2 layers140 × 100 mm
2 layers100 × 70 mm
UPSMonitorStandalone rev01
enriquewph/esp-map4Modular hardware for IoT & home automation
- Size
- 100 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 104
- Pads
- 406
- Tracks, vias
- 861, 418
- Pours
- 446
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Apr 2023
- Updated
- 26 Nov 2024
Overview
UPSMonitorStandalone rev01 is an open-source printed circuit board by enriquewph, from the enriquewph/esp-map repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 70 mm with 110 parts on 104 nets, routed with 861 tracks and 418 vias.
It is built around the MAX3232ID, LM2596S-3.3 and AMS1117-5.0, with the BAT54S, BC817 and SS14 among its other parts. Its parts include 36 resistors, 15 capacitors, 14 diodes, 13 ICs and 11 connectors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
8
MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
LM2596S-3.3
TO-263-5L-20℃~+70℃ 1 170kHz 2mA 3.3V 3A 4.5V~40V Buck Buck Built-in Fixed No TO-263-5L DC-DC Converters ROHSGRDC-DC Converters
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesIRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdParts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R24, R25 +5 |
| 10 | 10k | Resistor_SMD:R_1206_3216Metric | R2, R3, R4, R5, R6, R7, R30, R32, R34, R36 |
| 6 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C7, C10, C12, C13, C14 |
| 6 | PC817XI | Package_DIP:SMDIP-4_W9.53mm | U8, U9, U10, U11, U12, U13 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6 |
| 4 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D9, D10, D13, D14 |
| 4 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q4, Q5 |
| 4 | LED | LED_SMD:LED_1206_3216Metric | D3, D5, D7, D11 |
| 3 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J1, J2, J3 |
| 3 | M7 | Diode_SMD:D_SMA_Handsoldering | D4, D6, D8 |
| 3 | RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2, K3 |
| 3 | Screw_Terminal_01x03 | libs:TerminalBlock_bornier-3_P5.08mm | J4, J5, J6 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric | R27, R28 |
| 2 | 470uF | libs:CAP_10x10_SMD_THT | C9, C11 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_4mm_Pad_Via | H1, H2 |
| 2 | SS14 | Diode_SMD:D_SMA_Handsoldering | D2, D12 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2 |
| 1 | 1nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric | R23 |
| 1 | 5k6 | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 68uH | libs:L_12x12mm_H8mm | L1 |
| 1 | ACS712 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | ACS759 | libs:Allegro_CB_PFF | U6 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J12 |
| 1 | Conn_01x06 | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J8 |
| 1 | Conn_01x10 | Connector_Molex:Molex_KK-254_AE-6410-10A_1x10_P2.54mm_Vertical | J10 |
| 1 | DS1233A-10 | Package_TO_SOT_THT:TO-92 | U2 |
| 1 | ESP32 | esp32-wroom-roover:ESP32-WROOM-32 | U3 |
| 1 | ICSP | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J9 |
| 1 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | LM2596S-3.3 | libs:TO-263-5_TabPin3 | U4 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Screw_Terminal_01x02 | libs:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
The 106 most common of 110 parts.
More from enriquewph/esp-map
4- 2 layers100 × 70 mm
- 2 layers100 × 50 mm
- 2 layers78 × 20 mm
Similar boards
- 2 layers107 × 62 mm
- 2 layers99.5 × 99.5 mm
ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
155 parts3MIT - 2 layers181.1 × 244 mm
Main MagicAlonso rounded
JRegi/MagicAlonso-LineFollower
Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.
412 partsMIT - 2 layers100 × 65.9 mm
FCI SAMD51-Universal Controller
libertathiest/FCI-SAMD51-Universal-Controller
SAMD51 handheld controller for FCI flow meters: KiCad hardware, PlatformIO firmware, FreeCAD enclosure
101 parts - 2 layers100 × 100 mm
Power supply
gabrielfbdiniz/PFC-Boost-STM32
Conversor estático de potência CA/CC com Correção Ativa do Fator de Potência (Active PFC) na topologia Boost, projetado para elevar a tensão da rede elétrica retificada (127V / 220V AC) para um barramento CC…
89 parts - 2 layers80 × 40 mm
Att85
stefan-misik/ws2812b-light
Minimalist Christmas lights using WS2812B LEDs and ATtiny85 or STM32G070
41 parts3MIT - 2 layers100.6 × 131 mm
Habitat V5
machadoleonardo94/HabitatControl-hardware
Hardware files for HabitatControl, designed on DipTrace
161 parts1 - 4 layers50 × 50 mm
FlightController Drone
damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.
157 parts
Questions
How big is the UPSMonitorStandalone rev01 PCB?
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UPSMonitorStandalone rev01 use?
110 parts, built around the MAX3232ID, LM2596S-3.3, AMS1117-5.0 and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UPSMonitorStandalone rev01 KiCad files?
From the enriquewph/esp-map repository on GitHub, at the commit this page was made from: the board is hardware/UPSMonitorStandalone_rev01/UPSMonitorStandalone_rev01.kicad_pcb and its schematic hardware/ControlModule/ControlModule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UPSMonitorStandalone rev01 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).