

Opendiag
OpenDIAG - Open Source OBD2 Interface (Hardware)
- Size
- 37 × 70.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 148
- Nets
- 118
- Pads
- 493
- Tracks, vias
- 1,461, 189
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Aug 2026
- Updated
- 7 Nov 2026
Overview
Opendiag is an open-source printed circuit board by maximus64, from the maximus64/opendiag-hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 37 × 70.9 mm with 148 parts on 118 nets, routed with 1,461 tracks and 189 vias.
It is built around the TJA1051T/3/1, ESP32-S3-WROOM-1-N8 and TJA1027T/20, with the LM358, TLV61046ADBV and TPS54160DGQ among its other parts. Its parts include 57 resistors, 31 capacitors, 22 diodes, 14 ICs and 11 transistors. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
Main components
12TJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTJA1027T/20
SOIC-8-40℃~+150℃ 1 1 1.6mA 10uA 175mV 5V~18V Transceiver ±8kV SOIC-8 LIN Transceivers ROHSNXP SemiconductorsLIN TransceiversLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierTLV61046ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54160DGQ
MSOP-10-EP-40℃~+150℃@(TJ) 1 1.5A 116uA 2.5MHz 3.5V~60V 800mV~58V Adjustable Buck Buck Built-in No MSOP-10-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS92612DBV
SOT-23-5-40℃~+150℃ 0V~40V 1 150mA 4.5V~40V 4.6% Built-in PWM Short Circuit Protection、Over-Temperature Protection (OTP) SOT-23-5 LED Drivers ROHSTexas InstrumentsLED DriversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM393
SOP-8-16V~16V 0℃~+70℃ 2 2.5mA 250nA 2V~36V 36V 5mV 5nA Fail-safe function Open-drain SOP-8 Comparators ROHSMSKSEMIComparatorsSN74LVC2G14DBV
SOT-23-6-40℃~+125℃ 1.4V~3.7V 1.65V~5.5V 10uA 2 2 300mV~1.4V 32mA 32mA 4.7ns@5V,50pF 74LVC Series Schmitt trigger SOT-23-6 Inverters ROHSTexas InstrumentsInvertersTBD62783APG
DIP-18-40℃~+85℃ 0.1mA 1uA 1uA 2V 30V 8 DIP-18 Darlington Transistor Arrays ROHSToshibaPower Distribution SwitchesUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdOpenDIAG - Open Source OBD2 Interface (Hardware)
This repository contains the hardware design files for the OpenDiag OBD-II diagnostic adapter. Built around the ESP32-S3, this interface presents an ELM327-compatible AT command interface over USB and Bluetooth LE, while communicating with most physical bus found on a standard OBD-II connector.

