Skip to the content
11

TPS63001DRC

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 1.5MHz 1.8V~5.5V 3.3V 50uA Buck-Boost Buck-Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHS

Part id
ti/TPS63001DRC
Category
DC DC Converters
Package
VSON-10-EP(3x3)
Pins
11
In stock
3,825 at JLCPCB (C28060)
Used on
83 open-source boards

Overview

The TPS63001DRC is a DC DC Converter made by Texas Instruments in a VSON-10-EP(3x3) package with 11 pins. -40℃~+85℃@(TA) 1 1.5MHz 1.8V~5.5V 3.3V 50uA Buck-Boost Buck-Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS63001, from KiCad's library) and its footprint (Package_SON:Texas_DRC0010J, from KiCad's library), ready for a KiCad board. 3,825 are in stock at JLCPCB (part C28060). 83 open-source boards in 74 repositories on GitHub use it.

Symbol

1VOUT2L23PGND4L15VIN6EN7PS/SYNC8VINA9GND10FB
Regulator_Switching:TPS63001From KiCad's library

Footprint

11
Package_SON:Texas_DRC0010JFrom KiCad's library

From the datasheet

16
Supply, least
1.8 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
7 V · VIN and VINA, absolute max · p. 4
Works from
-40 °C · Operating free air temperature min · p. 4
Works up to
85 °C · Operating free air temperature max · p. 4
Junction, hottest
150 °C · Virtual junction temperature absolute max · p. 4
Takes working
41 µA · sum of VIN and VINA typical quiescent currents, no load, enabled, 3.6 V input · p. 5
Takes asleep
100 nA · Shutdown current typical, EN = 0 V, VIN = VINA = 3.6 V · p. 5
Gives
1.2 A · Rated max output at 3.3 V in step-down mode, VIN = 3.6 V to 5.5 V · p. 1
Gives
800 mA · Rated max output at 3.3 V in boost mode, VIN > 2.4 V · p. 1
Current limit
1.8 A · Switch current limit typical, VIN = VINA = 3.6 V, TA = 25°C · p. 5
Junction to air (DRC (VSON))
46.8 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRC (VSON))
62.5 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DRC (VSON))
21.4 K/W · Junction-to-board thermal resistance · p. 4
Junction, hottest
125 °C · maximum recommended junction temperature · p. 16
Junction to air (DRC)
48.7 K/W · junction to ambient, exposed thermal pad soldered · p. 16

What it is and has

3
Efficiency
Up to 96% · p. 1
Shutdown
Load disconnect · p. 1
Protection
Overtemperature protection · p. 1

Around it

7
cap 10 μF
between VIN and PGND; C1 in the typical application; 6.3 V, 0603, X7R ceramic. · p. 10
cap 2 × 10 μF
between VOUT and PGND; C2 in the typical application; 6.3 V, 0603, X7R ceramic. · p. 10
cap 0.1 μF
between VINA and GND; C3 in the typical application; X7R ceramic. · p. 10
res 100 Ω
between VIN and VINA; R3 in the typical application. · p. 10
ind VLF4012-2R2
between L1 and L2; TDK inductor L1 in the typical application. · p. 10
cap 4.7-μF
between VIN and PGND; Minimum recommended input capacitance; ceramic, placed as close as possible to VIN and PGND. · p. 12
cap 15 µF
between VOUT and PGND; Recommended nominal output capacitance; ceramic, placed as close as possible to VOUT and PGND. · p. 12

