Skip to the content
2 layers49.6 × 109.8 mmAirOwl v1, the printed circuit board in 3D

Open Source DIY Air Quality Monitor

Size
49.6 × 109.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
33
Pads
58
Tracks, vias
78, 12
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 Sep 2024
Updated
2 Sep 2026

Overview

AirOwl v1 is an open-source printed circuit board by airowl-iot, from the airowl-iot/airowl repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.6 × 109.8 mm with 16 parts on 33 nets, routed with 78 tracks and 12 vias.

It is built around the SS34. Its parts include 4 resistors, 3 connectors, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.

Main components

1

README

README.md

AIROWL

The Airowl is an indoor Air Quality Measurement device comprising of the ESP32 S3 powered M5stack Core S3 SE, which integrates the aforementioned controller chip, with a 320 x 240 LCD screen supporting capacitive touch, along with a speaker and the AXP2101 power management chip.

Airowl is Now Matter-Compatible

Airowl now supports Matter, the new smart home standard, enabling seamless integration with Apple HomeKit, Google Home, and other Matter-supported ecosystems. Check the Firmware for details on Matter integration.

This repository serves as the source of the complete Airowl, consisting of its firmware source files, 3D files, and PCB design files.

This file provides instructions to assemble the individual components of the Airowl, along with its Bill of Materials (BOM).

The BOM for the Airowl is as Follows:

SR.ITEM DESCRIPTIONNOTESQtyProduct Links
1M5 STACKSCREEN1Link
2FRONT FACIAUV FRONT 1.3 MM + REAR BLACK 5 MM1Front
33D PRINT BACK CASEBLACK MATTLE 3D PRINTED CASE1Back
4FASTENERSM3 X 8 mm PHILIPS HEAD (SS)2
5FASTENERSM3 X 20 mm CSK Blunted (SS)2
6FASTENERSM3 X 25 mm CSK Blunted (SS)2
7Screw Driver (+)Mini Screw Driver1
8TYPE C - TYPE C CABLEPORTRONICS TYPE C CABLE1

More details of the individual components can be found as followed:

PCB files

Firmware

Squareline studio project files

Design Files

Assembling the Airowl

The following is a cross sectional view of the Airowl dpicting its individual components and the way that they must be connected:

Design Files

From left to right, we can observe the parts as follows:

  1. Screws
  2. 3D printed Black Case
  3. Printed circuit Board
  4. M5 stack Core S3 SE
  5. Sensirion SEN 54 sensor
  6. Front Cover

Ensure that the screws are connected correctly as depicted in the above picture, incase the screws are connected incorrectly, the longer screws might damage the physical cover of the Airowl.

On assembling the Airowl, it appears like depicted below:

alt text

On following the instructions in Firmware, the Airowl can be programmed succesfully.

Check this repository releases for newer firmware updates.

Made by the Community, with -❤️-:

Licensing

Airowl is available under MIT License

Parts

16
QtyValueFootprintReferences
410KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4
2LOGOOizom_Logo:made_with_loveG***, G***
2LOGOOizom_Logo:Oizom_Horizontal_20mmG***, G***
1Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ3
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1CoreSEM5Stack:CoreS3U1
1LOGOOizom_Logo:AirOwl_Solid50G***
1LOGOOizom_Logo:AirOwl_Solid70G***
1SS34Diode_SMD:D_SMAD2
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1USB_C_Receptacle_PowerOnly_6PUSB_Connectors:MOLEX_2171780001J4

Similar boards

  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 6 layers235.1 × 213.7 mmQuiver PT3 Main PCB rounded, the printed circuit board in 3D

    Quiver PT3 Main PCB rounded

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    164 parts617CERN-OHL-S-2.0
  • 2 layers103.3 × 63.7 mmUsb power hub, the printed circuit board in 3D

    Usb power hub

    dilshan/usb2-power-hub

    4-Port High Power USB 2.0 Hub

    100 parts189MIT
  • 6 layers178 × 211 mmCBC PCB, the printed circuit board in 3D

    CBC PCB

    Arrow-air/project-caribou

    Project Caribou documentation, designs, and project artifacts.

    319 parts177CERN-OHL-S-2.0
  • 6 layers84 × 98 mmFujiNet-5200-Rev0, the printed circuit board in 3D

    FujiNet-5200-Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    145 parts142
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 6 layers64.8 × 69.9 mmEzDV, the printed circuit board in 3D

    EzDV

    tmiw/ezDV

    A FreeDV device based on the ESP32.

    130 parts114

Questions

How big is the AirOwl v1 PCB?

It measures 49.6 × 109.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AirOwl v1 use?

16 parts, built around the SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AirOwl v1 KiCad files?

From the airowl-iot/airowl repository on GitHub, at the commit this page was made from: the board is Mountingboard/AirOwl_v1/AirOwl_v1.kicad_pcb and its schematic Mountingboard/AirOwl_v1/AirOwl_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AirOwl v1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).