2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers48.3 × 57.2 mm
SlimeVR tracker PCB for personal use.
- Size
- 48.3 × 57.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 30
- Pads
- 49
- Tracks, vias
- 74, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Mar 2024
- Updated
- 4 Mar 2024
Overview
BMI160 is an open-source printed circuit board by infopcgood, from the infopcgood/SlimeVR_Tracker_PCB repository on GitHub. It is a 2-layer board of 48.3 × 57.2 mm with 10 parts on 30 nets, routed with 74 tracks and 0 vias.
It is built around the WEMOS D1 MINI. Its parts include 2 diodes, 1 resistor, 1 IC, 1 connector and 1 switch. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdSlimeVR_Tracker_PCB
This repository is for my SlimeVR project.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 180k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 3.7V Li-ion | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Auxiliary IMU | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J2 |
| 1 | LOGO | Design:SlimeVR | G*** |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U2 |
| 1 | ~ | Breakout Boards:TP4056-Module | TP4056-Module1 |
| 1 | ~ | Breakout Boards:BMI160-Module | BMI160-Module1 |
Similar boards
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
Questions
How big is the BMI160 PCB?
It measures 48.3 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMI160 use?
10 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMI160 KiCad files?
From the infopcgood/SlimeVR_Tracker_PCB repository on GitHub, at the commit this page was made from: the board is BMI160/BMI160.kicad_pcb and its schematic BMI160/BMI160.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMI160 design in my own project?
Its repository states no licence, so its author keeps all rights: ask infopcgood before reusing the design.