
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

Yet Another SlimeVR Build - PCBs
Kicad slimevr is an open-source printed circuit board by AdamK2003, from the AdamK2003/yasvrb-pcb repository on GitHub. It is a 2-layer board of 50.5 × 43.9 mm with 14 parts on 33 nets, routed with 92 tracks and 10 vias.
It is built around the WEMOS D1 MINI. Its parts include 3 ICs, 2 diodes, 2 connectors, 1 resistor and 1 switch. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 180K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Aux | Connector_JST:JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal | J2 |
| 1 | Batt | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J1 |
| 1 | LOGO | Custom:SlimeVR_Logo | G*** |
| 1 | Slide_DPDT_SS22D06 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
| 1 | ~ | Custom:BMI270 KOUNOLAB DevBoard | U2 |
| 1 | ~ | Custom:TP4056_Generic_PCB | U3 |
The 10 most common of 14 parts.

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices


It measures 50.5 × 43.9 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AdamK2003/yasvrb-pcb repository on GitHub, at the commit this page was made from: the board is kicad-slimevr.kicad_pcb and its schematic kicad-slimevr.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AdamK2003 before reusing the design.