Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 6 layers100.7 × 106.4 mmSignal processing unit, the printed circuit board in 3D

    Signal processing unit

    scalinq-lab/cryomagsens

    The sensor unit was designed in KiCad 10 and manufactured by JLCPCB. It is built in a flex PCB material to achieve a very small build height, in order to come very close to the device under test.

    178 parts2CERN-OHL-P-2.0
  • 2 layers230 × 17.5 mmLighting for printopus, the printed circuit board in 3D

    Lighting for printopus

    scattercat-123/Printopus

    The ultimate 3d printer built by me.

    19 parts2
  • 2 layers295.3 × 98.3 mmRp2040, the printed circuit board in 3D

    Rp2040

    ScatteredDrifter/Stucco_15-10

    ortho pcb for the eponymous keyboard

    183 parts2CERN-OHL-P-2.0
  • 4 layers271.8 × 147.3 mmSF68, the printed circuit board in 3D

    SF68

    scefrom/SF68

    A board featuring the Motorola 68000

    130 parts2
  • 2 layers50 × 25 mmLuminO, the printed circuit board in 3D

    LuminO

    Schneckenkoenig/LuminO

    Softskills Winter Project Carl von Ossietzky Universität Oldenburg

    4 parts2
  • 2 layers28.5 × 20.8 mmNoaa, the printed circuit board in 3D

    Noaa

    scooterthedev/noaa-ant

    18 parts2
  • 2 layers169 × 81 mmSG mesocosm pi interface, the printed circuit board in 3D

    SG mesocosm pi interface

    scott-whitworth/bancroft_temperature_control

    Supplementary material for Bancroft Experimental Temperature Control System

    77 parts2
  • 4 layers95 × 58 mmEsp32Tap, the printed circuit board in 3D

    Esp32Tap

    scottmsilver/treddy

    Controlling my procor-9.3x treadmill

    94 parts2
  • 2 layers84.4 × 54.4 mmNrf52840-uno, the printed circuit board in 3D

    Nrf52840-uno

    scottyob/nrf52840-uno

    A development board for the nRF52840 in a Uno form factor

    35 parts2MIT
  • 4 layers36 × 48.1 mmInductive encoder, the printed circuit board in 3D

    Inductive encoder

    Scouttman/AS5715R

    Inductive encoder based off the as5715r from AMS

    20 parts2MIT
  • 2 layers61 × 78.7 mmESP RGB LED, the printed circuit board in 3D

    ESP RGB LED

    Sean-AP/ESP-RGB-LED

    MicroPython module for controlling an RGB LED strip

    10 parts2
  • 4 layers36 × 44.5 mmCompass extender, the printed circuit board in 3D

    Compass extender

    sean-o-sullivan/octowhere-pcb

    daughterboard that adds lora and magnetometer to the waveshare module

    36 parts2
  • 2 layers75 × 75 mmOperame, the printed circuit board in 3D

    Operame

    sebastius/Operame_v1

    Hardware voor Operame v1

    7 parts2CC0-1.0
  • 2 layers95.5 × 61 mmPrecharge, the printed circuit board in 3D

    Precharge

    sebgothard/FS_Electronics

    Projects for Formula Student UK competition 2024-25.

    44 parts2GPL-3.0
  • 2 layers42 × 43.5 mmInterlockSplitterCombiner06, the printed circuit board in 3D

    InterlockSplitterCombiner06

    sebleedelisle/netstop

    All files for my netstop system that combines network and interlock cables for laser control.

    8 parts2
  • 2 layers302.6 × 98.7 mmMonoSeb40, the printed circuit board in 3D

    MonoSeb40

    seblov/zmk-config-monoseb40

    Zmk Firmware for the MonoSeb40 Board

    83 parts2
  • 2 layers82.6 × 50.2 mmMagicQuartz Mega, the printed circuit board in 3D

    MagicQuartz Mega

    sebmate/MagicQuartz-TechDemo

    Turntable speedbox implementation for the MagicQuartz firmware

    33 parts2
  • 2 layers42.7 × 45 mmBluetooth, the printed circuit board in 3D

    Bluetooth

    seed17/QFN48-nRF52811-Bluetooth-5.1-KiCad-and-Altium-Designer

    The original schematic and files were designed and downloaded as Altium designer files. Afte they were edited to make the dev board, this repo was used: https://github.com/thesourcerer8/altium2kicad to convert the…

    56 parts2MIT
  • 2 layers35 × 26.8 mmDefinitely not a fire hazard, the printed circuit board in 3D

    Definitely not a fire hazard

    seidenstrasse/capsules

    3D printable models and schematics for capsule bodies and electronics

    34 parts2MIT
  • 2 layers19 × 108 mmArduinoMICRACK, the printed circuit board in 3D

    ArduinoMICRACK

    seismicindustries/arduinoMICRACK

    a eurorack mountable version of the arduino micro.

    41 parts2
  • 2 layers34 × 31 mmMP3Player, the printed circuit board in 3D

    MP3Player

    semihtuncer/MP3Player

    An MP3 Player I Made Using ESP32 and Custom PCB's.

    7 parts2
  • 2 layers60 × 54 mmLF4, the printed circuit board in 3D

    LF4

    SendhanS/Linefollower-LF3

    LF3 is a DIY line follower robot designed from scratch

    15 parts2MIT
  • 2 layers163.4 × 100.6 mmArm Mainboard, the printed circuit board in 3D

    Arm Mainboard

    SensaGroup/RoboticArm

    Genral repository for files pertaining to the robotic arm that is part of SENSA GROUP education.

    113 parts2MIT