
Sensor Board
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
PWNSAT is an open-source printed circuit board by Pwnsat, from the Pwnsat/PWNCUBE repository on GitHub. It is a 4-layer board of 83 × 83 mm with 139 parts on 158 nets, routed with 1,242 tracks and 266 vias.
It is built around the MT3608, SL2.1A and W25N02KVZEIR, with the EA3059QDR, FSUSB30MUX and SS34 among its other parts. Its parts include 54 capacitors, 29 resistors, 7 ICs, 5 connectors and 5 inductors.
A hardware-based CubeSat platform for aerospace cybersecurity research and training, developed by PWNSAT in partnership with ElectronicCats. PWNCUBE is a satellite design and vulnerability set onto real dual-core flight-computer hardware (Rockchip RV1106 — Cortex-A7 Linux + RISC-V RT-Thread), demonstrating that the same class of satellite command-and-control vulnerabilities reproduces across genuinely different hardware, not just one reference board.
Full documentation, architecture diagrams, and step-by-step guides live in the Wiki.
| Folder | Contents |
|---|---|
Firmware/ | The complete RV1106 SDK source: dual-core boot (Cortex-A7 Linux + RISC-V RT-Thread), CCSDS Space Packet Protocol stack, radio/sensor/GPS drivers, build scripts. Clone-and-build (see Getting Started). |
Hardware/ | KiCad schematics and PCB design files for the three physical boards (main/flight-computer, sensor, battery). |
Case/ | 3D-printable enclosure (STL + slicer project files). |
The 8 hardware-validated attack scripts (00–07, USB and real RF) live in a
companion Attacks/ repository, published separately.
Same protocol (CCSDS Space Packet Protocol), same command APIDs, same vulnerability classes as FlatSat — reproduced on real dual-core flight hardware instead of a single-MCU reference board:
See the Attack Vectors wiki page for the full walkthrough of all 8 attacks, with real hardware output for each.
git clone <this-repo-url> PWNCUBE-FIRMWARE
cd PWNCUBE-FIRMWARE/Firmware
# extract toolchain.tar.gz + rkbin.tar.gz from the v6 Release first — see below
./build.sh deps # install host build dependencies (native Linux x86-64)
./build.sh # produces output/images/update.imgOn macOS, Windows, or if you'd rather not install packages on the host directly, build inside Docker instead — see Getting Started for the full walkthrough (both paths), including flashing, which always needs a real Linux x86-64 host or VM with USB passthrough regardless of how you built.
This repository intentionally excludes two things present in the original SDK archive, both available as assets on the v6 Release:
toolchain/ (ARM + RISC-V cross-compilers, ~2.6GB) — third-party, freely redistributable, just too large for a source repo.src/rkbin/ (Rockchip's proprietary boot-stage binaries) — third-party, provided by ElectronicCats.Everything else — kernel, U-Boot, the RT-Thread MCU firmware, all PWNSAT-authored application code — is included as source.
This project was created for educational purposes, to teach and learn aerospace cybersecurity. Neither PWNSAT nor Electronic Cats are responsible for how the knowledge, code, or tools hosted in this repository are used. Use only against hardware, firmware, or signal sources you own or are explicitly authorized to test.
Firmware source: see Firmware/README.md for the per-component breakdown (this SDK integrates code under several different open-source licenses). Attack scripts and this repository's own documentation: MIT unless noted otherwise.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C6, C7, C14, C15, C18, C24, C26, C30, C35, C36, C37 |
| 11 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C8, C11, C16, C23, C25, C28, C29, C55, C56 |
| 8 | 100K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R17, R18, R19, R21, R23, R24, R25 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C9, C10, C12, C13, C17 |
| 6 | 22uF | Capacitor_SMD:C_0402_1005Metric | C32, C34, C40, C42, C50, C51 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R7, R9, R12, R13 |
| 4 | 1.5uH | Inductor_SMD:L_1008_2520Metric | L1, L2, L3, L4 |
| 4 | 18pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19, C20, C21, C22 |
| 4 | 220pf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C31, C33, C39, C41 |
| 4 | 47uF | Capacitor_SMD:C_0603_1608Metric | C38, C43, C44, C45 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R4, R11 |
| 3 | 200K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R20, R22 |
| 3 | SS34 | Diode_SMD:D_SMA | D5, D6, D7 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric | C52, C57 |
| 2 | 120R@100M | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 2A | Fuse:Fuse_0603_1608Metric | F2, F3 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R26, R27 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C53, C54 |
| 2 | LOGO | Aesthetics:electronic_cats_logo_8x6 | G***, G*** |
| 2 | SW_Push | PWNCube:TS1088R02026 | SW1, SW2 |
| 2 | USB_A | PWNCube:USB_A_Connfly_DS1095 | J4, J5 |
| 1 | 110K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16 |
| 1 | 110K | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 15K | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C27 |
| 1 | 220uF | Capacitor_SMD:C_1206_3216Metric | C46 |
| 1 | 240R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 24MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 4.7uH | PWNCube:LQH5BPN | L5 |
| 1 | 510K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | AP2114H-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | Crystal_GND2 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | EA3059 | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | FSUSB30MUX | PWNCube:IC_FSUSB42UMX | U5 |
| 1 | G*** | kibuzzard-698516AC | kibuzzard-698516AC |
| 1 | G*** | kibuzzard-69861606 | kibuzzard-69861606 |
| 1 | G*** | kibuzzard-69B883B0 | kibuzzard-69B883B0 |
| 1 | G*** | kibuzzard-6989FAEE | kibuzzard-6989FAEE |
| 1 | G*** | kibuzzard-698517CD | kibuzzard-698517CD |
| 1 | G*** | kibuzzard-69B43A9C | kibuzzard-69B43A9C |
| 1 | G*** | kibuzzard-698516F5 | kibuzzard-698516F5 |
| 1 | G*** | kibuzzard-698517BF | kibuzzard-698517BF |
| 1 | G*** | kibuzzard-6989FAE0 | kibuzzard-6989FAE0 |
| 1 | G*** | kibuzzard-69851805 | kibuzzard-69851805 |
| 1 | G*** | kibuzzard-698517F0 | kibuzzard-698517F0 |
| 1 | G*** | kibuzzard-698615E5 | kibuzzard-698615E5 |
| 1 | G*** | kibuzzard-698517E4 | kibuzzard-698517E4 |
| 1 | G*** | kibuzzard-6985168F | kibuzzard-6985168F |
| 1 | G*** | kibuzzard-6986164F | kibuzzard-6986164F |
| 1 | G*** | kibuzzard-6985157B | kibuzzard-6985157B |
| 1 | G*** | kibuzzard-698516D4 | kibuzzard-698516D4 |
| 1 | G*** | kibuzzard-69851812 | kibuzzard-69851812 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | SL2.1A | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | Sensors | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | Source | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | USB Selector | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW4 |
| 1 | W25N02KVZEIR | Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U2 |
| 1 | ~ | PWNCube:RV1106G3 | U1 |
The 138 most common of 139 parts.

Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research







NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.

It measures 83 × 83 mm and has 4 copper layers, 1.6 mm thick.
139 parts, built around the MT3608, SL2.1A, W25N02KVZEIR and EA3059QDR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pwnsat/PWNCUBE repository on GitHub, at the commit this page was made from: the board is Hardware/PWNSAT/PWNSAT.kicad_pcb and its schematic Hardware/Battery_Board/Batt_Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pwnsat before reusing the design.