Skip to the content

Open-source KiCad boards

65 match “SlimeVR”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers49 × 25 mmSlimeVR Tracker, the printed circuit board in 3D

    SlimeVR Tracker

    CoreanXka/SlimeVR-Tracker

    基于上述原因,诞生了这个项目,解决了上面的问题,并具有以下特点: - 超小尺寸,超高集成度,仅比开发板长1mm。 - 整合接口,仅用一个Type-C接口实现充电与程序下载。 - 集成最最最重要的电池保护芯片。 - 预留电池引脚接口和开关引脚接口,锂电池不再直连3.3V引脚,而是会先经过降压芯片降压后输出。 - 智能切换供电,在有外部USB供电的情况下会切断锂电池供电并进行充电,断开供电后自动使用锂电池供电。 -…

    40 parts6GPL-3.0
  • 2 layers30 × 30 mmSlimeVR Tracker, the printed circuit board in 3D

    SlimeVR Tracker

    xuan25/SlimeVR-Tracker-HW

    Hardware design of my SlimeVR Tracker

    61 parts5MIT
  • 2 layers40 × 43 mmSlimeVR pcb, the printed circuit board in 3D

    SlimeVR pcb

    H3wastooshort/slimeinator

    71 parts2AGPL-3.0
  • 2 layers30 × 60 mmSlimeVR, the printed circuit board in 3D

    SlimeVR

    R-Josef/SlimeVR-Hardware

    This is a SlimeVR hardware project, including a PCB file and case models.

    10 parts2
  • 2 layers55.8 × 44.5 mmSlimeVR board Full, the printed circuit board in 3D

    SlimeVR board Full

    Skaut0071/SlimeVR_Tracker

    Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.

    47 parts1
  • 2 layers50.5 × 43.9 mmKicad slimevr, the printed circuit board in 3D

    Kicad slimevr

    AdamK2003/yasvrb-pcb

    Yet Another SlimeVR Build - PCBs

    14 parts
  • 2 layers61 × 50 mmSlimeVR board, the printed circuit board in 3D

    SlimeVR board

    Skaut0071/SlimeVR_Tracker

    Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.

    43 parts1
  • 2 layers61 × 50 mmSlimeVR board 2-5W, the printed circuit board in 3D

    SlimeVR board 2-5W

    Skaut0071/SlimeVR_Tracker

    Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.

    46 parts1
  • 2 layers62.9 × 54 mmSlimeVRMotherBoardV2, the printed circuit board in 3D

    SlimeVRMotherBoardV2

    173site/SlimeVR-PCBs

    Includes CAD files for the PCBs using JST six pin connectors for the extensions

    14 partsMIT
  • 2 layers70 × 36 mmSlimevrpcb, the printed circuit board in 3D

    Slimevrpcb

    caterpy/-deprecated-meow-slimevr

    simple pcbs for slime vr

    9 parts
  • 2 layers54 × 54 mmSlimeVRMotherBoard, the printed circuit board in 3D

    SlimeVRMotherBoard

    kitspace-test-repos/kicad6-file-collection

    14 partsMIT
  • 2 layers16.8 × 29 mmSlimenrfdock, the printed circuit board in 3D

    Slimenrfdock

    SlimeVR/SlimeVR-Tracker-nRF-PCB

    SlimeNRF PCBs and 3D model files for cases and dock

    82 parts32
  • 2 layers41.4 × 34 mmFerrous slime, the printed circuit board in 3D

    Ferrous slime

    TheButlah/slimevr_pcb

    A collection of PCBs designed for SlimeVR full-body trackers

    60 parts19
  • 2 layers16.5 × 20.3 mmBMI270-Breakout, the printed circuit board in 3D

    BMI270-Breakout

    HackableElectronics/BMI270-Breakout

    BMI270 IMU breakout board using STEMMA QT / Qwiic

    16 parts1LGPL-2.1
  • 2 layers16.5 × 20.3 mmLsm6dr3trc breakout, the printed circuit board in 3D

    Lsm6dr3trc breakout

    HackableElectronics/LSM6DS3TR-C-Breakout

    LSM6DS3TR-C IMU breakout board using Qwiic

    16 parts1GPL-3.0
  • 2 layers24.3 × 24.8 mmLimeTK SomeSlime MCU, the printed circuit board in 3D

    LimeTK SomeSlime MCU

    heronbone/LimeTK_SomeSlime-MCU

    A hardware design(PCB only) for SlimeVR Tracker

    18 parts1CERN-OHL-W-2.0
  • 2 layers28.5 × 43 mmMarathon-1 PCB, the printed circuit board in 3D

    Marathon-1 PCB

    jorden074/Jorden-SlimeVR

    Open-source VR tracker designs and documentation. :3

    17 parts1CERN-OHL-S-2.0
  • 2 layers60 × 26.2 mmSlimePCB, the printed circuit board in 3D

    SlimePCB

    ManicQuinn/SlimeVR-Candy

    Custom SlimeVR Trackers I am working on, Non-PCB Case design, optimized for being compact while using breakout boards and also have cable routing in mind so it won't affect the antenna signal.

    9 parts1GPL-3.0
  • 2 layers60 × 48 mmHub, the printed circuit board in 3D

    Hub

    cUDGk/vrc-fbt-hardware

    VRChat向けフルボディトラッキング基板 — ハブ+デイジーチェーン端末・数と位置を自由に変更可能・KiCad/OpenSCAD一式

    57 parts
  • 2 layers48.3 × 57.2 mmBMI160, the printed circuit board in 3D

    BMI160

    infopcgood/SlimeVR_Tracker_PCB

    SlimeVR tracker PCB for personal use.

    10 parts
  • 2 layers38 × 52 mmHanpen main, the printed circuit board in 3D

    Hanpen main

    keyakko/hanpen

    Custom PCB for SlimeVR

    13 partsMIT
  • 2 layers100 × 50 mmPicoRF Blk2B MTCS Mk2, the printed circuit board in 3D

    PicoRF Blk2B MTCS Mk2

    madkoding/slimestuff

    SlimeVR resources hub. Scripts, utilities, and complement documentation for the SlimeVR ecosystem.

    90 parts