Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers92 × 56.7 mmSUNSOFT E301, the printed circuit board in 3D

    SUNSOFT E301

    Gumball2415/FME7-5A-5B-DevBoard

    An Open-Source HardWare (OSHW) FamiCom development/reproduction cartridge PCB designed for INES mapper 69.

    30 parts7
  • 2 layers95.9 × 90.2 mmPci104-template, the printed circuit board in 3D

    Pci104-template

    guorbit/pci104-template

    PCI-104 Template for KiCad EDA

    10 parts7
  • 2 layers35 × 100 mmWalkieTalkie, the printed circuit board in 3D

    WalkieTalkie

    GuzziFlipFlops/ESP32-Walkie-Talkie

    An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with

    66 parts7MIT
  • 4 layers30.7 × 51.7 mmSmallSpeedController, the printed circuit board in 3D

    SmallSpeedController

    h0lad/MiniSpeedController

    MiniSpeedController is a dual DC motor controller based on a WCH CH32V003F RISC-V Microcontroller and two TI DRV8837DSGR. It consumes two encoder inputs and is controllable using an USART via simple TLV commands.

    37 parts7CERN-OHL-S-2.0
  • 2 layers99.5 × 50.5 mm0089 Wardriver, the printed circuit board in 3D

    0089 Wardriver

    h4ck3rb0x/HackerBox0089

    Wispy Wardriving

    10 parts7
  • 4 layers102 × 82.6 mmLNA 1MHz, the printed circuit board in 3D

    LNA 1MHz

    H4w4k4/LNA_1MHz

    10Hz to 1MHz Low Noise Amplifier based on Linear Technology AN-159.

    139 parts7
  • 2 layers158.8 × 101.6 mmAimai, the printed circuit board in 3D

    Aimai

    hachiojipm/aimai

    aimai is an "FM transceiver" name tag based on ESP32

    37 parts7
  • 2 layers136.9 × 148.5 mmPixel Dust, the printed circuit board in 3D

    Pixel Dust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    404 parts7
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0
  • 2 layers100 × 87 mmBertha main, the printed circuit board in 3D

    Bertha main

    Hackuarium/bioreactor

    Please refer to the documentation for all useful information.

    159 parts7
  • 2 layers17.8 × 37.1 mmNanoSwinSIDc, the printed circuit board in 3D

    NanoSwinSIDc

    hackup/NanoSwinSIDc

    Simple AVR-based replacement for the MOS6581 and MOS8580 sound chips aka. the Commodore SID.

    15 parts7
  • 2 layers30.5 × 12.7 mmSyncFix64, the printed circuit board in 3D

    SyncFix64

    hackup/SyncFix64

    LM1881 based quick-fix for the C64 VSync

    16 parts7
  • 2 layers88 × 38.5 mmMonotron-002, the printed circuit board in 3D

    Monotron-002

    Hamlob/Monotron_CV_mod

    A modification for Korg's Monotron Delay, which makes it accept standard Eurorack CV voltages (Pitch, Gate and Cutoff CV). The mod also provides an option to power the monotron via micro-USB.

    52 parts7MIT
  • 2 layersVortex f1-d clone, the printed circuit board in 3D

    Vortex f1-d clone

    hanshuebner/cpc-floppy-controllers

    MOVED to code.netzhansa.com/hanshuebner/cpc-floppy-controllers. This GitHub mirror is archived.

    60 parts7
  • 2 layers40.9 × 70.9 mm120W BUCK, the printed circuit board in 3D

    120W BUCK

    harsh-hw-dev/120W-Synchronous-Buck-Converter-LM5116

    “Designed a 120W high-efficiency DC-DC synchronous buck converter using LM5116 (12V @ 10A). Includes schematic, component selection, feedback loop compensation, and performance optimization for stable output and high…

    38 parts7MIT
  • 2 layers320 × 320 mmWordclock, the printed circuit board in 3D

    Wordclock

    Hasenpups/PCB_Wordclock

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    233 parts7
  • 2 layers104.4 × 52.8 mmPN5180 Wemos PCB, the printed circuit board in 3D

    PN5180 Wemos PCB

    Hasenpups/PN5180_ESP_Reader

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    7 parts7
  • 2 layers67.1 × 56.6 mmHP6632B relay board, the printed circuit board in 3D

    HP6632B relay board

    hb020/HP6632B_relay_board

    #760 relay board option for HPAK 663xB and 66332A 2 quadrant PSUs. Making them 4 quadrant.

    23 parts7
  • 2 layers110 × 220 mmFin ltm, the printed circuit board in 3D

    Fin ltm

    HekiNav/finland-live-train-map

    Some of the LEDs are missing because they were removed after making the initial layout

    423 parts7MIT
  • 2 layers34.9 × 20 mmFT234X cross connection board, the printed circuit board in 3D

    FT234X cross connection board

    hijimasa/ros_hardware_in_the_loop_system

    Affordable Hardware-in-the-Loop Simulation (HILS) for ROS 2 robots, using inexpensive microcontrollers and off-the-shelf USB devices to test the full communication stack including physical interfaces.

    2 parts7MIT
  • 2 layers59.7 × 45.1 mmEGA2RGBC, the printed circuit board in 3D

    EGA2RGBC

    hkzlab/EGA-2-RGBS

    EPROM based EGA/CGA to analog RGBS converter

    27 parts7CC-BY-SA-4.0
  • 2 layers133.4 × 44.5 mmLocust, the printed circuit board in 3D

    Locust

    hlord2000/Locust

    A Cricut Joy hardware replacement

    42 parts7CERN-OHL-P-2.0
  • 2 layers30.1 × 65.1 mmRPi 0 RP2040, the printed circuit board in 3D

    RPi 0 RP2040

    Hugoyhu/Pico2040ZeroW

    Raspberry Pi Form Factor, RP2040, Wireless support with ESP-01

    46 parts7Apache-2.0