switching frequency fSWVIN = 3.6 V, VOUT = 12 V, PWM modemin 850 · typ 1050 · max 1250 kHz5
Minimal switch on time tON_mintyp 150 · max 250 ns5
Peak switch current limit ILIM_SWVIN = 3.6 V, VOUT = 12 Vmin 680 · typ 980 · max 1250 mA5
Peak switch current limit ILIM_SWVIN = 2.4 V, VOUT = 3.3 Vmin 20 mA5
Pre-charge current ILIM_CHGVIN = 3.6 V, VOUT = 0 Vtyp 30 · max 50 mA5
Startup time tSTARTUPVOUT from VIN to 12 V, COUT_effective = 2.2 uF, IOUT = 0 Amin 2 · typ 5 ms5
EN Logic high threshold VEN_Hmax 1.2 V5
EN Logic Low threshold VEN_Lmin 0.4 V5
Thermal shutdown threshold TSDTJ risingtyp 150 °C5
Thermal shutdown hysteresis TSD_HYSTJ falling below TSDtyp 20 °C5

Pins, by the datasheet

6
1 SW
Converter switch pin connected to the drain of the internal power MOSFET. · p. 3
2 GND
Ground. · p. 3
3 FB
Connect to the resistor divider center tap to program output voltage, or to VIN for an internally set 12 V output. · p. 3
4 EN
Logic high enables the device; logic low disables it and enters shutdown mode. · p. 3
5 VOUT
Output of the boost converter. · p. 3
6 VIN
IC power supply input. · p. 3

Ordering codes, by the datasheet

6
TLV61046ADBVR
SOT-23 (DBV), 6 pins · 3000 pieces, LARGE T&R; NIPDAU | SN lead finish · p. 21
TLV61046ADBVR.A
SOT-23 (DBV), 6 pins · 3000 pieces, LARGE T&R; NIPDAU lead finish · p. 21
TLV61046ADBVT
SOT-23 (DBV), 6 pins · 250 pieces, SMALL T&R; NIPDAU lead finish · p. 21
TLV61046ADBVT.A
SOT-23 (DBV), 6 pins · 250 pieces, SMALL T&R; NIPDAU lead finish · p. 21
TLV61046ADBVTG4
SOT-23 (DBV), 6 pins · 250 pieces, SMALL T&R; NIPDAU lead finish · p. 21
TLV61046ADBVTG4.A
SOT-23 (DBV), 6 pins · 250 pieces, SMALL T&R; NIPDAU lead finish · p. 21

Open-source boards using it

24See all 24
  • 4 layers42.8 × 36.8 mmDriver board, the printed circuit board in 3D

    Driver board

    blazer82/FT81x_Arduino_Driver

    FT81x on ST7701S Arduino Driver

    49 parts59MIT
  • 2 layers75.9 × 50.1 mmSuspension telemetry, the printed circuit board in 3D

    Suspension telemetry

    porast1/suspension-telemetry

    Suspension telemetry system for mountain bike or dirt bike

    77 parts14MIT
  • 4 layers80.1 × 78.6 mmGb fpga, the printed circuit board in 3D

    Gb fpga

    blazer82/gb.fpga

    FPGA-based handheld console that plays games from Gameboy cartridges

    151 parts12
  • 4 layers28.6 × 80.6 mmPmodADC, the printed circuit board in 3D

    PmodADC

    schilkp/PmodADC

    A fully discrete 14bit, 41kHz, FPGA-controlled Successive-Approximation Audio ADC and R2R Audio DAC.

    137 parts6MIT
  • 2 layers37 × 70.9 mmOpendiag, the printed circuit board in 3D

    Opendiag

    maximus64/opendiag-hardware

    OpenDIAG - Open Source OBD2 Interface (Hardware)

    148 parts5CERN-OHL-S-2.0
  • 2 layers66 × 65 mmEL-210-MOD, the printed circuit board in 3D

    EL-210-MOD

    suikan4github/EL-210-MOD

    Alternative circuit for SHARP EL-210 calculator

    36 parts3MIT
  • 4 layers100 × 100 mmPayload board, the printed circuit board in 3D

    Payload board

    inspireFly-VT/ContentCube_Payload_Board

    The payload board for inspireFly's ContentCube satellite.

    98 parts2

Questions

Is there a KiCad symbol and footprint for the TLV61046ADBV?

Yes. The symbol is Regulator_Switching:TLV61046ADB and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV61046ADBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TLV61046ADBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV61046ADBV?

JLCPCB lists it as part C464815, with 10,000 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TLV61046ADBV?

24 boards in 21 repositories on GitHub; the most starred are listed on this page, with their KiCad files.