
Channel Two Jacks
bassistTech/ChannelTwoPreamp
Design of compact bass preamp for adding second input to an amp.

Design of compact bass preamp for adding second input to an amp.
Channel Two v2 is an open-source printed circuit board by bassistTech, from the bassistTech/ChannelTwoPreamp repository on GitHub. It is a 2-layer board of 84.3 × 24.1 mm with 54 parts on 40 nets, routed with 337 tracks and 18 vias.
It is built around the OPA1654AID and DMP4065S-7. Its parts include 25 resistors, 16 capacitors, 4 connectors, 2 ICs and 2 diodes. It belongs with the audio and music boards of this library.
Compact bass preamp for adding second input to an existing amplifier

Here's the main design article for version 1.
This repository is my entire project folder so there are a lot of extraneous files. I've listed the most important ones here.
.\Modeling\Channel Two model circuit v1.asc = LTSpice modeling circuit
.\Docs\Build journal - v1.pdf = Build notes for version 1
.\Docs\Channel Two Preamp.ipynb = Main documentation for the project
.\KiCad project\Channel Two v2\Channel Two v2 BOM.csv = Bill of materials
.\KiCad project\Channel Two v2\CAM20241109\CAM20241109a.zip = Gerber files for upload to PCB manufacturer
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | dc | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C14, C15, C16 |
| 4 | 120k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R17, R18 |
| 4 | 130k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R22, R23, R24 |
| 4 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R12, R13, R14 |
| 4 | 82n | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C7, C8, C9, C10 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R9, R25 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5 |
| 3 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8, R11 |
| 2 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | 10M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 33n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | OPA1654 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 100k Audio "HPF" | FJD_HPF:Potentiometer_Alpha_RV122F | RV4 |
| 1 | 100k Linear "Bass" | FJD_HPF:Potentiometer_Alpha_RV120F | RV2 |
| 1 | 100k Linear "Treble" | FJD_HPF:Potentiometer_Alpha_RV120F | RV3 |
| 1 | 10k Linear "Gain" | FJD_HPF:Potentiometer_Alpha_RV120F | RV1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 47n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 51 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | Aux Input | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | BX84C4V3-G3-08 4.3 V | Package_TO_SOT_SMD:TSOT-23_HandSoldering | D2 |
| 1 | DMP4065S-7 | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | Main Input | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | Out | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J3 |
| 1 | Power Input | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J4 |

bassistTech/ChannelTwoPreamp
Design of compact bass preamp for adding second input to an amp.

aheinous/usb_hexaphonic_soundcard
USB soundcard with six inputs. Designed for use with hexaphonic guitar pickups.




maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)



It measures 84.3 × 24.1 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the OPA1654AID and DMP4065S-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bassistTech/ChannelTwoPreamp repository on GitHub, at the commit this page was made from: the board is KiCad project/Channel Two v2/Channel Two v2.kicad_pcb and its schematic KiCad project/Channel Two Jacks/Channel Two Jacks.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bassistTech before reusing the design.