
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

simple pcbs for slime vr
Slimevrpcb is an open-source printed circuit board by caterpy, from the caterpy/-deprecated-meow-slimevr repository on GitHub. It is a 2-layer board of 70 × 36 mm with 9 parts on 27 nets, routed with 70 tracks and 37 vias.
It is built around the WEMOS D1 MINI. Its parts include 3 diodes, 1 resistor and 1 switch. It belongs with the ESP8266 boards of this library.
Outdated slime vr tracker pcbs (currently being reworked). For BNO085 and Wemos d1. These don't have a connection for an extension pcb. Approx 70mm x 36mm (want to make these smaller)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 180k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 1 | Battery | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | BT1 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | bn0085 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_Push | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | TP4056 edited | charger:TP4056 | tp4056 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | D1Mini |

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices


It measures 70 × 36 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the caterpy/-deprecated-meow-slimevr repository on GitHub, at the commit this page was made from: the board is slimevrpcb/slimevrpcb.kicad_pcb and its schematic extra/tp4056-master/tp4056_kicad6_base/tp4056.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask caterpy before reusing the design.