Specifications

33
ParameterConditionsAs printedPage
Input voltage on VIN, VINA, L1, L2, VOUT, PS/SYNC, EN, FBOver operating free-air temperature rangemin -0.3 · max 7 V4
Operating virtual junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmax 1000 V4
Supply voltage at VIN, VINAmin 1.8 · max 5.5 V4
Operating free air temperature TAmin -40 · max 85 °C4
Operating virtual junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADRC (VSON), 10 pinstyp 46.8 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DRC (VSON), 10 pinstyp 62.5 °C/W4
Junction-to-board thermal resistance RθJBDRC (VSON), 10 pinstyp 21.4 °C/W4
Junction-to-top characterization parameter ψJTDRC (VSON), 10 pinstyp 1.4 °C/W4
Junction-to-board characterization parameter ψJBDRC (VSON), 10 pinstyp 21.5 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)DRC (VSON), 10 pinstyp 4.1 °C/W4
Input voltage range VINmin 1.8 · max 5.5 V5
Input voltage range for start-up VINmin 1.9 · max 5.5 V5
Oscillator frequency fmin 1250 · max 1500 kHz5
Frequency range for synchronizationmin 1250 · max 1800 kHz5
Switch current limit ISWVIN = VINA = 3.6 V, TA = 25°Cmin 1600 · typ 1800 · max 2000 mA5
High-side switch ON-resistanceVIN = VINA = 3.6 Vtyp 100 mΩ5
Low-side switch ON-resistanceVIN = VINA = 3.6 Vtyp 100 mΩ5
Line regulationmax 0.5 %5
Load regulationmax 0.5 %5
Quiescent current IqVIN; IOUT = 0 mA, VEN = VIN = VINA = 3.6 V, VOUT = 3.3 Vtyp 1 · max 1.5 uA5
Quiescent current IqVINA; IOUT = 0 mA, VEN = VIN = VINA = 3.6 V, VOUT = 3.3 Vtyp 40 · max 50 uA5
FB input impedance (fixed output voltage)TPS63001typ 1 MΩ5
Shutdown current ISVEN = 0 V, VIN = VINA = 3.6 Vtyp 0.1 · max 1 uA5
Undervoltage lockout threshold VUVLOVINA voltage decreasingmin 1.5 · typ 1.7 · max 1.8 V5
EN, PS/SYNC input low voltage VILmax 0.4 V5
EN, PS/SYNC input high voltage VIHmin 1.2 V5
EN, PS/SYNC input currentClamped on GND or VINAtyp 0.01 · max 0.1 uA5
Overtemperature protectiontyp 140 °C5
Overtemperature hysteresistyp 20 °C5

Pins, by the datasheet

10
1 VOUT
Buck-boost converter output. · p. 3
2 L2
Connection for inductor. · p. 3
3 PGND
Power ground. · p. 3
4 L1
Connection for inductor. · p. 3
5 VIN
Supply voltage for power stage. · p. 3
6 EN
Enable input: 1 enabled, 0 disabled. · p. 3
7 PS/SYNC
Power-save mode: 1 disabled, 0 enabled; accepts a clock signal for synchronization. · p. 3
8 VINA
Supply voltage for control stage. · p. 3
9 GND
Control / logic ground. · p. 3
10 FB
Voltage feedback; must be connected to VOUT for this fixed output voltage version. · p. 3

Ordering codes, by the datasheet

3
TPS63001DRCR
VSON, DRC, 10 pins · Package quantity 3000 · p. 18
TPS63001DRCRG4
VSON, DRC, 10 pins · Package quantity 3000; G4 ordering option · p. 18
TPS63001DRCT
VSON, DRC, 10 pins · Package quantity 250 · p. 18

Open-source boards using it

83See all 83
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 2 layers54 × 11.6 mmBrodBoost C, the printed circuit board in 3D

    BrodBoost C

    axiometa/BrodBoost-C

    USB - C Breadboard Powersupply: BrodBoost-C

    25 parts162CERN-OHL-S-2.0
  • 2 layers53.5 × 101.8 mmSony scopeman, the printed circuit board in 3D

    Sony scopeman

    lucysrausch/sony-scopeman

    Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.

    135 parts69
  • 4 layers88 × 30 mmOled nametag, the printed circuit board in 3D

    Oled nametag

    TobleMiner/oled-nametag

    A ESP32-based OLED nametag

    123 parts54CERN-OHL-P-2.0
  • 2 layers82 × 42 mmOpen authenticator, the printed circuit board in 3D

    Open authenticator

    Open-Authenticator/hardware-design

    Hardware design files for open authenticator

    86 parts42MIT
  • 4 layers83 × 83 mmBlinkekatze, the printed circuit board in 3D

    Blinkekatze

    TobleMiner/blinkekatze

    Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

    134 parts34
  • 2 layers148.6 × 192.2 mmBadge, the printed circuit board in 3D

    Badge

    NuttyShell/NuttyBadge

    NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

    169 parts31GPL-3.0
  • 4 layers344 × 117.5 mmZellia80, the printed circuit board in 3D

    Zellia80

    mhdimo/Zellia80-HE

    Zellia80-HE PCB files source

    497 parts24LGPL-2.1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS63001DRC?

Yes. The symbol is Regulator_Switching:TPS63001 and the footprint Package_SON:Texas_DRC0010J, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS63001DRC?

VSON-10-EP(3x3), with 11 pins. Its footprint is drawn on this page.

Where is the TPS63001DRC datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS63001DRC?

JLCPCB lists it as part C28060, with 3,825 in stock; the sellers' links on this page open their listings.

What can replace the TPS63001DRC?

Parts like it in the library: the XL1509-3.3 by UMW, the XL1509-3.3E1 by XLSEMI, the TPS613221ADBV by Texas Instruments and the LM2596S-3.3(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS63001DRC?

83 boards in 74 repositories on GitHub; the most starred are listed on this page, with their KiCad files.