
Blackpants
o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

10Hz to 1MHz Low Noise Amplifier based on Linear Technology AN-159.
LNA 1MHz is an open-source printed circuit board by H4w4k4, from the H4w4k4/LNA_1MHz repository on GitHub. It is a 4-layer board of 102 × 82.6 mm with 139 parts on 66 nets, routed with 580 tracks and 174 vias.
It is built around the LT1818CS8#PBF, LT1365CS#PBF and LT6232CGN#PBF, with the THAT300S14-U among its other parts. Its parts include 60 capacitors, 53 resistors, 10 ICs and 3 connectors.
10Hz to 1MHz Low Noise Amplifier based on Linear Technology AN-159.
The design is based on Linear Technology AN-159 document. It describe how to build a +80dB 10Hz to 1MHz low noise amplifier in order to measure noise level in the 2nV/√Hz range.
Following changes have been done:
A 60dB attenuator is placed on the input of the LNA to measure the frequency response. An Analog Discovery 3 is used as a network analyser.
The complete production files are available. The PCB is a 4-layer 102 x 82.6mm and every components is hand solderable. The LNA is powered by 6x AA batteries, consumption is about 100mA. Use the Gerber "housing_Lid_Drill" for drilling the holes in the housing cover.
Total BOM cost is ~160USD + PCB + shipping.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 4k02 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R17, R22, R23, R27, R28, R30, R31, R35, R36, R38, R39, R43, R44, R46, R47 +2 |
| 14 | 100uF 6V3 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C16, C17, C19, C20, C21, C22, C24, C25, C28, C29, C32, C33, C34 |
| 12 | 1uF | Capacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C35, C36, C37, C38, C42, C43, C47, C48, C52, C53, C57, C58 |
| 10 | 68uF 20V | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N_Pad2.25x2.55mm_HandSolder | C1, C2, C3, C6, C7, C8, C9, C10, C11, C13 |
| 8 | 499 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25, R32, R33, R40, R41, R48, R49 |
| 6 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R5, R6, R7, R9, R10 |
| 6 | ~ | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | H1, H2, H3, H4, H5, H6 |
| 5 | 22pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C18, C39, C44, C49, C54 |
| 4 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R29, R37, R45, R53 |
| 4 | 249 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R26, R34, R42, R50 |
| 4 | 300pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C41, C46, C51, C56 |
| 4 | 330uF 6V3 | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N_Pad2.25x2.55mm_HandSolder | C40, C45, C50, C55 |
| 4 | LT1818CS8 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3, U5, U7, U9 |
| 4 | THAT300S14-U | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4, U6, U8, U10 |
| 3 | Conn_Coaxial | User_footprint:BNC_TycoElect_5227 | J1, J2, J3 |
| 2 | 180uF 25V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C59, C60 |
| 2 | 1k24 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R20 |
| 2 | 1k69 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R19 |
| 2 | 2k15 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R18 |
| 2 | 49R9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16, R21 |
| 2 | 4u7F 50V | Capacitor_THT:C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4, C5 |
| 2 | Battery_3x_AA | User_footprint:Battery_Holder_3x_AA_no_pin | M2, M3 |
| 1 | 1000pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C31 |
| 1 | 100pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C23 |
| 1 | 1200pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C27 |
| 1 | 120pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 1500pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C26 |
| 1 | 150pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | 1k | Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal | RV1 |
| 1 | 1k5 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 200 | Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal | RV2 |
| 1 | 220pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C30 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 499 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 511 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 5k76 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | Hammond_1590BBS | User_footprint:Hammond_1590BBS | M1 |
| 1 | LT1365CS | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | LT6232CGN | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U1 |
| 1 | Switch DPDT | User_footprint:Multicomp, 1MD1T1B5M1QE | M4 |
| 1 | Switch SPDT | User_footprint:Multicomp, 1MS1T1B5M1QE | M5 |

o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.




HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .


Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

It measures 102 × 82.6 mm and has 4 copper layers, 1.6 mm thick.
139 parts, built around the LT1818CS8#PBF, LT1365CS#PBF, LT6232CGN#PBF and THAT300S14-U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the H4w4k4/LNA_1MHz repository on GitHub, at the commit this page was made from: the board is KiCad/LNA_1MHz.kicad_pcb and its schematic KiCad/Input_stage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask H4w4k4 before reusing the design.