Skip to the content

Boards using the TPS63001DRC

83 boards

Boards in 74 GitHub repositories, designed in KiCad, that use the TPS63001DRC by Texas Instruments (-40℃~+85℃@(TA) 1 1.5MHz 1.8V~5.5V 3.3V 50uA Buck-Boost Buck-Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TPS63001DRC’s symbol, footprint and pinout are on its own page.

  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 2 layers54 × 11.6 mmBrodBoost C, the printed circuit board in 3D

    BrodBoost C

    axiometa/BrodBoost-C

    USB - C Breadboard Powersupply: BrodBoost-C

    25 parts162CERN-OHL-S-2.0
  • 2 layers53.5 × 101.8 mmSony scopeman, the printed circuit board in 3D

    Sony scopeman

    lucysrausch/sony-scopeman

    Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.

    135 parts69
  • 4 layers88 × 30 mmOled nametag, the printed circuit board in 3D

    Oled nametag

    TobleMiner/oled-nametag

    A ESP32-based OLED nametag

    123 parts54CERN-OHL-P-2.0
  • 2 layers82 × 42 mmOpen authenticator, the printed circuit board in 3D

    Open authenticator

    Open-Authenticator/hardware-design

    Hardware design files for open authenticator

    86 parts42MIT
  • 4 layers83 × 83 mmBlinkekatze, the printed circuit board in 3D

    Blinkekatze

    TobleMiner/blinkekatze

    Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

    134 parts34
  • 2 layers148.6 × 192.2 mmBadge, the printed circuit board in 3D

    Badge

    NuttyShell/NuttyBadge

    NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

    169 parts31GPL-3.0
  • 4 layers344 × 117.5 mmZellia80, the printed circuit board in 3D

    Zellia80

    mhdimo/Zellia80-HE

    Zellia80-HE PCB files source

    497 parts24LGPL-2.1
  • 2 layers70.5 × 32 mmPinebookPro M2-A+E adapter, the printed circuit board in 3D

    PinebookPro M2-A+E adapter

    TobleMiner/PBP-NGFF-A-E-adapter

    A/E Key NGFF adapter for the Pinebook Pro. Designed as drop-in replacement for the NVMe adapter.

    34 parts16MIT
  • 2 layers55 × 75 mmAniweather, the printed circuit board in 3D

    Aniweather

    hackclub/asylum

    37 parts11MIT
  • 2 layers210 × 31 mmTrhw, the printed circuit board in 3D

    Trhw

    nimitvijayvargee/trhw

    This is an RP2040 ruler that implements wifi, bluetooth, BLE along with a 4MB Flash storage, LEDs, Input buttons and some cool units and lengths!

    59 parts8
  • 4 layers84 × 28.8 mmRgb led nametag-48x16, the printed circuit board in 3D

    Rgb led nametag-48x16

    TobleMiner/RGB-led-nametag

    A small 48x16 pixel wearable LED canvas

    189 parts7MIT
  • 6 layers146.1 × 58.4 mmComp Board, the printed circuit board in 3D

    Comp Board

    badaboombox/SS-Handheld-Console

    An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

    248 parts6
  • 2 layers44.8 × 36 mmPanel, the printed circuit board in 3D

    Panel

    jeffc/nrf52-watch-obsolete

    obsolete repository - see https://github.com/jeffc/nrf52-watch-firmware

    68 parts6
  • 2 layers50 × 70 mmTime2time, the printed circuit board in 3D

    Time2time

    Resaj/time2time

    Chronometer with partials measurement for the line-following competitions

    97 parts5
  • 2 layers63.5 × 22.9 mmLoRaWan1262 jlc, the printed circuit board in 3D

    LoRaWan1262 jlc

    svcguy/LoRaWAN-Feather-Hardware

    Schematic and PCB for a Feather-compatible, LoRaWAN-compatible board

    86 parts4
  • 2 layers68.8 × 68.1 mmSmartSensor, the printed circuit board in 3D

    SmartSensor

    AvansETI/SmartSensor

    SmartSensor: a sensor to be used as sensor and actuator within existing buildings.

    68 parts2GPL-3.0
  • 4 layers100 × 70.5 mmSmart Irrigation SystemV2, the printed circuit board in 3D

    Smart Irrigation SystemV2

    Benedikt3141/Smart-Irrigation-System

    A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.

    147 parts1MIT
  • 4 layers50 × 50 mmSending Pebble, the printed circuit board in 3D

    Sending Pebble

    CohenMurray/SRAD-Telemetry-PCB

    65 parts1
  • 4 layers76 × 88 mmHoerbaer, the printed circuit board in 3D

    Hoerbaer

    drachosaurus/hoerbaer

    Hör Bär (v2)

    233 parts1
  • 2 layers100 × 50 mmCustom meshtastic node, the printed circuit board in 3D

    Custom meshtastic node

    kyrg4z/custom-meshtastic-node

    Custom mesh node with an OLED and GNSS module.

    52 parts1CC-BY-SA-4.0
  • 4 layers90 × 50 mmCryobelt, the printed circuit board in 3D

    Cryobelt

    michael201110/cryobelt

    100 parts1
  • 4 layers55.4 × 56.6 mmSteady hands, the printed circuit board in 3D

    Steady hands

    SijWoo/steady-hands

    Wearable to remedy shaky hands

    78 parts1GPL-3.0
  • 4 layers75 × 130 mmESP32GPSPCB, the printed circuit board in 3D

    ESP32GPSPCB

    uzzambutt/ESP32_Offline_GPS_MAPS

    just adding it here temporarily to sync hackatime with it!

    67 parts1