
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

Experimental hardware to convert thinkpad keyboards to usb
Keyboard is an open-source printed circuit board by hamishcoleman, from the hamishcoleman/thinkpad-usbkb repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 69.1 × 68.1 mm with 78 parts on 85 nets, routed with 2,130 tracks and 217 vias.
It is built around the MCP1700-2202E/TT and BSS138. Its parts include 42 resistors, 13 capacitors, 9 connectors, 4 diodes and 3 ICs. It belongs with the keyboards and input boards and the Silicon Labs (EFR32, EFM) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R pullup | SM0805 | R3, R4, R5, R6, R7, R8, R9, R10 |
| 7 | 100nF | SM0805 | C5, C6, C7, C8, C9, C11, C12 |
| 6 | 10K | SM0805 | R21, R23, R24, R25, R26, R27 |
| 6 | GND? | SM0805 | R2, R12, R16, R17, R18, R20 |
| 5 | DNP | SM0805 | R32, R33, R36, R41, R42 |
| 4 | R led | SM0805 | R1, R13, R14, R15 |
| 3 | 1uF | SM0805 | C1, C2, C10 |
| 3 | BSS138 | SOT23 | Q1, Q2, Q3 |
| 2 | 1N4148 | SM0805 | D1, D2 |
| 2 | 22R | SM0805 | R37, R38 |
| 2 | 4.7K | SM0805 | R28, R29 |
| 2 | C | SM0805 | C3, C4 |
| 2 | DNP | Resistors_SMD:R_0805 | R30, R31 |
| 2 | R0 | SM0805 | R22, R34 |
| 2 | ZENERSMALL | SM0805 | D3, D4 |
| 1 | 1.5K | SM0805 | R35 |
| 1 | 100R | SM0805 | R39 |
| 1 | 10uF | SM0805 | C13 |
| 1 | 3V? | SM0805 | R19 |
| 1 | 4K | SM0805 | R40 |
| 1 | 5V? | SM0805 | R11 |
| 1 | ARM debug header | pin_array_10x2 | P5 |
| 1 | CONN-PALM-FOLD-KB | conn-palm-fold-kb | J1 |
| 1 | CONN-X220-KB | AA01B-S040VA1:AA01B-S040VA1 | U1 |
| 1 | CRYSTAL | HC-49V | X1 |
| 1 | EFM32G222F32 | EFM32_TQFP48 | U3 |
| 1 | MCP1700-2202E/TT | SOT23 | U2 |
| 1 | P1: Keyboard Even | SIL-26 | P1 |
| 1 | P2: Keyboard Odd | SIL-26 | P2 |
| 1 | PS2 | SIL-6 | P3 |
| 1 | Palm Serial | SIL-6 | P4 |
| 1 | Power | Pin_Headers:Pin_Header_Straight_1x04 | P6 |
| 1 | SW_PUSH | SM0805 | SW1 |
| 1 | USB-MICRO-B | Connect:USB_Micro-B | CON1 |
| 1 | USB_H | Pin_Headers:Pin_Header_Straight_1x04 | P7 |
The 76 most common of 78 parts.

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

It measures 69.1 × 68.1 mm and has 2 copper layers, 1.6 mm thick.
78 parts, built around the MCP1700-2202E/TT and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hamishcoleman/thinkpad-usbkb repository on GitHub, at the commit this page was made from: the board is keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).