

Promicro smol
Shield for the nRF52840 Pro Micro for SlimeVR trackers, supports 1.8V
- Size
- 15.2 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 32
- Pads
- 102
- Tracks, vias
- 191, 69
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2026
- Updated
- 3 Jun 2026
Overview
Promicro smol is an open-source printed circuit board by picafe, from the picafe/promicro_smol repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 15.2 × 33 mm with 31 parts on 32 nets, routed with 191 tracks and 69 vias.
It is built around the QMC6309, HL3134KT and NH-B2020RGBA-HF. Its parts include 15 resistors, 5 transistors, 4 capacitors, 3 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) and nRF52 and nRF5x boards of this library.
Main components
3QMC6309
WLCSP-4(0.8x0.8)-40℃~+85℃ 16bit 2.5V~3.6V 6uA、10uA I2C ±3.2mT ±3.2mT WLCSP-4(0.8x0.8) 3D Magnetic Sensors ROHSQST3D Magnetic SensorsHL3134KT
SOT-523-55℃~+150℃ 1 N-channel 190mΩ@4.5V 1nC@4.5V 200mW 20V 670mV 750mA 79pF 9pF SOT-523 MOSFETs ROHShongjiachengMOSFETsNH-B2020RGBA-HF
SMD,2.1x2.1mm-30℃~+85℃ 110° 1mm 2.1mm 2.1mm B:25mcd、R:45mcd、G:160mcd Common Anode R:2V、G:2.7V、B:2.8V R:48mW、G:64mW、B:64mW R:622nm、G:525nm、B:468nm R:8mA、G:5mA、B:3mA Top-mount SMD,2.1x2.1mm RGB LEDs ROHSFoshan NationStar OptoelectronicsRGB LEDs
README
README.mdpromicro_smol
promicro_smol is a compact shield PCB for the nRF52840 Supermini/Pro Micro used in DIY SlimeVR trackers. It has an IMU, magnetometer, two buttons, RGB LED, battery pads and voltage reading functionality. It is designed to be compatible with existing Chrysalis enclosures (not yet verified). Production files can be found in /pcb/production/.
Why I Made This
This project started as a modification of Chrysalis to support operation at 1.8V logic and to add a few features. The main changes were to make the magnetometer support 1.8V logic, switch to a MOSFET-controlled RGB LED, add a battery voltage divider for better capacity measurement, and to make sure SWD pads are accessible through a board cutout. I made these changes ensuring the board is optimized for JLCPCB economic assembly.
Pictures

Schematic

PCB

Credits and Attribution
This work is derived from the kounocom/Chrysalis hardware project.
Files from /pcb/Chrysalis-Footprints.pretty are sourced from the Chrysalis project with and without modifications.
The upstream project is provided under CERN-OHL-S-2.0, and this repository includes the applicable license text in LICENSE.md.
Bill of Materials
LCSC and other supplier pricing moves with stock, demand, quantity, and exchange rates. Treat Unit cost and Total cost as a very rough estimate. For example, the LSM6DSV has increased in price significantly in the past few months due to shortages and decreasing stock.
| Item | Value / Part | Quantity | Unit cost | Total cost |
|---|---|---|---|---|
| MCU module | ProMicro nRF52840 (can be found on Aliexpress) | 1 | $3 | $3 |
| IMU | LSM6DSVETR (C41785564) | 1 | $2.27 | $2.27 |
| Magnetometer | QMC6309 (C5439871) | 1 | $0.36 | $0.36 |
| N-FETs | HL3134KT (C52204685) | 5 | $0.03 | $0.15 |
| RGB LED | NH-B2020RGBA-HF (C2874116) | 1 | $0.01 | $0.01 |
| Push buttons | Tactile Button, 160gf (C318884), Tactile Button, 160gf (C720477) | 2 | $0.07 | $0.14 |
| Resistors | 100R (C25076), 5.1k (C25905), 10k (C25744), 3M (C23156), 4.7M (C23163) | 12 | $0.01 | $0.12 |
| Capacitors | 100nF (C307331), 10nF (C15195), 2.2uF (C23630) | 4 | $0.01 | $0.04 |
Approximate component cost for 1 board: ~$6.09
PCB fabrication and assembly: JLCPCB, 2 boards PCBA, 0.8 mm, lead-free HASL — about US$40 (your quote will differ).
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10kΩ | PCM_JLCPCB:R_0402 | R1, R4, R6, R9, R13, R14, R15 |
| 5 | HL3134KT | Package_TO_SOT_SMD:SOT-523 | Q1, Q2, Q3, Q4, Q5 |
| 3 | 100Ω | PCM_JLCPCB:R_0402 | R2, R5, R8 |
| 3 | 5.1kΩ | PCM_JLCPCB:R_0402 | R3, R7, R10 |
| 2 | 100nF | PCM_JLCPCB:C_0402 | C1, C2 |
| 1 | 10nF | PCM_JLCPCB:C_0402 | C3 |
| 1 | 2.2uF | PCM_JLCPCB:C_0603 | C5 |
| 1 | 3MΩ | PCM_JLCPCB:R_0603 | R12 |
| 1 | 5.1MΩ | PCM_JLCPCB:R_0603 | R11 |
| 1 | Battery_Cell | Chrysalis-footprints:Bat_Pads | BT1 |
| 1 | LSM6DSVETR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
| 1 | NH-B2020RGBA-HF | easyeda2kicad:LED-ARRAY-SMD_4P-L2.1-W2.1-TL_NH-B2020RGBA | LED1 |
| 1 | ProMicro NRF52840 | Chrysalis-footprints:Supermini nRF52840 | U4 |
| 1 | QMC6309 | easyeda2kicad:X1-WLB0808-4_L0.8-W0.8-P0.40-TL | U2 |
| 1 | Tactile Button, 160gf | PCM_JLCPCB:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | S1 |
| 1 | Tactile Button, 160gf | easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | S2 |
Similar boards
- 4 layers80.4 × 49.3 mm

- 2 layers139.5 × 153 mm

- 2 layers32.5 × 35 mm

Kicad CheeseCake SlimeTrackers edit-
caterpy/Kicad-CheeseCake-SlimeTrackers-edit-
newslimes-cheesecake edit
31 parts - 2 layers40 × 40 mm

Topaz's Board
picovrfbt/PicoVR-Trackers
A Collection of trackers & Designs as well as documentation for PicoVR Trackers
49 partsApache-2.0 - 4 layers85.9 × 85.9 mm

Pd1180-epr r0.3
techmannih/pd1180-epr
PD1180-EPR — NEMA 34 Smart Motor-Mounted Stepper Controller with USB-C PD 3.1 EPR
277 parts - 2 layers423.5 × 392.5 mm

Mtt final
itsmevjnk/MelbourneTrainTracker
Melbourne Train Tracker project repository (SIT210, T1/2025)
758 parts40 - 2 layers53.8 × 36.2 mm

- 2 layers104 × 129 mm

Questions
How big is the Promicro smol PCB?
It measures 15.2 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Promicro smol use?
31 parts, built around the QMC6309, HL3134KT and NH-B2020RGBA-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Promicro smol KiCad files?
From the picafe/promicro_smol repository on GitHub, at the commit this page was made from: the board is pcb/promicro_smol.kicad_pcb and its schematic pcb/promicro_smol.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Promicro smol design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).