
PCB BOARD DESIGN FOR IOT ENABLED WEARABLE HEALTH MONITOR
NITHYAR2005/PCB-BOARD-DESIGN-FOR-IOT-ENABLED-WEARABLE-HEALTH-MONITOR

SlimeVR pcb is an open-source printed circuit board by H3wastooshort, from the H3wastooshort/slimeinator repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 40 × 43 mm with 71 parts on 69 nets, routed with 414 tracks and 163 vias.
It is built around the ESP32-S2-WROVER-I(4M), QMC6309 and AP2112K-3.3, with the DW01A, ICM-45686 and TP4057 among its other parts. Its parts include 21 resistors, 8 capacitors, 7 ICs, 5 diodes and 2 switches. It belongs with the ESP32 boards of this library.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R6, R7, R10, R11, R20, R21 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5, C7, C8 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R16, R17 |
| 3 | 300k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R18, R19 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | white | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4 |
| 2 | yellow | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3 |
| 1 | +5V | TestPoint:TestPoint_Pad_4.0x4.0mm | TP2 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 1N5819HW | Diode_SMD:D_SOD-123 | D5 |
| 1 | 1k68 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 3N00032G33YC | easyeda2kicad:OSC-SMD_4P-L3.2-W2.5-CJ13-320001210A20 | Y1 |
| 1 | 804040 Li-Po | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | 8205A | Package_TO_SOT_SMD:SOT-23-6 | Q1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | BOOT | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | D+ | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | D- | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | ESP32-S2-WROVER | RF_Module:ESP32-S2-WROVER | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1 |
| 1 | HRO_TYPE-C-31-M-12 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ICM-45686 | easyeda2kicad:LGA-14_L3.0-W2.5-P0.50-TL | U3 |
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | LOGO1 |
| 1 | PCBcat | H3_Other:PCBcat | CAT** |
| 1 | QMC6309 | easyeda2kicad:X1-WLB0808-4_L0.8-W0.8-P0.40-TL | U5 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SK12D07VG4 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW2 |
| 1 | TP4057 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | TPS25200DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | VBUS_FLT | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | https://github.com/H3wastooshort/slimeinator | LOGO | G*** |
| 1 | iCLK | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | iSCL | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | iSDA | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | µINT | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | µSCL | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | µSDA | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
The 68 most common of 71 parts.

NITHYAR2005/PCB-BOARD-DESIGN-FOR-IOT-ENABLED-WEARABLE-HEALTH-MONITOR



madkoding/slimestuff
SlimeVR resources hub. Scripts, utilities, and complement documentation for the SlimeVR ecosystem.


caterpy/Kicad-CheeseCake-SlimeTrackers-edit-
newslimes-cheesecake edit

Student-Satellite-IITB/Communication-Subsystem
Communication Subsystem for IITBSSP CubeSat Mission
It measures 40 × 43 mm and has 2 copper layers, 1.6 mm thick.
71 parts, built around the ESP32-S2-WROVER-I(4M), QMC6309, AP2112K-3.3 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the H3wastooshort/slimeinator repository on GitHub, at the commit this page was made from: the board is hardware/slimeVR_pcb/slimeVR_pcb.kicad_pcb and its schematic hardware/slimeVR_pcb/slimeVR_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).