Skip to the content
2 layersVortex f1-d clone, the printed circuit board in 3D

MOVED to code.netzhansa.com/hanshuebner/cpc-floppy-controllers. This GitHub mirror is archived.

Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
133
Pads
418
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 6 (file 20211014)
Created
17 Jul 2022
Updated
3 Jun 2024

Overview

Vortex f1-d clone is an open-source printed circuit board by hanshuebner, from the hanshuebner/cpc-floppy-controllers repository on GitHub. It is a 2-layer board with 60 parts on 133 nets.

It is built around the 74LS384N, FDC9229T and 74LS136PC, with the 74LS139PC, 74LS14PC and 74LS253DC among its other parts. Its parts include 26 resistors, 17 capacitors, 14 ICs, 2 switches and 1 diode.

Main components

9

README

README.md

Amstrad/Schneider CPC floppy controllers

:warning: This is a work in progress: Don't fabricate PCBs from these files yet!

This project started as attempt to clone the Vortex F1-D floppy controller, which supports two 720k DSDD drives. The desire was to have a controller that can support four drives at the same time. The starting point was a capture of the original PCB into a schematic, which can be found in the original directory.

Vortex F1-D PCB

Multiple variants have been designed, but none of the designs in this repository have been tested, don't fabricate any PCBs at this point!

no-rom

rendered picture of the no-rom PCB variant (front) rendered picture of the no-rom PCB variant (back)

The no-rom variant contains a revised, but wasteful address decoder and no ROM socket. It works to some extent, but the first revisions contained multiple errors and required several patches. The version in this repository has the fixes applied, but was not yet fabricated and tested.

no-rom-cpld

rendered picture of the no-rom-cpld variant (front) rendered picture of the no-rom-cpld variant (back)

The no-rom-cpld variant replaces the TTL chips with a CPLD, reducing the part count significantly.

rom-cpld

rendered picture of the rom-cpld variant (front) rendered picture of the rom-cpld variant (back)

The rom-cpld variant adds a Flash ROM that can act as a universal ROM box in addition to holding an operating system ROM to drive the floppy disk controller.

Parts

60
QtyValueFootprintReferences
14100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C6, C7, C8, C9, C11, C12, C14, C15, C16, C17
11680Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R9, R12, R13, R16, R19, R20
810kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R14, R17, R18, R23, R24, R25, R26
71kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R7, R10, R11, R15, R21, R22
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
127128Package_DIP:DIP-28_W15.24mmIC4
14.7u 25VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC13
147pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
147u 16VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10
174LS01Package_DIP:DIP-14_W7.62mm_SocketIC11
174LS07Package_DIP:DIP-14_W7.62mm_SocketIC13
174LS08Package_DIP:DIP-14_W7.62mm_SocketIC6
174LS136Package_DIP:DIP-14_W7.62mm_SocketIC1
174LS139Package_DIP:DIP-16_W7.62mm_SocketIC14
174LS14Package_DIP:DIP-14_W7.62mm_SocketIC5
174LS25Package_DIP:DIP-14_W7.62mm_SocketIC7
174LS32Package_DIP:DIP-14_W7.62mm_SocketIC8
174LS38Package_DIP:DIP-14_W7.62mm_SocketIC12
174LS74Package_DIP:DIP-14_W7.62mm_SocketIC2
174LS85Package_DIP:DIP-16_W7.62mm_SocketIC3
1CPC BusConnector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_VerticalS1
1FD BusConnector_IDC:IDC-Header_2x17_P2.54mm_VerticalS2
1FDC_9229Package_DIP:DIP-20_W7.62mm_SocketIC9
1uPD765ACPackage_DIP:DIP-40_W15.24mm_SocketIC10

More from hanshuebner/cpc-floppy-controllers

2
  • 2 layers111.9 × 64.1 mmVortex f1-d no rom, the printed circuit board in 3D

    Vortex f1-d no rom

    hanshuebner/cpc-floppy-controllers

    MOVED to code.netzhansa.com/hanshuebner/cpc-floppy-controllers. This GitHub mirror is archived.

    49 parts7
  • 2 layers85.6 × 50 mmVortex f1-d no rom cpld, the printed circuit board in 3D

    Vortex f1-d no rom cpld

    hanshuebner/cpc-floppy-controllers

    MOVED to code.netzhansa.com/hanshuebner/cpc-floppy-controllers. This GitHub mirror is archived.

    18 parts7

Similar boards

  • 2 layers99.1 × 65.9 mmCPC DDI20, the printed circuit board in 3D

    CPC DDI20

    Bread80/CPCModular

    Modular Amstrad CPC Compatible Computer (WiP)

    40 parts5CERN-OHL-P-2.0
  • 2 layers93.4 × 80.2 mmCPC464-2MINIDDI, the printed circuit board in 3D

    CPC464-2MINIDDI

    Board-Folk/CPC464-2MINI

    Mini CPC464

    61 parts10
  • 2 layers364 × 203 mmCPU6S, the printed circuit board in 3D

    CPU6S

    Meisaka/CenMiniCom

    Centurion Minicomputer Schematics

    240 parts8
  • 2 layers200 × 321.3 mmBackplane, the printed circuit board in 3D

    Backplane

    tergav17/RDP-9

    Homebrew TTL ISA-compatible PDP-9 clone

    137 parts6
  • 2 layersRogelio Pineda part 7-AMLDC-2044B, the printed circuit board in 3D

    Rogelio Pineda part 7-AMLDC-2044B

    ForgottenMachines/Entrex

    The technologies documented here will include all like-kind systems manufactured by Nixdorf, Redifon, ROCC & Mera, all originally designed by Entrex Inc, Burlington, MA USA.

    332 parts1
  • 4 layers254 × 137.7 mmS100 ColorMagic-1.1-006, the printed circuit board in 3D

    S100 ColorMagic-1.1-006

    RichCini/LomasBoards

    Small repository of files/data related to Lomas Data Products S-100 boards.

    150 parts1
  • 2 layers162.6 × 97.3 mmMemory subsystem, the printed circuit board in 3D

    Memory subsystem

    TSJR/logic-analyzer

    TTL logic analyzer built from 74xx logic and LED dot matrix display

    73 parts

Questions

What parts does the Vortex f1-d clone use?

60 parts, built around the 74LS384N, FDC9229T, 74LS136PC and 74LS139PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vortex f1-d clone KiCad files?

From the hanshuebner/cpc-floppy-controllers repository on GitHub, at the commit this page was made from: the board is original/vortex-f1-d-clone.kicad_pcb and its schematic no-rom-cpld/vortex-f1-d-no-rom-cpld.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vortex f1-d clone design in my own project?

Its repository states no licence, so its author keeps all rights: ask hanshuebner before reusing the design.