4 layers44.8 × 55.9 mm
Main project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915
4 layers36 × 48.1 mm
Inductive encoder
Scouttman/AS5715R2Inductive encoder based off the as5715r from AMS
- Size
- 36 × 48.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 14
- Pads
- 52
- Tracks, vias
- 4,409, 49
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Dec 2021
- Updated
- 1 Jun 2025
Overview
Inductive encoder is an open-source printed circuit board by Scouttman, from the Scouttman/AS5715R repository on GitHub, published under the MIT licence. It is a 4-layer board of 36 × 48.1 mm with 20 parts on 14 nets, routed with 4,409 tracks and 49 vias.
Its parts include 10 capacitors, 4 resistors, 1 IC and 1 connector.
README
README.mdAS5715R
Inductive encoder based off the as5715r from AMS
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 47n | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10 |
| 4 | 6.8k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1.2n | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | tbd | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 200nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AS5715R | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
Similar boards
- 4 layers22.9 × 50.8 mm
Lg hvac esp32
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
20 parts2920BSD - 4 layers23.3 × 21.6 mm
- 4 layers21.5 × 42 mm
Indicator board
RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.
20 parts169Apache-2.0 - 4 layers71.8 × 56.5 mm
Arduino 387SX V2
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
20 parts114 - 4 layers58.3 × 54 mm
PSA Harness
lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!
20 parts95MIT - 4 layers20.5 × 10.5 mm
ADC B v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
20 parts94MIT - 4 layers34.5 × 42.2 mm
Questions
How big is the Inductive encoder PCB?
It measures 36 × 48.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Inductive encoder use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inductive encoder KiCad files?
From the Scouttman/AS5715R repository on GitHub, at the commit this page was made from: the board is inductive_encoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inductive encoder design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).