
Topaz's Board
A Collection of trackers & Designs as well as documentation for PicoVR Trackers
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 49
- Nets
- 49
- Pads
- 208
- Tracks, vias
- 355, 163
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Sep 2024
- Updated
- 18 May 2026
Overview
Topaz's Board is an open-source printed circuit board by picovrfbt, from the picovrfbt/PicoVR-Trackers repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 40 × 40 mm with 49 parts on 49 nets, routed with 355 tracks and 163 vias.
It is built around the ESP32-C3-MINI-1-N4, M3406-ADJ and BMI270, with the SRV05-4, TP4057 and 0603WAF5101 among its other parts. Its parts include 20 resistors, 11 capacitors, 5 ICs, 3 diodes and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12ESP32-C3-MINI-1-N4
SMD,16.6x13.2mm-40℃~+85℃ -98dBm 20.5dBm 350mA 3V~3.6V 84mA Integrated temperature sensor、Integrated antenna、Built-in watchdog On-board PCB Antenna SPI、UART、I2C、I2S、USB Transceiver SMD,16.6x13.2mm WiFi Modules ROHSEspressif SystemsRF ModulesM3406-ADJ
SOT-23-51 2V~6V 800mA Buck Buck Yes SOT-23-5 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersBMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersSRV05-4
SOT-23-6-55℃~+125℃ 0.3pF 15V 1uA 4.5A@8/20us 5V 60W@8/20us 9V ESD Four channels SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSMSKSEMIESD And Surge Protection (TVS/ESD)TP4057
SOT-23-6-40℃~+85℃ 1 25uA 4.24V 4V~6.5V 500mA Charging IC Lithium Battery Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 SOT-23-6 Battery Management ROHSUMWBattery Management0603WAF5101
0603-55℃~+155℃ 100mW 5.1kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountCL10A475KO8NNN
060316V 4.7uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT0603WAF1503
0603-55℃~+155℃ 100mW 150kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountNH-B2020RGBA-HF
SMD,2.1x2.1mm-30℃~+85℃ 110° 1mm 2.1mm 2.1mm B:25mcd、R:45mcd、G:160mcd Common Anode R:2V、G:2.7V、B:2.8V R:48mW、G:64mW、B:64mW R:622nm、G:525nm、B:468nm R:8mA、G:5mA、B:3mA Top-mount SMD,2.1x2.1mm RGB LEDs ROHSFoshan NationStar OptoelectronicsRGB LEDs1N5817W
SOD-123-55℃~+125℃ 1A 1mA@20V 20V 750mV@3A 9A Standalone SOD-123 Schottky Diodes ROHSCBISchottky Diodes0603WAF2001
0603-55℃~+155℃ 100mW 2kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
README
README.mdPicoVR-Trackers
A Collection of trackers & Designs as well as documentation for PicoVR Trackers
(Documentation Coming Soon)
V2 Is for the Version 2 of the trackers (rectangle, and contains all of the case files needed to complete a full rebuild of your trackers V3 is used as the same, deliberatly stopping short of the newest Tracker designs as to preserve our own deisgn until we make a new one (Contact me at DISCORD:topaz_blue to get prodution files if needed)
Files are served as is, with no new ones added as to preserve our designs
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 5k1 | Topaz's Footprints:R_0603_1608Metric | R1, R2, R3, R5, R6, R7, R8, R9, R10, R16, R17, R18, R19, R20 |
| 6 | 4.7uF | Topaz's Footprints:C_0603_1608Metric | C1, C2, C4, C5, C6, C10 |
| 5 | 100nF | Topaz's Footprints:C_0603_1608Metric | C3, C7, C8, C9, C11 |
| 4 | 150k | Topaz's Footprints:R_0603_1608Metric | R4, R12, R13, R15 |
| 3 | R_JP | Topaz's Footprints:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | LED | Topaz's Footprints:LED-ARRAY-SMD_4P-L2.1-W2.1-TL_NH-B2020RGBA | D1, D3 |
| 1 | 1N5817W | Topaz's Footprints:D_SOD-123 | D2 |
| 1 | 2k | Topaz's Footprints:R_0603_1608Metric | R11 |
| 1 | 4.7uH | Topaz's Footprints:L_0806_2012Metric | L1 |
| 1 | 680k | Topaz's Footprints:R_0603_1608Metric | R14 |
| 1 | AO3401A | Topaz's Footprints:SOT-23 | Q1 |
| 1 | BAT_PADS | Topaz's Footprints:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | BTN_BOOT | Topaz's Footprints:NewCheapoButton | SW2 |
| 1 | ESP32-C3-MINI-1-N4 | Topaz's Footprints:ESP32-C3-MINI-1 | U4 |
| 1 | IMU | Topaz's Footprints:Bosch_LGA-14_3x2.5mm_P0.5mm | U5 |
| 1 | JST-SH (Pin 2 Anode) | Topaz's Footprints:JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | BT1 |
| 1 | M3406 | Topaz's Footprints:SOT-23-5 | U1 |
| 1 | PWR_SWITCH | Topaz's Footprints:THTSwitch | SW1 |
| 1 | SRV05-4 | Topaz's Footprints:SOT-23-6 | U3 |
| 1 | TP4057 | Topaz's Footprints:SOT-23-6 | U2 |
| 1 | USB-C | Topaz's Footprints:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
Similar boards
- 2 layers46.3 × 53.3 mm

- 2 layers50 × 75 mm

- 2 layers100 × 60 mm

- 4 layers57.4 × 49.9 mm

- 8 layers120 × 100 mm

- 4 layers100 × 50 mm

- 2 layers110.1 × 110.4 mm

Mini
makerspet/oomwoo-esp32s3-cm
Pi CM4/CM5-compatible Compute Module using ESP32-S3 instead of CPU
116 parts1Apache-2.0 - 4 layers262.9 × 64.4 mm

MorphoDock
SlimeVR/SlimeVR-Morphocharger
SlimeVR Official charger design for butterfly trackers
188 parts1Apache-2.0
Questions
How big is the Topaz's Board PCB?
It measures 40 × 40 mm and has 2 copper layers, 1 mm thick.
What parts does the Topaz's Board use?
49 parts, built around the ESP32-C3-MINI-1-N4, M3406-ADJ, BMI270 and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Topaz's Board KiCad files?
From the picovrfbt/PicoVR-Trackers repository on GitHub, at the commit this page was made from: the board is V3.1/Topaz LSM-BMI/Topaz's Board.kicad_pcb and its schematic V3.1/Topaz BNO/Topaz's Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Topaz's Board design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).