2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers75 × 75 mm
Operame
sebastius/Operame_v12Hardware voor Operame v1
- Size
- 75 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 23
- Pads
- 37
- Tracks, vias
- 12, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Feb 2021
- Updated
- 1 Feb 2021
Overview
Operame is an open-source printed circuit board by sebastius, from the sebastius/Operame_v1 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 75 × 75 mm with 7 parts on 23 nets, routed with 12 tracks and 54 vias.
README
README.mdOperame
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H3, H4, H5 |
| 2 | Conn_01x12_Female | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical_SMD_Pin1Left | J1, J2 |
| 1 | MHZ19 | Sensor_MH-Z19:Sensor_MH-Z19 | J3 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the Operame PCB?
It measures 75 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Operame use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Operame KiCad files?
From the sebastius/Operame_v1 repository on GitHub, at the commit this page was made from: the board is operame.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Operame design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).