Skip to the content
123

DMP4065S-7

Diodes IncorporatedExtended

-55℃~+150℃ 1 P-Channel 1.4W 100mΩ@4.5V 12.2nC@10V 3.4A 40V 40pF 587pF 88pF SOT-23 MOSFETs ROHS

Part id
diodes/DMP4065S-7
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
6,448 at JLCPCB (C182476)
Used on
10 open-source boards

Overview

The DMP4065S-7 is a MOSFET made by Diodes Incorporated in a SOT-23 package with 3 pins. -55℃~+150℃ 1 P-Channel 1.4W 100mΩ@4.5V 12.2nC@10V 3.4A 40V 40pF 587pF 88pF SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 6,448 are in stock at JLCPCB (part C182476). 10 open-source boards in 8 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

11
Drain-source, most
40 V · VDSS, absolute maximum · p. 2
Gate-source, most
20 V · VGSS, absolute maximum magnitude, ±20 V · p. 2
Drain current, most
2.4 A · ID, continuous max at TA = +25°C, VGS = -10V, minimum recommended pad layout · p. 2
Drain current, most
3.4 A · ID, continuous max at TA = +25°C, VGS = -10V, 1inch square copper plate · p. 2
On resistance
80 mΩ · max, VGS = -10V, ID = -4.2A · p. 3
On resistance
100 mΩ · max, VGS = -4.5V, ID = -3.3A · p. 3
Gate threshold
3 V · max, VDS = VGS, ID = -250uA · p. 3
Junction, hottest
150 °C · TJ, max operating junction temperature · p. 2
Junction to air (SOT23 (Standard))
171 K/W · junction to ambient at TA = +25°C, minimum recommended pad layout · p. 2
Junction to air (SOT23 (Standard))
90 K/W · junction to ambient at TA = +25°C, 1inch square copper plate · p. 2
Edge
2.9 ns · typical rise time, VDD = -15V, VGS = -10V, ID = -1.0A, RG = 6Ω · p. 3

What it is and has

3
Device
40V P-channel enhancement mode MOSFET · p. 1
Package
SOT23 · p. 1
Moisture sensitivity
Level 1 per J-STD-020 · p. 1

Specifications

31
ParameterConditionsAs printedPage
Drain-Source Voltage VDSSTA = +25°Cmax -40 V2
Gate-Source Voltage VGSSTA = +25°Cmin -20 · max 20 V2
Continuous Drain Current (Note 5) VGS = -10V IDSteady State, TA = +25°C; FR-4 substrate PC board, 2oz copper, minimum recommended pad layoutmax -2.4 A2
Continuous Drain Current (Note 5) VGS = -10V IDSteady State, TA = +70°C; FR-4 substrate PC board, 2oz copper, minimum recommended pad layoutmax -1.9 A2
Continuous Drain Current (Note 6) VGS = -10V IDSteady State, TA = +25°C; FR-4 substrate PC board, 2oz copper, 1inch square copper platemax -3.4 A2
Continuous Drain Current (Note 6) VGS = -10V IDSteady State, TA = +70°C; FR-4 substrate PC board, 2oz copper, 1inch square copper platemax -2.7 A2
Pulsed Drain Current IDMTA = +25°Cmax -20 A2
Power Dissipation (Note 5) PDFR-4 substrate PC board, 2oz copper, minimum recommended pad layoutmax 0.72 W2
Thermal Resistance, Junction to Ambient @TA = +25°C (Note 5) RθJASOT23 (Standard); FR-4 substrate PC board, 2oz copper, minimum recommended pad layoutmax 171 °C/W2
Power Dissipation (Note 6) PDFR-4 substrate PC board, 2oz copper, 1inch square copper platemax 1.4 W2
Thermal Resistance, Junction to Ambient @TA = +25°C (Note 6) RθJASOT23 (Standard); FR-4 substrate PC board, 2oz copper, 1inch square copper platemax 90 °C/W2
Operating and Storage Temperature Range TJ, TSTGmin -55 · max 150 °C2
Drain-Source Breakdown Voltage BVDSSVGS = 0V, ID = -250uA; Note 7min -40 V3
Zero Gate Voltage Drain Current TJ = +25°C IDSSVDS = -40V, VGS = 0V; Note 7max -1 uA3
Gate-Source Leakage IGSSVGS = ±20V, VDS = 0V; Note 7; maximum magnitude ±100 nAmax 100 nA3
Gate Threshold Voltage VGS(TH)VDS = VGS, ID = -250uA; Note 7min -1 · max -3 V3
Static Drain-Source On-Resistance RDS(ON)VGS = -10V, ID = -4.2A; Note 7typ 64 · max 80 mΩ3
Static Drain-Source On-Resistance RDS(ON)VGS = -4.5V, ID = -3.3A; Note 7typ 85 · max 100 mΩ3
Diode Forward Voltage VSDVGS = 0V, IS = -1A; Note 7typ -0.7 · max -1.2 V3
Input Capacitance CissVDS = -20V, VGS = 0V, f = 1.0MHz; Note 8typ 587 pF3
Output Capacitance CossVDS = -20V, VGS = 0V, f = 1.0MHz; Note 8typ 88 pF3
Reverse Transfer Capacitance CrssVDS = -20V, VGS = 0V, f = 1.0MHz; Note 8typ 40 pF3
Gate Resistance RgVDS = 0V, VGS = 0V, f = 1MHz; Note 8typ 4 Ω3
Total Gate Charge (VGS = -4.5V) QgVDS = -20V, ID = -4.2A; Note 8typ 6.1 nC3
Total Gate Charge (VGS = -10V) QgVDS = -20V, ID = -4.2A; Note 8typ 12.2 nC3
Gate-Source Charge QgsVDS = -20V, ID = -4.2A; Note 8typ 1.8 nC3
Gate-Drain Charge QgdVDS = -20V, ID = -4.2A; Note 8typ 2.4 nC3
Turn-On Delay Time tD(ON)VDD = -15V, VGS = -10V, ID = -1.0A, RG = 6Ω; Note 8typ 3.6 ns3
Turn-On Rise Time tRVDD = -15V, VGS = -10V, ID = -1.0A, RG = 6Ω; Note 8typ 2.9 ns3
Turn-Off Delay Time tD(OFF)VDD = -15V, VGS = -10V, ID = -1.0A, RG = 6Ω; Note 8typ 36.3 ns3
Turn-Off Fall Time tFVDD = -15V, VGS = -10V, ID = -1.0A, RG = 6Ω; Note 8typ 15.3 ns3

