Module 18650
old esp-based slimevr designs
- Size
- 7.7 × 9.3 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 17
- Nets
- 14
- Pads
- 152
- Tracks, vias
- 251, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Oct 2021
- Updated
- 20 Nov 2021
Overview
Module 18650 is an open-source printed circuit board by sctanf, from the sctanf/slimevr-anftracker repository on GitHub, published under the MIT licence. It is a 2-layer board of 7.7 × 9.3 mm with 17 parts on 14 nets, routed with 251 tracks and 54 vias.
It is built around the ESP32-PICO-V3, BMX160 and BQ25125YFPR, with the NN01-110 among its other parts. Its parts include 8 capacitors, 3 ICs, 3 connectors, 2 resistors and 1 inductor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-PICO-V3
TFQFN-48-EPTFQFN-48-EP Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)BMX160
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 1KB 4uA IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersBQ25125YFPR
DSBGA-25-40℃~+125℃ 3.4V~5.5V 300mA 4.2V 700nA Charging IC I2C Lithium Battery Support DSBGA-25 Battery Management ROHSTexas InstrumentsBattery ManagementNN01-110
-2.45GHz Chip Antenna - Antennas ROHSFractus AntennasAntennas
README
README.mdslimevr-anftracker
Most recent designs are in module-35mm
Unfinished for now
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C4, C8, C9, C12 |
| 3 | 1uF | Capacitor_SMD:C_0201_0603Metric | C6, C7, C11 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 14.3k | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 14k | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | BMX160 | SamacSys_Parts:PQFN50P300X250X88-14N | IC1 |
| 1 | BQ25125YFPR | SamacSys_Parts:BGA25C40P5X5_247X253X50 | IC4 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | ESP32-PICO-V3 | SamacSys_Parts:ESP32PICOV3 | IC3 |
| 1 | NN01-110 | SamacSys_Parts:ANTC4120X120N | J1 |
| 1 | USB-C-C168688 | nrfmicro:Mid_Mount-USB_C | J2 |
More from sctanf/slimevr-anftracker
2- 4 layers18 × 35 mm

- 2 layers7 × 13.4 mm

Similar boards
- 4 layers90.2 × 95.9 mm

- 2 layers72.9 × 25.4 mm

- 4 layers40.1 × 38.1 mm

- 4 layers90.2 × 95.9 mm

Mainboard v05
alxklso/ISP-cubesat
This is the repo for the Isomer Space Program (ISP) 1U CoyoteSat CubeSat mission.
255 parts1MIT - 4 layers90 × 70 mm

Robot hub rev3
dustin-lehmann/TWIPR
See https://github.com/dustin-lehmann/TWIPR/wiki for descriptions on how to use the hardware and software
278 parts1 - 2 layers55.6 × 48.8 mm

AAquad PCB
Fberbari/AAQuad-Evolution
An original, "from scratch" quadcopter flight computer that was my favorite pet project for some time. Used it to learn all about flight and embedded development.
47 parts1MIT - 4 layers90.2 × 95.9 mm

- 4 layers44.4 × 35.8 mm

Avionics motherboard
spacecraft-design-lab-2019/avionics-motherboard
Main flight computer board for the PyCubed-1 spacecraft
76 parts
Questions
How big is the Module 18650 PCB?
It measures 7.7 × 9.3 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Module 18650 use?
17 parts, built around the ESP32-PICO-V3, BMX160, BQ25125YFPR and NN01-110. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Module 18650 KiCad files?
From the sctanf/slimevr-anftracker repository on GitHub, at the commit this page was made from: the board is module/module_18650.kicad_pcb and its schematic module/module_35mm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Module 18650 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).