2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers61 × 78.7 mm
ESP RGB LED
Sean-AP/ESP-RGB-LED2MicroPython module for controlling an RGB LED strip
- Size
- 61 × 78.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 36
- Pads
- 55
- Tracks, vias
- 71, 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Jan 2022
- Updated
- 11 Sep 2023
Overview
ESP RGB LED is an open-source printed circuit board by Sean-AP, from the Sean-AP/ESP-RGB-LED repository on GitHub. It is a 2-layer board of 61 × 78.7 mm with 10 parts on 36 nets, routed with 71 tracks and 5 vias.
It is built around the IRLB8721PBF. Its parts include 3 transistors, 2 capacitors, 2 ICs, 2 connectors and 1 switch. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
1README
README.mdESP-RGB-LED
An embedded software project for controlling LED strips using an ESP8266 microcontroller
The project consists of three main folders: software, pcb, and housing
Software
A MicroPython module that can control an LED strip using the GPIO pins of an ESP8266 microcontroller
Input is received via wifi, written in a custom Python-like language which is parsed and executed onboard
PCB
A KiCAD project to design a PCB to power the ESP8266 and LED strip
Housing
A SOLIDWORKS project to design a 3D-printable housing for the PCB
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 1 | 0.1µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 0.33µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | NodeMCU v3 | ESP8266:NodeMCU-LoLinV3 | U1 |
| 1 | SW_SPST | Sean:RSPro_Toggle_SPST | SW1 |
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1 - 2 layers116.1 × 85.3 mm
Questions
How big is the ESP RGB LED PCB?
It measures 61 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP RGB LED use?
10 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP RGB LED KiCad files?
From the Sean-AP/ESP-RGB-LED repository on GitHub, at the commit this page was made from: the board is pcb/ESP_RGB_LED.kicad_pcb and its schematic pcb/ESP_RGB_LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP RGB LED design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sean-AP before reusing the design.