Skip to the content
123345

LM2596S-3.3

GRExtended

-20℃~+70℃ 1 170kHz 2mA 3.3V 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHS

DatasheetJLCPCBLCSC
Part id
gr/LM2596S-3.3
Category
DC DC Converters
Package
TO-263-5L
Pins
6
In stock
4,969 at JLCPCB (C19631822)
Used on
79 open-source boards

Overview

The LM2596S-3.3 is a DC DC Converter made by GR in a TO-263-5L package with 5 pins. -20℃~+70℃ 1 170kHz 2mA 3.3V 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LM2596S-3.3, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-263-5_TabPin3, from KiCad's library), ready for a KiCad board. 4,969 are in stock at JLCPCB (part C19631822). 79 open-source boards in 67 repositories on GitHub use it.

Symbol

VIN1OUT2GND3FB4ON/OFF5
Regulator_Switching:LM2596S-3.3From KiCad's library

Footprint

123345
Package_TO_SOT_SMD:TO-263-5_TabPin3From KiCad's library

Pinout

5
The pins of the LM2596S-3.3
PinNameType
1VINPower in
2OUTOutput
3GNDPower in
4FBInput
5ON/OFFInput

Open-source boards using it

79See all 79
  • 2 layers100 × 80 mmMeganecan gw, the printed circuit board in 3D

    Meganecan gw

    Barbedx/MeganeCAN

    ESP32-based CAN-bus companion for Renault Megane 2 infotainment displays.

    68 parts3
  • 4 layers80 × 95 mmUsb charging hub, the printed circuit board in 3D

    Usb charging hub

    hackclub/reflow

    A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.

    214 parts2
  • 4 layers149.5 × 113 mm1. PDU, the printed circuit board in 3D

    1. PDU

    SshgurkiratSingh/CCMS_PORTAL

    A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.

    111 parts2
  • 2 layers140.3 × 98.7 mmMEOW System Integration, the printed circuit board in 3D

    MEOW System Integration

    andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing

    M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.

    40 parts1Apache-2.0
  • 2 layers50 × 50 mmFlashgordon, the printed circuit board in 3D

    Flashgordon

    c-base/flashgordon

    FLASH! AHHHHH!

    26 parts1GPL-3.0
  • 2 layers175 × 90 mmController, the printed circuit board in 3D

    Controller

    Circuit-Digest/machine-vision-robotic-assembly-system

    A machine vision-based robotic assembly system using the MechArm 270, NVIDIA Jetson Nano, and a custom ESP32 controller board for automated pick-and-place and miniature car assembly.

    95 parts1MIT
  • 2 layers142.5 × 99 mmPCB Prrojects, the printed circuit board in 3D

    PCB Prrojects

    PipistarXu/stm32g431-lm2596-board

    24 parts1MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2596S-3.3?

Yes. The symbol is Regulator_Switching:LM2596S-3.3 and the footprint Package_TO_SOT_SMD:TO-263-5_TabPin3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2596S-3.3?

TO-263-5L, with 5 pins. Its footprint is drawn on this page.

Where is the LM2596S-3.3 datasheet?

GR publishes it: the Datasheet link on this page opens it.

Where can I order the LM2596S-3.3?

JLCPCB lists it as part C19631822, with 4,969 in stock; the sellers' links on this page open their listings.

What can replace the LM2596S-3.3?

Parts like it in the library: the LM2596S-3.3(UMW) by UMW, the LM2596S-3.3/TR by HGSEMI, the LM2576S-3.3/TR by HGSEMI and the LM2596S-3.3 by TDSEMIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2596S-3.3?

79 boards in 67 repositories on GitHub; the most starred are listed on this page, with their KiCad files.