Skip to the content
12345

XC6220B331MR

TECH PUBLICExtended

-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
tech-public/XC6220B331MR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
13,047 at JLCPCB (C3040644)
Used on
121 open-source boards

Overview

The XC6220B331MR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by TECH PUBLIC in a SOT-23-5 package with 5 pins. -40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:XC6220B331MR, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 13,047 are in stock at JLCPCB (part C3040644). 121 open-source boards in 95 repositories on GitHub use it.

Symbol

1VIN2GND3CE5VOUT
Regulator_Linear:XC6220B331MRFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

7
Supply, least
1.2 V · VIN, min operating input from features; conflicts with electrical table · p. 1
Supply, most
5.5 V · VIN, max operating input from features; conflicts with electrical table · p. 1
Works up to
85 °C · max operating ambient temperature · p. 2
Gives
900 mA · typical output current · p. 3
Current limit
200 mA · typical short-circuit current, VOUT = VSS · p. 3
Output
3.3 V · fixed nominal output, ordering code 33 · p. 1
Dropout
450 mV · headline dropout at 800 mA, VOUT = 3.3 V; typical/max unspecified · p. 1

What it is and has

5
Output accuracy
±2% · p. 1
Output capacitor compatibility
Ceramic or tantalum · p. 1
Protection
Current limit · p. 1
Protection
Over temperature · p. 1
Package
SOT23-5 · p. 1

Specifications

8
ParameterConditionsAs printedPage
Output Current IOUTmax 1000 mA2
Power Dissipation PdSOT23-5max 250 mW2
Soldering Temperature & Time Tsolder10smax 260 °C2
Output Voltage VOUT(E)IOUT = 100mA; limits expressed as multiples of nominal VOUTmin 0.98 · max 1.02 × VOUT3
Output Current IOUTtyp 900 mA3
Output Voltage Temperature Characteristics ΔVOUT / (ΔT × VOUT)IOUT = 100mA; −40°C ≤ T ≤ +85°Ctyp 50 ppm/°C3
Short Current IShortVOUT = VSStyp 200 mA3
Thermal Shutdown Temperature Hysteresis ΔTSDtyp 30 °C3

Pins, by the datasheet

3
2 GND
Ground. · p. 2
3 CE
Chip enable; the typical application connects CE to VIN. · p. 2
5 OUT
Regulated output. · p. 2

Open-source boards using it

121See all 121
  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 4 layers49.5 × 29 mmXESC2, the printed circuit board in 3D

    XESC2

    ClemensElflein/xESC

    The xESC is an easy to use, low cost electronic speed controller (ESC) design for sensored brushless DC (BLDC) motors.

    114 parts378
  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 2 layers87.6 × 73 mmStemcell panel, the printed circuit board in 3D

    Stemcell panel

    megamind4089/STeMCell

    STM32F4 breakout board in pro micro pinout. Designed mainly for ergo split keyboards.

    258 parts123
  • 2 layers271.5 × 91.8 mmFusion, the printed circuit board in 3D

    Fusion

    crides/fusion

    A folded minimally spaced choc mini (PG1232) keyboard for traveling

    126 parts84
  • 4 layers85.6 × 53.8 mmMuVox, the printed circuit board in 3D

    MuVox

    muvox-io/muVox

    Open Source Hardware Audio Amplifier

    128 parts84
  • 2 layers245.7 × 172.6 mmPipar point, the printed circuit board in 3D

    Pipar point

    RasmusKoit/pipar

    Pipar is a collection of keyboards

    466 parts56CERN-OHL-S-2.0
  • 2 layers251.6 × 177.8 mmMelbourneTrainTracker, the printed circuit board in 3D

    MelbourneTrainTracker

    itsmevjnk/MelbourneTrainTracker

    Melbourne Train Tracker project repository (SIT210, T1/2025)

    1,071 parts40

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the XC6220B331MR?

Yes. The symbol is Regulator_Linear:XC6220B331MR and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the XC6220B331MR?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the XC6220B331MR datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the XC6220B331MR?

JLCPCB lists it as part C3040644, with 13,047 in stock; the sellers' links on this page open their listings.

What can replace the XC6220B331MR?

Parts like it in the library: the TLV75733PDBV by Texas Instruments, the XC6220B331MR-G by Torex Semiconductor, the CJ6109B33M by Jiangsu Changjing Electronics Technology (CJ) and the MD7218E33QC3 by Shanghai Mingda Microelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the XC6220B331MR?

121 boards in 95 repositories on GitHub; the most starred are listed on this page, with their KiCad files.