Skip to the content

QMC6309

QSTExtended

-40℃~+85℃ 16bit 2.5V~3.6V 6uA、10uA I2C ±3.2mT ±3.2mT WLCSP-4(0.8x0.8) 3D Magnetic Sensors ROHS

Part id
qst/QMC6309
Category
3D Magnetic Sensors
Package
WLCSP-4(0.8x0.8)
Pins
4
In stock
4,710 at JLCPCB (C5439871)
Used on
16 open-source boards

Overview

The QMC6309 is a 3D Magnetic Sensor made by QST in a WLCSP-4(0.8x0.8) package with 4 pins. -40℃~+85℃ 16bit 2.5V~3.6V 6uA、10uA I2C ±3.2mT ±3.2mT WLCSP-4(0.8x0.8) 3D Magnetic Sensors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AK09918C-L, from EasyEDA) and its footprint (EasyEDA_Cloud:X1-WLB0808-4_L0.8-W0.8-P0.40-TL, from EasyEDA), ready for a KiCad board. 4,710 are in stock at JLCPCB (part C5439871). 16 open-source boards in 13 repositories on GitHub use it.

Symbol

A2SCLB2SDAA1VSSB1VDD
EasyEDA_Cloud:AK09918C-LFrom EasyEDA

Footprint

EasyEDA_Cloud:X1-WLB0808-4_L0.8-W0.8-P0.40-TLFrom EasyEDA

From the datasheet

9
Supply, least
2.5 V · VDD, recommended operating min · p. 5
Supply, most
3.6 V · VDD, recommended operating max · p. 5
Supply, absolute maximum
5 V · VDD, absolute max · p. 6
Works from
-40 °C · Operating temperature min · p. 5
Works up to
85 °C · Operating temperature max · p. 5
Takes working
600 µA · VDD, normal mode typical, ODR=200Hz, low power OSR1=1 · p. 5
Takes working
2 mA · VDD, normal mode typical, ODR=200Hz, high power OSR1=8 · p. 5
Takes at most
3.5 mA · VDD, continuous mode typical, OSR1=1, maximum ODR 1500Hz · p. 5
Takes asleep
1.8 µA · VDD, suspend mode typical · p. 5

What it is and has

9
Sensor
3-axis magnetic sensor · p. 2
ADC
16-bit · p. 2
Compass heading accuracy
1° to 2° · p. 2
Interface
I²C serial bus · p. 2
Package
4-pin WLCSP, 0.8x0.8x0.5mm3 · p. 2
Magnetic field range
±32 Gauss · p. 2
Temperature compensation
Temperature compensated data output · p. 2
Self-test
Built-in · p. 2
Package construction
Lead free; RoHS compliance · p. 2

Specifications

48
ParameterConditionsAs printedPage
Supply VoltageVDD; 25°Cmin 2.5 · typ 3.3 · max 3.6 V5
Suspend Mode CurrentTotal Current on VDD; 25°C, VDD=3.3Vtyp 1.8 uA5
Normal Mode Current [1]ODR=1Hz; low power mode, OSR1=1; 25°C, VDD=3.3Vtyp 6 uA5
Normal Mode Current [1]ODR=1Hz; high power mode, OSR1=8; 25°C, VDD=3.3Vtyp 10 uA5
Normal Mode Current [1]ODR=10Hz; low power mode, OSR1=1; 25°C, VDD=3.3Vtyp 30 uA5
Normal Mode Current [1]ODR=10Hz; high power mode, OSR1=8; 25°C, VDD=3.3Vtyp 100 uA5
Normal Mode Current [1]ODR=50Hz; low power mode, OSR1=1; 25°C, VDD=3.3Vtyp 150 uA5
Normal Mode Current [1]ODR=50Hz; high power mode, OSR1=8; 25°C, VDD=3.3Vtyp 500 uA5
Normal Mode Current [1]ODR=100Hz; low power mode, OSR1=1; 25°C, VDD=3.3Vtyp 300 uA5
Normal Mode Current [1]ODR=100Hz; high power mode, OSR1=8; 25°C, VDD=3.3Vtyp 1000 uA5
Normal Mode Current [1]ODR=200Hz; low power mode, OSR1=1; 25°C, VDD=3.3Vtyp 600 uA5
Normal Mode Current [1]ODR=200Hz; high power mode, OSR1=8; 25°C, VDD=3.3Vtyp 2000 uA5
Continuous Mode Current[3]OSR1=1; maximum ODR: 1500Hz; 25°C, VDD=3.3Vtyp 3500 uA5
Sensor Field RangeFull Scale; 25°C, VDD=3.3Vmin -32 · max 32 Gauss5
Sensitivity[2],[3]±32G; 25°C, VDD=3.3Vmin -5 · max 5 %5
Sensitivity[2],[3]Field Range = ±32G; 25°C, VDD=3.3Vtyp 1000 LSB/G5
Sensitivity[2],[3]Field Range = ±16G; 25°C, VDD=3.3Vtyp 2000 LSB/G5
Sensitivity[2],[3]Field Range = ±8G; 25°C, VDD=3.3Vtyp 4000 LSB/G5
Linearity[3]Field Range = ±32G; Happlied= ±16G; 25°C, VDD=3.3Vtyp 0.6 %FS5
Hysteresis[3]3 sweeps across ±32G; 25°C, VDD=3.3Vtyp 0.03 %FS5
Offset[4]Null Field Output; 25°C, VDD=3.3Vmin -1 · max 1 Gauss5
Digital ResolutionField Range = ±32G; 25°C, VDD=3.3Vtyp 1 mGauss5
Field Resolution[3]OSR=8,8; 25°C, VDD=3.3Vtyp 2.5 mGauss5
Field Resolution[3]OSR=8,4; 25°C, VDD=3.3Vtyp 3.5 mGauss5
Field Resolution[3]OSR=8,2; 25°C, VDD=3.3Vtyp 5 mGauss5
Field Resolution[3]OSR=8,1; 25°C, VDD=3.3Vtyp 7 mGauss5
Operating Temperaturemin -40 · max 85 °C5
ESDHBMmin 2000 V5
ESDCDMmin 500 V5
VDDVSS=0min -0.5 · max 5 V6
Storage TemperatureVSS=0min -40 · max 125 °C6
Exposed to Magnetic Field (all directions)VSS=0max 10000 Gauss6
Low Level Input Voltage VILVDD =VDDIO= 3.3V,Tested at 25°Cmin -0.5 V6
Input Leakage, All Inputs IILVDD =VDDIO= 3.3V,Tested at 25°Cmin -10 · max 10 uA6
Power supply rise time[1] PSUPTime Period that VDD changes from 0.2V to Operating Voltage; reference value for designmax 10 mS11
POR Completion Time[1] PORTTime Period After VDD at Operating Voltage to Ready for I2C Command[2]; reference value for designmax 3 mS11
Power off Voltage[1] SDVVoltage that Device Considered to be Power Down[2]; reference value for designmax 0.2 V11
Power on Interval[1] PINTTime Period Required for Voltage Lower than SDV to Enable Next POR[2]; reference value for designmin 100 uS11
SCL Clock fsclmin 0 · typ 100 · max 400 kHz15
SCL Low Period tlowmin 1.3 uS15
SCL High Period thighmin 0.6 uS15
SDA Setup Time tsudatmin 0.1 uS15
Start Hold Time thdstamin 0.6 uS15
Start Setup Time tsustamin 0.6 uS15
Stop Setup Time tsustomin 0.6 uS15
New Transmission Time tbufmin 1.3 uS15
Rise Time tr (trcl,trdat)min 0.02 · max 0.3 uS15
Fall Time tf (tfcl,tfdat)min 0.02 · max 0.3 uS15

