

Zellia80
Zellia80-HE PCB files source
- Size
- 344 × 117.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 497
- Nets
- 263
- Pads
- 1,817
- Tracks, vias
- 2,142, 2,330
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Oct 2023
- Updated
- 2 May 2025
Overview
Zellia80 is an open-source printed circuit board by mhdimo, from the mhdimo/Zellia80-HE repository on GitHub, published under the LGPL-2.1 licence. It is a 4-layer board of 344 × 117.5 mm with 497 parts on 263 nets, routed with 2,142 tracks and 2,330 vias.
It is built around the SLSS49E-3, TPS63001DRC and W25Q16JVSSIQ, with the CD74HC4067SM96 and SK6812MINI-EA among its other parts. Its parts include 282 capacitors, 98 ICs, 7 resistors, 3 connectors and 2 switches. It belongs with the STM32 boards of this library.
Main components
5SLSS49E-3
SOT-23-40℃~+150℃ 1.5mA 3V~12V 5mA Built-in Schmitt trigger Omnipolar SOT-23 Linear Hall Sensors ROHSSlkorHall SwitchesTPS63001DRC
VSON-10-EP(3x3)-40℃~+85℃@(TA) 1 1.5MHz 1.8V~5.5V 3.3V 50uA Buck-Boost Buck-Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHCD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersSK6812MINI-EA
SMD-4P,3.2x2.8mm-40℃~+85℃ 0.6mA 1.78mm 100ns 100ns 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 500ns 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,3.2x2.8mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdZellia80-HE
非常感谢梁子琳提供的免费图片
(we HEAVILY do not reccomend to order the pcb from JLC as it is still in a phase of development state)
Overview
Zellia80 HE Keyboard project is a TKL Hall-Effect keyboard with a bottom row tsangan.
This PCB design is compatible with the Unified Daughterboard C5 (available from KBDFans).
Features
- Hall-Effect Sensors:
- Uses HAL9303SO Hall-effect sensors.
- Microcontroller:
- Based on the STM32G474.
- Multiplexing:
- Integrates 8 multiplexers (8 total, 2 for each ADC).
- RGB:
- SK6812 RGB leds.
- Daughterboard Compatibility:
- Compatible with the Unified Daughterboard C5.
- Layout & Compatibility:
- Zellia is compatible with any daughterboard powered keyboard as long as you have a proper plate with compatible standoffs and KBDFans M2-3 Countersunk flat head screw kit (Available from KBDFans). (E.G. Tiger 80 Lite)
Getting Started
Prerequisites
To use this PCB project, you'll need:
- A PCB fabrication service to manufacture the board. (JLCPCB)
- Please refer to the RELEASE section for the production files.
- A Unified Daughterboard C5 for mounting.
- JST cable
Layout Compatibility
License
This project is licensed under the LGPL-2.1 License. See the LGPL-2.1 License file for details.
Contributors
Thanks to Zilin (梁子琳) Liang for the logo graphics.
Huge thanks to MaiTheSan for reworking in the best possible way the keyboard.
Parts
497| Qty | Value | Footprint | References |
|---|---|---|---|
| 112 | 0.1uF | Common_Footprint:C_0402 | C101, C102, C103, C104, C105, C106, C109, C110, C111, C112, C113, C114, C115, C117, C119, C120 +96 |
| 87 | 0.1uF | Common_Footprint:C_0603 | C10, C11, C12, C13, C205, C206, C207, C208, C209, C210, C211, C212, C213, C214, C215, C216 +71 |
| 77 | 4.7nF | Common_Footprint:C_0402 | C1, C15, C16, C100, C107, C108, C116, C118, C145, C151, C152, C154, C155, C157, C161, C162 +61 |
| 75 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_1U | U1, U2, U10, U13, U14, U16, U17, U18, U20, U22, U23, U24, U25, U26, U27, U28 +59 |
| 47 | SK6812_Mini_E | RGB_Addressable:SK6812_Mini_E | RGB1, RGB2, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18, RGB19, RGB20, RGB21, RGB22, RGB23 +31 |
| 40 | SK6812_Mini_E | RGB_Addressable:SK6812_Mini_E_REV | RGBF1, RGBF2, RGBF10, RGBF11, RGBF12, RGBF13, RGBF14, RGBF15, RGBF16, RGBF17, RGBF18, RGBF19, RGBF20, RGBF21, RGBF22, RGBF23 +24 |
| 16 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4, H5, H7, H8, H10, H11, H12, H13, H14, H15, H16, H17, H18 |
| 8 | CD74HC4067SM | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U15, U21, U51, U56, U62, U68, U69, U74 |
| 6 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_1.5U | U4, U6, U8, U11, U89, U98 |
| 3 | 10uF | Common_Footprint:C_0402 | C7, C14, C20 |
| 2 | 100R | Resistor_SMD:R_0402_1005Metric | R15, R113 |
| 2 | 10k | Common_Footprint:R_0402 | R9, R14 |
| 2 | 22R | Common_Footprint:R_0402 | R12, R13 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C165 |
| 1 | 10nF | Common_Footprint:C_0402 | C286 |
| 1 | 1k5 | Common_Footprint:R_0402 | R11 |
| 1 | 1uF | Common_Footprint:C_0402 | C287 |
| 1 | 2.2uH | Inductor_SMD:L_TDK_NLV25_2.5x2.0mm | L1 |
| 1 | 8Mhz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y2 |
| 1 | Conn_01x04 | Common_Footprint:JST-SR-4 | J2 |
| 1 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_2.25U | U33 |
| 1 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_2.25U-ReversedStabilizers | U84 |
| 1 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_2.75U | U57 |
| 1 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_7U-ReversedStabilizers | U7 |
| 1 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_1.75U | U12 |
| 1 | SLSS49E-3 | Hall_Sensor_Keyboard:SLSS49E_MX_2U | U3 |
| 1 | STM32G474CETx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U101 |
| 1 | TPS63001 | Package_SON:Texas_DRC0010J_ThermalVias | U85 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U102 |
Similar boards
- 2 layers303.8 × 94.2 mm

- 2 layers139 × 113.5 mm

- 2 layers138.1 × 114.3 mm

- 4 layers315 × 147.2 mm

- 2 layers273.8 × 109 mm

TrueStrike42
byungyoonc/TrueStrike42
TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.
167 parts24 - 2 layers242.9 × 95.3 mm

- 2 layers101.3 × 196.5 mm

Panelized
gamaPhy/Hallmoeba
This repository contains assets for the Hallmoeba, a single-switch PCB for Gateron's KS-20 Hall effect switch. It is also compatible with Wooting's Lekker switch, which is based on the KS-20.
1,200 parts6CERN-OHL-P-2.0 - 2 layers278.9 × 138.4 mm

TrueStrike56
byungyoonc/TrueStrike56
TrueStrike56 is a columnar staggered unibody split hall effect keyboard with popular 4x6_4 layout.
211 parts3MIT
Questions
How big is the Zellia80 PCB?
It measures 344 × 117.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Zellia80 use?
497 parts, built around the SLSS49E-3, TPS63001DRC, W25Q16JVSSIQ and CD74HC4067SM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zellia80 KiCad files?
From the mhdimo/Zellia80-HE repository on GitHub, at the commit this page was made from: the board is Zellia80.kicad_pcb and its schematic MUX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zellia80 design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).