Open-source KiCad boards

76 match “SlimeVR”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers70 × 36 mm
Slimevrpcb
caterpy/-deprecated-meow-slimevr
simple pcbs for slime vr
9 parts
2 layers30 × 60 mm
SlimeVR
R-Josef/SlimeVR-Hardware
This is a SlimeVR hardware project, including a PCB file and case models.
10 parts2
2 layers62.9 × 54 mm
SlimeVRMotherBoardV2
173site/SlimeVR-PCBs
Includes CAD files for the PCBs using JST six pin connectors for the extensions
14 partsMIT
4 layers36.3 × 15.2 mm
Slimevr dongle
Sasasu/slimevr-ble

30 parts1
4 layers26 × 26 mm
Slimevr nrf52810
Sasasu/slimevr-ble

41 parts1
4 layers24 × 17.5 mm
Slimevr nugget
infopcgood/slimevr-nugget
SlimeVR nRF52840 PCB (QFN48 package version)
55 partsCERN-OHL-S-2.0
2 layers50.5 × 43.9 mm
Kicad slimevr
AdamK2003/yasvrb-pcb
Yet Another SlimeVR Build - PCBs
14 parts
2 layers23.5 × 67.5 mm
SlimeVR Tracker ESP LSM6DSVDTR
PepperCat-YamanekoVillage/SlimeVR-Tracker-ESP_LSM6DSVDTR

38 parts2
2 layers17 × 22 mm
Aaronw2 slimevr slimevr motion
oomlout/oomlout_oomp_project_bot_v_2

21 parts
2 layers16.8 × 29 mm
Slimenrfdock
SlimeVR/SlimeVR-Tracker-nRF-PCB
SlimeNRF PCBs and 3D model files for cases and dock
82 parts32
2 layers27 × 12 mm
Slimenrfauxaux
SlimeVR/SlimeVR-Tracker-nRF-PCB
SlimeNRF PCBs and 3D model files for cases and dock
10 parts32
2 layers27 × 12 mm
Slimenrfauxaux
SlimeVR/SlimeVR-Tracker-nRF-PCB
SlimeNRF PCBs and 3D model files for cases and dock
10 parts32
2 layers54 × 54 mm
SlimeVRMotherBoard
kitspace-test-repos/kicad6-file-collection

14 partsMIT
2 layers49 × 25 mm
SlimeVR Tracker
CoreanXka/SlimeVR-Tracker
基于上述原因，诞生了这个项目，解决了上面的问题，并具有以下特点： - 超小尺寸，超高集成度，仅比开发板长1mm。 - 整合接口，仅用一个Type-C接口实现充电与程序下载。 - 集成最最最重要的电池保护芯片。 - 预留电池引脚接口和开关引脚接口，锂电池不再直连3.3V引脚，而是会先经过降压芯片降压后输出。 - 智能切换供电，在有外部USB供电的情况下会切断锂电池供电并进行充电，断开供电后自动使用锂电池供电。 -…
40 parts6GPL-3.0
2 layers55.8 × 44.5 mm
SlimeVR board Full
Skaut0071/SlimeVR_Tracker
Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.
47 parts1
2 layers61 × 50 mm
SlimeVR board
Skaut0071/SlimeVR_Tracker
Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.
43 parts1
2 layers40 × 20 mm
Slimenrfaux
SlimeVR/SlimeVR-Tracker-nRF-PCB
SlimeNRF PCBs and 3D model files for cases and dock
26 parts32
2 layers48.3 × 57.2 mm
BMI160
infopcgood/SlimeVR_Tracker_PCB
SlimeVR tracker PCB for personal use.
10 parts
2 layers7 × 13.4 mm
Module ultratiny
sctanf/slimevr-anftracker
old esp-based slimevr designs
15 parts1MIT
2 layers61 × 50 mm
SlimeVR board 2-5W
Skaut0071/SlimeVR_Tracker
Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.
46 parts1
2 layers30 × 30 mm
SlimeVR Tracker
xuan25/SlimeVR-Tracker-HW
Hardware design of my SlimeVR Tracker
61 parts5MIT
2 layers40 × 20 mm
Slimenrfaux
SlimeVR/SlimeVR-Tracker-nRF-PCB
SlimeNRF PCBs and 3D model files for cases and dock
34 parts32
2 layers7.7 × 9.3 mm
Module 18650
sctanf/slimevr-anftracker
old esp-based slimevr designs
17 parts1MIT
2 layers10.5 × 25.4 mm
Icm20948-breakout
TheButlah/slimevr_pcb
A collection of PCBs designed for SlimeVR full-body trackers
9 parts19