Features
- ESP32-S3, 16 MB flash
- Two CAN transceivers
- K-Line transceiver
- J1850 PWM/VPW transceiver
- Six high-side drivers (OBD pins 6, 9, 11, 12, 13, 14) and one low-side driver (OBD pin 15)
- Adjustable boost converter feeding the high-side drivers
- Battery and high-side voltage sense
- WS2812 status LED and a user button
Get OpenDiag on Tindie
OpenDiag is now available as a fully assembled, ready-to-use open-source OBD2 interface.
License
This project is fully open-source. To properly protect both the physical board and the code, the hardware and software are licensed separately:
- Hardware Design (This Repository): Licensed under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S).
- Firmware/Software (Separate Repository): Licensed under the GNU General Public License v3.0 (GPLv3).
Parts
148| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R3, R12, R22, R24, R27, R28, R45, R49, R50, R51, R52, R53, R56, R57, R59 +1 |
| 12 | 1N5819WS | Diode_SMD:D_SOD-323 | D12, D13, D14, D15, D16, D17, D19, D22, D23, D24, D25, D26 |
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C9, C15, C16, C17, C18, C19, C20, C21, C22, C30 |
| 9 | 100K | Resistor_SMD:R_0402_1005Metric | R16, R26, R29, R31, R32, R36, R39, R44, R48 |
| 8 | DNP | Resistor_SMD:R_0402_1005Metric | R14, R18, R19, R20, R21, R25, R30, R58 |
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C26, C27, C28, C29 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C23 |
| 5 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q6, Q7, Q9 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R13, R38, R43, R47 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q4, Q10, Q11 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 4 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D6, D7, D8, D9 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C25 |
| 2 | 105K | Resistor_SMD:R_0402_1005Metric | R5, R10 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R4, R7 |
| 2 | DNP | Capacitor_SMD:C_0402_1005Metric | C24, R17 |
| 2 | MM3Z3V3 | Diode_SMD:D_SOD-323 | D1, D11 |
| 2 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6 |
| 1 | 0.653 | Resistor_SMD:R_0805_2012Metric | R37 |
| 1 | 10uH | Inductor_SMD:L_Cenker_CKCS252012 | L2 |
| 1 | 15.4K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R46 |
| 1 | 2.4K | Resistor_SMD:R_0402_1005Metric | R42 |
| 1 | 2.7nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 22K | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 280K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R54 |
| 1 | 3.74K | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 33uH | Inductor_SMD:L_Changjiang_FNR4030S | L1 |
| 1 | 442K | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 54.9K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 6.8nF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 6.8pF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 69.8K | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 8.06K | Resistor_SMD:R_0402_1005Metric | R55 |
| 1 | 8.66K | Resistor_SMD:R_0402_1005Metric | R40 |
| 1 | 80.6K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 82.5K | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AUX_CAN | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J3 |
| 1 | BSMD0805-030-30V | Fuse:Fuse_0805_2012Metric | F2 |
| 1 | BZX84Cxx | Package_TO_SOT_SMD:SOT-23 | D10 |
| 1 | DMP4065S-7 | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | DNL | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | JK-MSMD050-30 | Resistor_SMD:R_1812_4532Metric | F1 |
| 1 | LM317L_SOT-89 | Package_TO_SOT_SMD:SOT-89-3 | U14 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | LM393 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U15 |
| 1 | MMBTA94 | Package_TO_SOT_SMD:SOT-23 | Q8 |
| 1 | ODB2_J1962 | fp:odb2_b2b | J5 |
| 1 | SN74LVC2G14DBV | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | SS34 | Diode_SMD:D_SMA | D2 |
| 1 | TBD62783A | Package_SO:SSOP-18_4.4x6.5mm_P0.65mm | U10 |
| 1 | TJA1027 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | TLV61046ADB | Package_TO_SOT_SMD:SOT-23-6 | U12 |
| 1 | TPS54160 | Package_SO:HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm_ThermalVias | U2 |
| 1 | TPS92612DBV | Package_TO_SOT_SMD:SOT-23-5 | U13 |
| 1 | UART | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D18 |
| 1 | White | LED_SMD:LED_0603_1608Metric | D3 |
Similar boards
- 2 layers100 × 90 mm

- 4 layers124 × 47 mm

- 2 layers74 × 20 mm

- 4 layers22.9 × 50.8 mm

Lg hvac esp32
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
20 parts2920BSD - 2 layers60 × 90 mm

- 2 layers77.5 × 15 mm

Lin tester
Bartek0x00/USRTLIN-PCB
PCB files and documentation for USRTLIN converter project
37 parts1MIT - 2 layers90 × 56 mm

- 2 layers90 × 98 mm

Questions
How big is the Opendiag PCB?
It measures 37 × 70.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Opendiag use?
148 parts, built around the TJA1051T/3/1, ESP32-S3-WROOM-1-N8, TJA1027T/20 and LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Opendiag KiCad files?
From the maximus64/opendiag-hardware repository on GitHub, at the commit this page was made from: the board is kicad/opendiag.kicad_pcb and its schematic kicad/VARIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Opendiag design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).