Ordering codes, by the datasheet

2
DMP4065S-7
SOT23 (Standard) · 3,000/Tape & Reel · p. 1
DMP4065S-13
SOT23 (Standard) · 10,000/Tape & Reel · p. 1

Open-source boards using it

10See all 10
  • 2 layers37 × 70.9 mmOpendiag, the printed circuit board in 3D

    Opendiag

    maximus64/opendiag-hardware

    OpenDIAG - Open Source OBD2 Interface (Hardware)

    148 parts5CERN-OHL-S-2.0
  • 4 layers63.2 × 70.5 mmHomectrl v2, the printed circuit board in 3D

    Homectrl v2

    jeevan9s/homectrl-sys

    home automation controller

    141 parts2
  • 4 layers89.5 × 62.6 mmPenguin, the printed circuit board in 3D

    Penguin

    jeevan9s/penguin-bot

    intelligent hybrid robot

    165 parts1
  • 4 layers69.5 × 60 mmHydra, the printed circuit board in 3D

    Hydra

    Queens-Rocket-Engineering-Team/av-hardware

    ECAD for SRAD Avionics hardware

    151 parts1
  • 2 layers72.8 × 38 mmFanControl, the printed circuit board in 3D

    FanControl

    bakadave/fanControl

    104 parts
  • 2 layers84.3 × 24.1 mmChannel Two v2, the printed circuit board in 3D

    Channel Two v2

    bassistTech/ChannelTwoPreamp

    Design of compact bass preamp for adding second input to an amp.

    54 parts
  • 4 layers163 × 117 mmTeensy 4.1 + Jetson Nano powered from board, the printed circuit board in 3D

    Teensy 4.1 + Jetson Nano powered from board

    olexsu/inos-rev-a-robotics-controller

    INOS Rev A — CAN-based robotic arm controller designed as a real-time motion-control node for NVIDIA Jetson robotics systems.

    157 partsMIT
  • 4 layers69.5 × 62.6 mmPegasus, the printed circuit board in 3D

    Pegasus

    Queens-Rocket-Engineering-Team/av-hardware

    ECAD for SRAD Avionics hardware

    110 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DMP4065S-7?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMP4065S-7?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the DMP4065S-7 datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the DMP4065S-7?

JLCPCB lists it as part C182476, with 6,448 in stock; the sellers' links on this page open their listings.

What can replace the DMP4065S-7?

Parts like it in the library: the AP40P05 by ALLPOWER, the 5N10-MS by MSKSEMI, the SI2318CDS by Vishay Intertechnology and the SI2319 by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMP4065S-7?

10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.