
Speak to Me
wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

wntrblm/Speak_to_Me
A beautiful stereo headphone amplifier and a delightfully lo-fi speaker


xtech/hw-openmower-universal
This hardware version is in beta state. Expect for things to not work at the current state!

ytmytm/C128-keyboard
Allow a modern USB keyboard to be used with a Commodore 128 in place of the original keyboard.

zmcginty/OpenTMS
Open-Source Transcranial Magnetic Stimulator. High energy pulse circuitry, simple controllers, and coil design.

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

ahillbom/TougherPowerMonitor-HW
Triple-channel power monitor based on INA3221 and TPS1HB08A with some filtering for tougher conditions. Compatible with Arduino Nano and Feathers.




Bad-Dog-Designs/ESP32-S3-Synthesizer
Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine

benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.


bkw777/Model_T_RAM
8K RAM module for "Model T Computers" - TRS-80 Model 100, Kyotronic KC-85, NEC PC-8201, Olivetti M10



Breadstick-Innovations/Raspberry-Breadstick
A Breadstick development board based around the Raspberry Pi Foundation's RP2040 microcontroller.

briskspirit/Sisu_SSE-9
Experimental six-layer LTE replacement mainboard for the Nokia 3210, built around RP2354B and Telit LE910C1-WWX.

brunostjohn/CarveraPCBGuide
how to make PCBs with a carvera air & some thoughts + prayers

bwack/C64-cartridge-template-kicad5
A starting point for you C64 cartridge design adventures!

ccadic/HackZeGarage
ESP32-S2 and CC1101S 433Mhz usb stick to record and send car gates/garages data keys and open stuff

ChrisChrisLoLo/modkipz40
A pocket keyboard that uses mouse switches, now ergonomic :)


chriz2600/ADV7513
This is a small development board for the [Analog Devices ADV7513 HDMI Transmitter][ADV7513]. It's designed to be hand-soldered. I also wrote some code for initialisation (via I2C) in verilog.