
Dya right
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

DYA Dash portable wireless split keyboard with 25mm trackball
Dya panelized is an open-source printed circuit board by cormoran, from the cormoran/dya-dash-keyboard repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 187.9 × 127.2 mm with 269 parts on 210 nets, routed with 3,008 tracks and 298 vias.
It is built around the TPS61021ADSG and SK6812. Its parts include 14 capacitors and 8 connectors. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

Firmware is available in https://github.com/cormoran/zmk-keyboard-dya-dash.
You can download pre-built binaries in the release page.
The firmware supports keymapping update with ZMK studio.
Left side schematic




4x2 LEDs indicates battery level, connected BLE/USB profiles and active layers depending on the setting. The schematic and firmware driver is optimized for battery usage. LED modules consume power only when required.
[!NOTE] The picture is old version's one

Now on sale in https://cormoran707.booth.pm/
完全なコピー品が販売された場合に対応できるように PCB 設計を流用して販売することは禁止していますが、回路設計を真似たり似たような設計のキーボードを作ることを牽制したりする意図はありません。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 84 | D | Diode_SMD:D_SOD-123 | DL1, DL2, DL10, DL11, DL12, DL13, DL14, DL15, DL16, DL17, DL18, DL19, DL20, DL21, DL22, DL23 +68 |
| 46 | SW_Push_45deg | 0_dya-kbd:Kailh-PG1353-Hotswap-1U | SWL1, SWL2, SWL10, SWL11, SWL12, SWL13, SWL14, SWL15, SWL16, SWL17, SWL18, SWL19, SWL20, SWL21, SWL22, SWL23 +30 |
| 16 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | QL1, QL2, QL3, QL4, QL5, QL6, QL7, QL8, QR1, QR2, QR3, QR4, QR5, QR6, QR7, QR8 |
| 14 | Val** | 0_kbd_Hole:Mouse_Bite_Hole | Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** |
| 12 | 100Ω | Resistor_SMD:R_0805_2012Metric | RL5, RL8, RL9, RL10, RL11, RL15, RR5, RR8, RR9, RR10, RR11, RR15 |
| 8 | 100kΩ | Resistor_SMD:R_0805_2012Metric | RL1, RL4, RL12, RL13, RR1, RR4, RR12, RR13 |
| 8 | SK6812 | 0_dya-kbd:LED_SK6812MINI-E_BL | LED_L1, LED_L2, LED_L3, LED_L4, LED_R1, LED_R2, LED_R3, LED_R4 |
| 8 | ~ | Capacitor_SMD:C_0805_2012Metric | CL1, CL2, CL3, CL4, CR1, CR2, CR3, CR4 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric | CL5, CL7, CL8, CR5, CR7, CR8 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C8, P2_C1, P2_C8 |
| 4 | 470kΩ | Resistor_SMD:R_0805_2012Metric | RL3, RL6, RR3, RR6 |
| 4 | Conn_01x01_Pin | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TL3, TL4, TR3, TR4 |
| 4 | Conn_01x01_Pin | MountingHole:MountingHole_2.2mm_M2_Pad | TL1, TL2, TR1, TR2 |
| 4 | SW_Push_45deg | 0_dya-kbd:Push_PTS636SM43SMTR | SWL24, SWL25, SWR27, SWR28 |
| 2 | 0.47uH | Inductor_SMD:L_1008_2520Metric | LL1, LR1 |
| 2 | 100nF X7R | Capacitor_SMD:C_0603_1608Metric | C5, P2_C5 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C6, P2_C6 |
| 2 | 10nF X7R | Capacitor_SMD:C_0603_1608Metric | C4, P2_C4 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C7, P2_C7 |
| 2 | 10uF X7R | Capacitor_SMD:C_0603_1608Metric | C3, P2_C3 |
| 2 | 150kΩ | Resistor_SMD:R_0805_2012Metric | RL7, RR7 |
| 2 | 1MΩ | Resistor_SMD:R_0805_2012Metric | RL2, RR2 |
| 2 | 1kΩ | Resistor_SMD:R_0805_2012Metric | RL14, RR14 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | CL6, CR6 |
| 2 | 51kΩ | Resistor_SMD:R_0603_1608Metric | P2_R1, R1 |
| 2 | BU42 | 0_dya-kbd:BU42XX | UL3, UR3 |
| 2 | Conn_01x02_Pin | 0_dya-kbd:AAA-battery | JL4, JR4 |
| 2 | Conn_01x04 | 0_dya-kbd:JUSHUO-AFH34-S06FIA-1H | JL3, JR3 |
| 2 | Conn_01x06_Pin | 0_pmw3610-breakout:JUSHUO-AFH34-S06FIA-1H | J1, P2_J1 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JPL1, JPR1 |
| 2 | PMW3610 | 0_pmw3610-breakout:PMW3610DM-SUDU 16Pin | P2_U1, U1 |
| 2 | SW_SPDT | 0_dya-kbd:MK-12C02-G015 | SW_BATL1, SW_BATR1 |
| 2 | TLV70018_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | P2_U2, U2 |
| 2 | TPS61021A | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | UL2, UR2 |
| 2 | TTP224 | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | UL4, UR4 |
| 2 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | JL1, JR1 |
| 2 | XIAO-nRF52840-SMD | 0_dya-kbd:XIAO-nRF52840-SMD | UL1, UR1 |
| 1 |

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball

DasBasti/NokiaRetroFit
Retrofitting a Nokia 3210 with modern Processor

cormoran/dya2-keyboard
Wireless split keyboard with trackball, touch sensor and AAA battery

gohanda11/HEball
A split keyboard powered by Hall Effect (magnetic) switches with a trackball on the right half.



ldab/SARA-Rx-application-board
SARA-R4 NB-IoT + Cat-M1 + GNSS application board - NINA-B3 with Secure MQTT


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 187.9 × 127.2 mm and has 2 copper layers, 1.29 mm thick.
269 parts, built around the TPS61021ADSG and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cormoran/dya-dash-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/dya-dash/panelized-no-arrow/dya-panelized.kicad_pcb and its schematic hardware/dya-dash-v3/5pin-magnet-fpc/5pin-magnet-fpc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).