2 layers48.3 × 17.8 mm
Arduino Micro
ZiroEDA/ziro-designer
KiCad 10 in the browser: open, edit and share real schematic and PCB projects with nothing to install. GPL-3.0, end-to-end encrypted cloud projects.
6 parts58GPL-3.0
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers77.7 × 166.3 mm
Delta pico
AaronC81/delta-pico
Powerful scientific calculator based on the Raspberry Pi Pico
84 parts57MIT - 8 layers110 × 90 mm
Lpddr4-test board
antmicro/lpddr4-test-board
Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM
497 parts57Apache-2.0 - 2 layers22.9 × 11.4 mm
AutoEG2
Ausdauersportler/IMAC-EFI-BOOT-SCREEN
How to create an EFI boot screen vBIOS for Apple Late 2009 to Mid 2011 iMac systems using AMD MXM graphics cards
13 parts57GPL-3.0 - 8 layers
RoyalBlue54L Feather
buildwithtrace/trace-public
Official source code of Trace, an AI-native PCB design tool.
2 parts57GPL-3.0 - 2 layers187.9 × 127.2 mm
Dya panelized
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball
269 parts57CC-BY-4.0 - 4 layers51.4 × 60.6 mm
Gb rp2040 cart
deltabeard/DBGC
A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.
67 parts57 - 2 layers116.8 × 73.7 mm
DuPal V3
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
133 parts57CC-BY-SA-4.0 - 2 layers30.5 × 57 mm
Sequence Controller
ericgu/Fade
Fade is an ESP32-based animation system. It can drive WS2812/Neopixel addressable LEDs, PWM-based devices (LEDs or anything else that supports PWM), and hobby servo motors.
12 parts57 - 4 layers58 × 38 mm
Qspimux2-prog
felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests
99 parts57CC-BY-SA-4.0 - 4 layers32.8 × 36.3 mm
Esp32
gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System
68 parts57GPL-3.0 - 2 layers300 × 20 mm
External PCB
Hackuarium/simple-spectro
Very cheap, autonomous and precise spectrophotometer for DIY biology and chemistry.
5 parts57 - 2 layers69.1 × 68.1 mm
Keyboard
hamishcoleman/thinkpad-usbkb
Experimental hardware to convert thinkpad keyboards to usb
78 parts57GPL-2.0 - 2 layers144.8 × 88.9 mm
- 2 layers99.7 × 80 mm
- 2 layers352.5 × 120 mm
PyKey87
jpconstantineau/PyKey60
The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).
310 parts57 - 2 layers37 × 28 mm
Pin interposer
MaxMaeder/OpenPin
OpenPin: use your Humane Ai Pin again. Installable in a few clicks & without any ADB certs!
4 parts57 - 2 layers119.9 × 77.8 mm
- 2 layers164 × 73 mm
- 2 layers407 × 184 mm
TRS-80-Model I G E1
RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G
230 parts57MIT - 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 2 layers243.9 × 136.5 mm
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57 - 2 layers33.1 × 43.8 mm
ThrottleBlaster
scrapcomputing/ThrottleBlaster
A Turbo circuit with a MHz display that can slow down the CPU speed
34 parts57GPL-2.0 - 2 layers71.1 × 24.1 mm
Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57