Skip to the content
2 layers115 × 67.5 mmAudio Interface rewire, the printed circuit board in 3D

Audio Interface rewire

Gadu1in/audio-interface-pcm2906

An audio interface designed for low impedance earbuds and an external 3.5mm microphone input

Size
115 × 67.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
62
Nets
62
Pads
190
Tracks, vias
395, 34
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Nov 2022
Updated
17 Feb 2023

Overview

Audio Interface rewire is an open-source printed circuit board by Gadu1in, from the Gadu1in/audio-interface-pcm2906 repository on GitHub. It is a 2-layer board of 115 × 67.5 mm with 62 parts on 62 nets, routed with 395 tracks and 34 vias.

It is built around the PCM2906CDB, NMA0515SC and BAT54_R1_00001, with the SJ-435107RS among its other parts. Its parts include 21 capacitors, 17 resistors, 4 ICs, 3 diodes and 2 connectors. It belongs with the audio and music and interfaces and adapters boards of this library.

Main components

4

Parts

62
QtyValueFootprintReferences
51uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C9, C10, C11, C12
41k5Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3, R4, R5
42k2Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R11, R16, R17
4M4MountingHole:MountingHole_4.3mm_M4_PadH1, H2, H3, H4
310uFCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC6, C13, C14
322uFCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC17, C18, C21
2100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR14, R15
21kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R8
222Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7
22200uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C3
22200uF 16 VCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC19, C20
227pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC15, C16
23k9Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R13
24u7FCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC7, C8
25kIC_Downloaded:3362P_1RV1, RV2
1100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
112MHzIC_Downloaded:HC49US12000000ABJBY1
11MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
1BAT54_R1_00001Package_TO_SOT_SMD:SOT-323_SC-70_HandsolderingD2
1CONTINUEDiode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolderD3
1External mic. conn.Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_VerticalJ6
1HID0Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_VerticalMUTE
1HID1Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_VerticalV-UP
1HID2Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_VerticalV-DOWN
1INA849DGKTIC_Downloaded:SOP65P490X110-8NIC3
1J304Package_TO_SOT_SMD:SOT-23Q1
1NMA0515SCConverter_DCDC:Converter_DCDC_Murata_NMAxxxxSC_THTU1
1PCM2906CDBIC_Downloaded:SOP65P780X200-28NIC2
1PWR_ONDiode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1REG103GA-3.3_2K5IC_Downloaded:SOT127P706X180-6NIC1
1SJ-435107RSIC_Downloaded:SJ435107RSAudio Jack
1SW_PUSH_3PDTConnector_JST:JST_XH_B9B-XH-AM_1x09_P2.50mm_VerticalJ5
1USB_B_MicroConnector_USB:USB_B_Lumberg_2411_02_HorizontalUSB MICRO
1Vol. knob1 22kConnector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_VerticalEM-KNOB
1Vol. knob2 22kConnector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_VerticalIM-KNOB

Similar boards

  • 4 layers50 × 25 mmDac, the printed circuit board in 3D

    Dac

    77volatile77/TI-USB-Audio-Devboard

    A breadboard adapter for the PCM2906C: A USB 1.1 audio codec made by Texas Instruments. Note: the way the header pinout is defined, this board is only intended to be used as a DAC.

    34 partsMIT
  • 4 layers92 × 70.5 mmDacAmp, the printed circuit board in 3D

    DacAmp

    77volatile77/USB-Headphone-Amplifier

    111 parts
  • 2 layers75.5 × 24.5 mmUsb interface, the printed circuit board in 3D

    Usb interface

    rkiendl/oe2lsp_USB-Interface

    primitive and simple USB interfave for classic Ham Radio transceivers. - Brings the TRX to the 21st century and makes the operation of digi modes reliable and easy. - No more cables and adapters - KiCad based

    97 partsCC0-1.0
  • 2 layers35.9 × 47 mmDIY Mic, the printed circuit board in 3D

    DIY Mic

    TrojanPinata/DIY-Mic

    A DIY microphone built using the design of DIY Perks and modified by me

    23 parts36
  • 2 layers72.9 × 38.7 mmRed pitaya pwm shield, the printed circuit board in 3D

    Red pitaya pwm shield

    atomlaser-lab/iq-bias-control

    Digital bias controller for IQ single-sideband modulation using a Red Pitaya STEMlab board

    54 parts7
  • 2 layers36.5 × 63 mmMic pcb, the printed circuit board in 3D

    Mic pcb

    lmarzen/diy-microphone

    This project contributes a KiCad PCB design that implements the circuit described in the DIY Perks Microphone Project v1, https://www.youtube.com/watch?v=LoQu3XXIayc.

    24 parts4GPL-3.0
  • 2 layers86.5 × 63.3 mmMicrophone, the printed circuit board in 3D

    Microphone

    not-sample-text/diy-usb-c-mic

    25 parts

Questions

How big is the Audio Interface rewire PCB?

It measures 115 × 67.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Audio Interface rewire use?

62 parts, built around the PCM2906CDB, NMA0515SC, BAT54_R1_00001 and SJ-435107RS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Audio Interface rewire KiCad files?

From the Gadu1in/audio-interface-pcm2906 repository on GitHub, at the commit this page was made from: the board is Audio_Interface_rewire.kicad_pcb and its schematic Audio_Interface_rewire.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Audio Interface rewire design in my own project?

Its repository states no licence, so its author keeps all rights: ask Gadu1in before reusing the design.