
LaserNetworkAdaptor
sebleedelisle/netstop
All files for my netstop system that combines network and interlock cables for laser control.

All files for my netstop system that combines network and interlock cables for laser control.
InterlockSplitterCombiner06 is an open-source printed circuit board by sebleedelisle, from the sebleedelisle/netstop repository on GitHub. It is a 2-layer board of 42 × 43.5 mm with 8 parts on 17 nets, routed with 288 tracks and 0 vias.
All files for my netstop system that combines network and interlock cables for laser control.
Currently only contains files to make a simple combiner / splitter.
Share-alike license : https://creativecommons.org/licenses/by-sa/4.0/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x08 | SebLee:Pads_1x08_P2.00mm_Vertical | J1, J2, J3 |
| 3 | RJ45_Shielded | SebLee:RJ45_Multiple3 | Combined1, Net1, Stop1 |
| 2 | LOGO | SebLee:SebLee7mm | G***, G*** |

sebleedelisle/netstop
All files for my netstop system that combines network and interlock cables for laser control.


joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 42 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sebleedelisle/netstop repository on GitHub, at the commit this page was made from: the board is PCBs/CombinerSplitterMedium06/InterlockSplitterCombiner06.kicad_pcb and its schematic LaserNetworkAdaptor/LaserNetworkAdaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sebleedelisle before reusing the design.