2 layers37 × 70.9 mm
Opendiag
maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
148 parts5CERN-OHL-S-2.0
4 layers124 × 47 mm
Sp z sim
svenssonjoel/Z-SIM3Work in progress
- Size
- 124 × 47 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 121
- Nets
- 106
- Pads
- 398
- Tracks, vias
- 1,226, 329
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20191123)
- Created
- 21 Oct 2019
- Updated
- 17 Dec 2019
Overview
Sp z sim is an open-source printed circuit board by svenssonjoel, from the svenssonjoel/Z-SIM repository on GitHub. It is a 4-layer board of 124 × 47 mm with 121 parts on 106 nets, routed with 1,226 tracks and 329 vias.
It is built around the INA240A1PW, OPA549S and TPS54160DGQ, with the TPS54561DPRR and ADR4533BRZ among its other parts. Its parts include 41 capacitors, 36 resistors, 16 connectors, 10 ICs and 6 transistors. It belongs with the STM32 boards of this library.
Main components
5
INA240A1PW
TSSOP-8-40℃~+125℃ -4V~80V 1 1.8mA 132dB 2.7V~5.5V 20V/V 250nV/℃ 2V/us 400kHz 40nV/√Hz@1kHz 5uV 90uA Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface ±80V TSSOP-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
OPA549S
TO-220-11(Forming)-30V~30V -40℃~+85℃ 1 100nA 1mV 20uV/℃ 26mA 50nA 70nV/√Hz@1kHz 8A 8V~60V 900kHz 95dB 9V/us Enable/shutdown function TO-220-11(Forming) Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
TPS54160DGQ
MSOP-10-EP-40℃~+150℃@(TJ) 1 1.5A 116uA 2.5MHz 3.5V~60V 800mV~58V Adjustable Buck Buck Built-in No MSOP-10-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TPS54561DPRR
WSON-10-EP(4x4)-40℃~+150℃@(TJ) 1 152uA 2.5MHz 4.5V~60V 5A 800mV~59V Adjustable Buck Buck Built-in No WSON-10-EP(4x4) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
ADR4533BRZ
SOIC-8-40℃~+125℃ 10mA 2.1uVp-p 2ppm/℃ 3.3V 3.4V~15V 950uA Fixed Series ±0.02% SOIC-8 Voltage Reference ROHSAnalog DevicesVoltage Reference
Parts
121| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C7, C8, C22, C23, C24, C25, C26, C27, C29, C30, C40, C41 +1 |
| 13 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R9, R10, R11, R12, R13, R15, R16 |
| 6 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C6, C10, C31, C33, C36, C37 |
| 6 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C4, C11, C12, C13, C28 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C15, C18, C19, C35 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8, R20 |
| 3 | 2.2k | Resistor_SMD:R_0603_1608Metric | R18, R28, R30 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R35, R36 |
| 2 | 39k | Resistor_SMD:R_0603_1608Metric | R27, R29 |
| 2 | 6.8n | Capacitor_SMD:C_0603_1608Metric | C32, C39 |
| 2 | Heatsink_Pad | rise_elp:OMNI-220-18-50-2C | HS1, HS2 |
| 2 | INA240A1PW | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U2, U4 |
| 2 | OPA549 | Package_TO_SOT_THT:TO-220-11_P3.4x5.08mm_StaggerOdd_Lead4.85mm_Vertical | U1, U3 |
| 2 | SCH | Diode_SMD:D_SMA | D3, D4 |
| 2 | TEMP1 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2, J3 |
| 2 | r_shunt_lvk | Resistor_SMD:R_Shunt_Ohmite_LVK24 | R14, R17 |
| 1 | 0.01u | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 120p | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 16.9k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 16k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 22u | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L2 |
| 1 | 243k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 4700p | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C38 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 4T_1 | TestPoint:TestPoint_Pad_4.0x4.0mm | J8 |
| 1 | 4T_2 | TestPoint:TestPoint_Pad_4.0x4.0mm | J9 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 7.2u | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 8k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | ADC_EXTRA | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J10 |
| 1 | ADR4533BRZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U10 |
| 1 | CAL_3.3 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J13 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_Abracon_ABM3C-4Pin_5.0x3.2mm | Y1 |
| 1 | FAN | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J15 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | IN+ | TestPoint:TestPoint_Pad_4.0x4.0mm | J11 |
| 1 | IN- | TestPoint:TestPoint_Pad_4.0x4.0mm | J12 |
| 1 | Micro_SD_Card_Det | Connector_Card:microSD_HC_Hirose_DM3D-SF | J5 |
| 1 | OUT1 | TestPoint:TestPoint_Pad_4.0x4.0mm | J6 |
| 1 | OUT2 | TestPoint:TestPoint_Pad_4.0x4.0mm | J7 |
| 1 | PDS760-13 | POWERDI5:POWERDI5 | U5 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U7 |
| 1 | SWD | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J4 |
| 1 | TPS54160 | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U9 |
| 1 | TPS54561DPRR | rise_elp:TI-DPR | U6 |
| 1 | TP_AMP | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J16 |
| 1 | TP_DAC | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J14 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 4 layers130 × 200 mm
- 6 layers148 × 121 mm
- 4 layers50 × 40 mm
RAPS-5 V1
itsTasos/RAPS-5
Dual-input power module with independent LiPo protection, buck conversion and ideal-diode OR-ing.
96 parts - 4 layers75 × 41 mm
- 2 layers36.5 × 56 mm
- 4 layers58 × 59.3 mm
- 4 layers60 × 60 mm
Questions
How big is the Sp z sim PCB?
It measures 124 × 47 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sp z sim use?
121 parts, built around the INA240A1PW, OPA549S, TPS54160DGQ and TPS54561DPRR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sp z sim KiCad files?
From the svenssonjoel/Z-SIM repository on GitHub, at the commit this page was made from: the board is sp_z_sim.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sp z sim design in my own project?
Its repository states no licence, so its author keeps all rights: ask svenssonjoel before reusing the design.