Skip to the content
2 layers50 × 25 mmLuminO, the printed circuit board in 3D

Softskills Winter Project Carl von Ossietzky Universität Oldenburg

Size
50 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
16
Pads
23
Tracks, vias
9, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Jan 2024
Updated
1 Dec 2025

Overview

LuminO is an open-source printed circuit board by Schneckenkoenig, from the Schneckenkoenig/LuminO repository on GitHub. It is a 2-layer board of 50 × 25 mm with 4 parts on 16 nets, routed with 9 tracks and 0 vias.

It is built around the WEMOS D1 MINI. It belongs with the ESP8266 boards of this library.

Main components

1

README

README.md

LuminO

Winter Projekt des Moduls Soft Skills und technische Kompetenz der Carl von Ossietzky Universität Oldenburg.

3D Druck Dateien

Es stehen 2 verschiedene Versionen des Gehäuses zur Verfügung. Eine 30mm und eine 50mm Version. Je nachdem welchen Außendurchmesser der LED Ring hat, muss die ensprechende Datei gedruckt werden. Die Version für den kleineren Ring ist generell schneller und günstiger druckbar.

Bauanleitung und Materialliste

Bauanleitung enthält eine bebilderte Schritt-für-Schritt Anleitung für den Zusammenbau des LuminOs.

Um das Projekt umzusetzen müssen einige Materialien besorgt werden. Das Projekt kann mit oder ohne Akku umgesetzt werden. Entsprechende Teile sind optional.

KomponenteMenge
D1 Mini Battery Shield1x (optional)
400mAh Lipo Akku1x (optional)
Wemos D1 Mini1x
Mini Momentan Druckknopf2x
12 LED Neopixel Ring1x
Lochrasterplatine (50x26 mm)1x

Die genaue Kapazität des Akkus ist zweitrangig. Er sollte nur nicht viel größer als 30x30 mm sein um in das Gehäuse zu passen.

Testprogramm

LuminO_TEST enthält einen Arduino Sketch der nach dem Fertigstellen des Projekts auf den D1 Mini geladen werden kann. Mit hilfe des Sketches können beide Buttons sowie der Led Ring auf richtige funktion geprüft werden.

Lizenz

Die in diesem Repository enthaltenen Workshopmaterialien werden unter License: CC BY-NC-SA 4.0 zur Verfügung gestellt.

Parts

4
QtyValueFootprintReferences
2Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalBUTTON_1, BUTTON_2
1Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalNEOPIXEL_RING
1WEMOS_D1_miniRF_Module:WEMOS_D1_mini_lightU1

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers32.1 × 40.8 mmPower Monitor Version 1, the printed circuit board in 3D

    Power Monitor Version 1

    alcar21/WemosEM

    Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

    8 parts122
  • 2 layers91 × 49 mmWled, the printed circuit board in 3D

    Wled

    wladwnt/wled

    Simple WLED Board (SW: https://github.com/Aircoookie/WLED)

    9 parts102
  • 2 layers97.5 × 59.3 mmControl Board, the printed circuit board in 3D

    Control Board

    kholia/Easy-Digital-Beacons-v1

    A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

    17 parts89
  • 2 layers64.6 × 36.9 mmNavien latest, the printed circuit board in 3D

    Navien latest

    htumanyan/navien

    Navien water heater wire protocol for communication with NaviLink and other attached devices

    30 parts65
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65
  • 2 layersTcsmonitor pcb, the printed circuit board in 3D

    Tcsmonitor pcb

    Syralist/tcs-monitor

    ein Bus-Monitor für TCS Klingelanlagen

    14 parts37MIT

Questions

How big is the LuminO PCB?

It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LuminO use?

4 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LuminO KiCad files?

From the Schneckenkoenig/LuminO repository on GitHub, at the commit this page was made from: the board is Custom-PCB (WIP)/LuminO.kicad_pcb and its schematic Custom-PCB (WIP)/LuminO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LuminO design in my own project?

Its repository states no licence, so its author keeps all rights: ask Schneckenkoenig before reusing the design.