Pins, by the datasheet

4
A1 VSS
Ground. · p. 7
A2 SCL
I2C serial clock line. · p. 7
B1 VDD
Supply Voltage. · p. 7
B2 SDA
I2C serial data line. · p. 7

Ordering codes, by the datasheet

1
QMC6309
WLCSP · -40°C ~ 85°C operating temperature; Tape and Reel: 5k pieces/reel · p. 22

Open-source boards using it

16See all 16
  • 2 layers34.8 × 59.7 mmCh570sao9v, the printed circuit board in 3D

    Ch570sao9v

    cnlohr/beanboy

    (Early drafts, not ready yet)

    53 parts5MIT
  • 2 layers44.7 × 93.6 mmUltisense, the printed circuit board in 3D

    Ultisense

    darshg321/Ultisense

    an esp32-s3 devboard made to sense as many things as possible

    94 parts3
  • 2 layers40 × 43 mmSlimeVR pcb, the printed circuit board in 3D

    SlimeVR pcb

    H3wastooshort/slimeinator

    71 parts2AGPL-3.0
  • 4 layers24 × 17.5 mmSlimevr nugget, the printed circuit board in 3D

    Slimevr nugget

    infopcgood/slimevr-nugget

    SlimeVR nRF52840 PCB (QFN48 package version)

    55 partsCERN-OHL-S-2.0
  • 2 layers18 × 21.1 mmSmd smores pcb, the printed circuit board in 3D

    Smd smores pcb

    infopcgood/smd-smores-pcb

    SMD SMORES PCB for SlimeVR

    50 parts
  • 2 layers21 × 18 mmSMORES, the printed circuit board in 3D

    SMORES

    infopcgood/SMORES

    Super small SlimeVR PCBs with EBYTE E73 (nRF52840) + ICM-45686

    36 parts
  • 2 layers15.2 × 33 mmPromicro smol, the printed circuit board in 3D

    Promicro smol

    picafe/promicro_smol

    Shield for the nRF52840 Pro Micro for SlimeVR trackers, supports 1.8V

    31 partsCERN-OHL-S-2.0
  • 4 layers29.5 × 16.8 mmPcf8563-breakout, the printed circuit board in 3D

    Pcf8563-breakout

    picafe/sensors-breakout

    Breakout board for variety of useful sensors in a tiny footprint!

    34 parts

Questions

Is there a KiCad symbol and footprint for the QMC6309?

Yes. The symbol is EasyEDA_Cloud:AK09918C-L and the footprint EasyEDA_Cloud:X1-WLB0808-4_L0.8-W0.8-P0.40-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the QMC6309?

WLCSP-4(0.8x0.8), with 4 pins. Its footprint is drawn on this page.

Where is the QMC6309 datasheet?

QST publishes it: the Datasheet link on this page opens it.

Where can I order the QMC6309?

JLCPCB lists it as part C5439871, with 4,710 in stock; the sellers' links on this page open their listings.

Which open-source boards use the QMC6309?

16 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.