

TougherPowerMeter FeatherWing
Triple-channel power monitor based on INA3221 and TPS1HB08A with some filtering for tougher conditions. Compatible with Arduino Nano and Feathers.
- Size
- 130 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 71
- Pads
- 297
- Tracks, vias
- 622, 126
- Pours
- 33
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Aug 2020
- Updated
- 13 May 2021
Overview
TougherPowerMeter FeatherWing is an open-source printed circuit board by ahillbom, from the ahillbom/TougherPowerMonitor-HW repository on GitHub, published under the MIT licence. It is a 2-layer board of 130 × 53 mm with 85 parts on 71 nets, routed with 622 tracks and 126 vias.
It is built around the AP63205WU, SMBJ16D-M3 and 0ZCG0075BF2B. Its parts include 26 resistors, 23 capacitors, 11 connectors, 8 diodes and 4 ICs. It belongs with the sensors and measurement and microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3AP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersSMBJ16D-M3
DO-214AA(SMBJ)-55℃~+150℃ 16V 19.4V 23.4A@10/1000us 25.6V 500nA 600W@10/1000us TVS Unidirectional DO-214AA(SMBJ) ESD and Surge Protection (TVS/ESD) ROHSVishay IntertechnologyESD And Surge Protection (TVS/ESD)0ZCG0075BF2B
1812-40℃~+85℃ 1.5A 110mΩ 1W 200ms 33V 400mΩ 40A 750mA 1812 Resettable Fuses ROHSBel FuseResettable Fuses
README
README.mdWhat is this?

Power monitor with three channels, each capable of continuous 10A and 24V. It is compatible with both Arduino and Feather, and is based on a popular INA3221. The power monitor is more robust compared to other modules based on this IC. Each channel has proper RC filtering with TVS diodes to prevent INA3221 from being destroyed by transients, and to eliminate glitches. Pluggable screw terminals are rated for 15A, and can handle 12 to 30 AWG wires.
The third channel has a TPS1HB08A power switch, to be able to disconnect the load. The board can also provide power to the Feather or Arduino from the first channel via a built-in buck converter.
Block diagram

Schematics




Assembled board

Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R11, R12, R13, R14, R15, R25, R26 |
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 9 | 796639-2 | Connector_BD:TE_796639-2 | J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 7 | SMBJ16D | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6, D7 |
| 6 | 10 | Resistor_SMD:R_0603_1608Metric | R16, R18, R19, R21, R22, R24 |
| 6 | Fiducial | Fiducial:Fiducial_1.5mm_Mask4.5mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10m | Resistor_SMD:R_2512_6332Metric | R17, R20, R23 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C5, C6, C23 |
| 2 | 100n | Resistor_SMD:R_0603_1608Metric | C4, C19 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C3, C22 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 220n | Capacitor_SMD:C_0603_1608Metric | C7, C20 |
| 2 | 22u | Capacitor_SMD:C_1210_3225Metric | C2, C21 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C18 |
| 1 | 0ZCG0075BF2B | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 4.7u | Inductor_SMD_BD:L_Bourns_SRR1210A | L1 |
| 1 | AP63205 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Arduino_Nano_v3.x | Module_BD:Arduino_Nano_NoSilk | A1 |
| 1 | D_Schottky | Diode_SMD:D_SMB | D8 |
| 1 | FeatherWing | Module_BD:FeatherWing_NoMH | U3 |
| 1 | INA3221 | Package_DFN_QFN:Texas_RGV_S-PVQFN-N16_EP2.1x2.1mm | U4 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | TPS1HB08A-Q1 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm | U2 |
Similar boards
- 2 layers105.7 × 56 mm

- 2 layers28.3 × 14.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 6 layers84 × 98 mm

FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers65 × 70 mm

Openradfan
andrekuehne/openradfan
An ESPHome-driven controller for radiator fans to improve heat output
49 parts29MIT - 4 layers96 × 172 mm

- 4 layers355 × 160 mm

LiBCM
doppelhub/Honda_Insight_LiBCM
Replacement BCM for G1 Honda Insight Lithium Conversion
717 parts25CC-BY-SA-4.0 - 2 layers82.5 × 140 mm

QCamPCR
GaudiLabs/qPocketPCR
Quantitative PCR machine detecting fluorescence using a camera
113 parts22GPL-3.0 - 2 layers28.8 × 14.3 mm

Tap Photosensor PCB
Qballjos/Voron-2.4-Otopus-pro-SB2209-U2C-CAN
Voron 2.4 R2 with ,Stealthburner, Voron Tap, Bambu lab Hotend. Octopus pro with TMC2209 UART, EBB SB2209 v1.0 and U2C v2.1 running klipper
12 parts21
Questions
How big is the TougherPowerMeter FeatherWing PCB?
It measures 130 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TougherPowerMeter FeatherWing use?
85 parts, built around the AP63205WU, SMBJ16D-M3 and 0ZCG0075BF2B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TougherPowerMeter FeatherWing KiCad files?
From the ahillbom/TougherPowerMonitor-HW repository on GitHub, at the commit this page was made from: the board is TougherPowerMeter-FeatherWing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TougherPowerMeter FeatherWing design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).