

Slimevr nugget
SlimeVR nRF52840 PCB (QFN48 package version)
- Size
- 24 × 17.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 54
- Pads
- 199
- Tracks, vias
- 481, 94
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Mar 2026
- Updated
- 5 Jul 2026
Overview
Slimevr nugget is an open-source printed circuit board by infopcgood, from the infopcgood/slimevr-nugget repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 24 × 17.5 mm with 55 parts on 54 nets, routed with 481 tracks and 94 vias.
It is built around the QMC6309, BQ24073RGTR and LSM6DSV, with the XC6220B331MR among its other parts. Its parts include 20 capacitors, 16 resistors, 6 ICs, 2 diodes and 2 inductors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
4QMC6309
WLCSP-4(0.8x0.8)-40℃~+85℃ 16bit 2.5V~3.6V 6uA、10uA I2C ±3.2mT ±3.2mT WLCSP-4(0.8x0.8) 3D Magnetic Sensors ROHSQST3D Magnetic SensorsBQ24073RGTR
QFN-16-EP(3x3)-40℃~+125℃ 1.5A 4.2V 4.35V~6.4V 50uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementLSM6DSV
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 4.5KB Accelerometer Gyroscope SPI、I2C、I3C X,Y,Z X,Y,Z ±16g ±4000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersXC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C12, C13, C21, C22, C24 |
| 4 | 1.0uF | Capacitor_SMD:C_0402_1005Metric | C8, C14, C16, C19 |
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C11, C17, C18, C20 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R13, R15, R16 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R14 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | 0.1nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 1.0pF | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 1.2pF | Capacitor_SMD:C_0201_0603Metric | C5 |
| 1 | 1532H | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | U5 |
| 1 | 2.2nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 32MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7nH | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | BQ24073RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U7 |
| 1 | CHRG | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | LSM6DSV | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U4 |
| 1 | QMC6309 | Mumo Footprints:QMC6309 | U6 |
| 1 | SWC | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | SWD | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | nRF52833_QDxx | Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm | U2 |
Similar boards
- 2 layers34.8 × 59.7 mm

- 2 layers44.7 × 93.6 mm

- 2 layers40 × 43 mm

- 2 layers18 × 21.1 mm

- 2 layers21 × 18 mm

- 2 layers15.2 × 33 mm

Promicro smol
picafe/promicro_smol
Shield for the nRF52840 Pro Micro for SlimeVR trackers, supports 1.8V
31 partsCERN-OHL-S-2.0 - 4 layers29.5 × 16.8 mm

Pcf8563-breakout
picafe/sensors-breakout
Breakout board for variety of useful sensors in a tiny footprint!
34 parts - 8 layers50 × 50 mm

Questions
How big is the Slimevr nugget PCB?
It measures 24 × 17.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Slimevr nugget use?
55 parts, built around the QMC6309, BQ24073RGTR, LSM6DSV and XC6220B331MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slimevr nugget KiCad files?
From the infopcgood/slimevr-nugget repository on GitHub, at the commit this page was made from: the board is slimevr-nugget.kicad_pcb and its schematic slimevr-nugget.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slimevr nugget design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).