
DD Compute 1
Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs
DD Compute 2 is an open-source printed circuit board by Acmex2564, from the Acmex2564/Z31-DigiDash repository on GitHub. It is a 4-layer board of 200 × 65 mm with 183 parts on 336 nets, routed with 969 tracks and 56 vias.
It is built around the SN74LV1T34DCK, SRV05-4 and VO0631T, with the 25LC020AT-E/SN, BAV70 and 1N4148WS among its other parts. Its parts include 76 capacitors, 26 ICs, 15 connectors, 14 resistors and 8 diodes. It belongs with the STM32 boards of this library.
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs
Z31 digital clusters are one of, if not the best examples of this pure 1980s trend. Comprehensive instrumentation, large graphics, and gorgeous VFD illumination were a somewhat expensive option on the 300zx, as well as on Maxima, 240SX, Corvette, Celica/Supra, and a variety of other cars. As the cars languished in the transition period between "late model" and "classic", though, the digital package for the 300zx was not well liked.
It had 3 major issues:
Now, as Z31s sit at the bottom of the depreciation curve, more people see them as '80s Grand Touring icons and not just as transporation or "sports cars", and a functioning digital dash can be a highlight instead of a detractor.
I have the personal goal of solving at least two of the 3 main problems with these units, by reverse engineering them in the existing state, and designing a drop-on processor board and replacement power supply module.
See files "Physical Description.md", "Logical Description.md", and "Electrical Description.md" for my observations so far. Also present are images showing how to power up the dash out of the car, and a picture of a printout that I used to map out the input pins.
Note: I am a hobbiest. I am not a EE, CS, Developer, or any related field. Generally, I do my best to read and cargo-cult my way into a working solution. Progress will be slow. The modular design has made it easy to get quick progress and seize control of the actual display, so input, input protection, and power supply will be the main challenges.
Note: None of the boards as-presented are in a state fit to be used without major effort. Big chunks of the Compute-Early-1 design were never tested before I moved on to Compute-Early-2 after component obselecence, etc. and the code to do more than flash the display on the bench was never developed.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C10, C11, C12, C14, C15, C16, C20, C21, C28, C31, C38, C39 +42 |
| 24 | 4.7k | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2, RN10, RN11, RN12, RN13, RN14, RN15, RN16, RN17, RN18, RN19, RN20, RN21, RN22, RN23 +8 |
| 7 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U17, U24, U25, U26, U27, U28, U29 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric | C30, C32, C34, C36, C37 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric | C13, C17, C19, C25 |
| 4 | 47uF | Capacitor_SMD:CP_Elec_5x5.3 | C26, C27, C29, C35 |
| 4 | 74HC165D-Q100,118 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4, U21, U22, U23 |
| 4 | 74HCT244D,653 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U2, U3, U6, U7 |
| 4 | BAV70 | Package_TO_SOT_SMD:SOT-23 | D9, D10, D11, D13 |
| 4 | Hole | MountingHole:MountingHole_3.5mm | H3, H4, H5, H6 |
| 4 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | Rt1, Rt2, Rt3, Rt4 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R11, R12, R13 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric | C33, C40, C41 |
| 3 | 1N4148WS | Diode_SMD:D_SOD-323 | D1, D2, D3 |
| 3 | Conn_01x03 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5, J6, J7 |
| 3 | Polyfuse_Small | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1, F2, F3 |
| 3 | SN74LV1T34DCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5, U9, U10 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R8 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C44, C45 |
| 2 | 35.7k 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R10 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 75k 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9 |
| 2 | LMV324AIDR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U30, U31 |
| 2 | Peg | Personal:Z31_DD_Mountpeg | H1, H2 |
| 2 | VO0631T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U13, U16 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D2.0mm | 3.3V1 |
| 1 | +5V | TestPoint:TestPoint_Pad_D2.0mm | 5V_Logic1 |
| 1 | +5VA | TestPoint:TestPoint_Pad_D2.0mm | 5V_Analog1 |
| 1 | +5VD | TestPoint:TestPoint_Pad_D2.0mm | 5V_Disp1 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 25LC020AT-E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U18 |
| 1 | 47 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R14 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 74HCT00D,653 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | CAR INTERFACE - 0349610341 | Molex_34826:349610340 | J14 |
| 1 | CAR INTERFACE - 0349610341 - SIG | Molex_34826:349610340 | J9 |
| 1 | DISP. BOARD CONN 1 (1-20) | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | DISP. BOARD CONN 2 (21-40) | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | DISP_BOARD_CONN_3 | Connector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J10 |
| 1 | GND | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | GND1 |
| 1 | ISOLATED INPUTS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | ISOLATED OUPTUTS & POWER | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J11 |
| 1 | NTCG204AH473JT1 | Resistor_SMD:R_0805_2012Metric | TH1 |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | ODOMETER MODULE | Connector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J13 |
| 1 | POWER SUPPLY - 0349580340 | Molex_34826:34958 | J8 |
| 1 | STM32F103V8Tx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U20 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J15 |
| 1 | TJR1443 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U19 |
| 1 | TRIP BOARD CONN 1 (1-10) | Connector_JST:JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J3 |
| 1 | TRIP BOARD CONN 2 (11-22) | Connector_JST:JST_XH_B12B-XH-A_1x12_P2.50mm_Vertical | J4 |

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs

Acmex2564/Z31-DigiDash
Reverse Engineering of the 300zx (Z31) Digital Cluster & Design of replacement PCBs



rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU


mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

ebastler/E80-1800
QMK compatible PCB replacement for Cherry G80-1800


ScatteredDrifter/Buran-Ortho
A 39-key orthogonal keyboard with support for two knobs, based on a rp2040
It measures 200 × 65 mm and has 4 copper layers, 1.6 mm thick.
183 parts, built around the SN74LV1T34DCK, SRV05-4, VO0631T and 25LC020AT-E/SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Acmex2564/Z31-DigiDash repository on GitHub, at the commit this page was made from: the board is Design/DD_Compute_2/DD_Compute_2.kicad_pcb and its schematic Design/DD_Compute_2/DD_Compute_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Acmex2564 before reusing the design.