Skip to the content
123456789101112131415161718192021222324

CD74HC4067SM96

Texas InstrumentsExtended

-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHS

Part id
ti/CD74HC4067SM96
Category
Analog Switches, Multiplexers
Package
SSOP-24-208mil
Pins
24
In stock
2,780 at JLCPCB (C98457)
Used on
116 open-source boards

Overview

The CD74HC4067SM96 is an analog Switches, Multiplexer made by Texas Instruments in a SSOP-24-208mil package with 24 pins. -55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHS.

PCBKit's library has its KiCad symbol (dk_Interface-Analog-Switches-Multiplexers-Demultiplexers:CD74HC4067SM96, from Digikey) and its footprint (Package_SO:SSOP-24_5.3x8.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2,780 are in stock at JLCPCB (part C98457). 116 open-source boards in 86 repositories on GitHub use it.

Symbol

1COM2I73I64I55I46I37I28I19I010S011S112GND13S314S215E16I1517I1418I1319I1220I1121I1022I923I824VCC
dk_Interface-Analog-Switches-Multiplexers-Demultiplexers:CD74HC4067SM96From Digikey

Footprint

123456789101112131415161718192021222324
Package_SO:SSOP-24_5.3x8.2mm_P0.65mmFrom KiCad's library

From the datasheet

12
Supply, least
2 V · VCC, recommended operating min, HC types · p. 6
Supply, most
6 V · VCC, recommended operating max, HC types · p. 6
Supply, absolute maximum
7 V · VCC, absolute max, HC · p. 5
Works from
-55 °C · Ambient temperature min · p. 6
Works up to
125 °C · Ambient temperature max · p. 6
Junction, hottest
150 °C · Junction temperature absolute max, plastic package · p. 5
Takes working
8 µA · Quiescent device current max, VCC = 6 V, VI = VCC or GND, 25°C · p. 8
Takes at most
160 µA · Quiescent device current max, VCC = 6 V, VI = VCC or GND, –55°C to 125°C · p. 8
A pin gives at most
25 mA · Source or sink current per output pin absolute max · p. 5
Junction to air (SM (SSOP))
96.2 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (SM (SSOP))
65.1 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (SM (SSOP))
60 K/W · Junction-to-case top thermal resistance · p. 6

What it is and has

5
Analog switch channels
16-channel multiplexer and demultiplexer · p. 1
Switching
Break-before-make · p. 1
ON resistance
70Ω typical at VCC = 4.5V · p. 1
ON resistance
60Ω typical at VCC = 6V · p. 1
Package
SSOP(24), 8.20mm × 7.40mm nominal body · p. 1

Specifications

73
ParameterConditionsAs printedPage
DC Supply voltage VCC HCHC; over operating free-air temperature rangemin -0.5 · max 7 V5
DC input diode current IIKFor VI < -0.5V or VI > VCC + 0.5Vmin -20 · max 20 mA5
DC output diode current IOKFor VO < -0.5V or VO > VCC + -0.5Vmin -20 · max 20 mA5
DC VCC or ground current ICCOver operating free-air temperature rangemin -50 · max 50 mA5
DC Output Source or Sink Current per Output Pin IOFor VO > -0.5V or VO < VCC + -0.5Vmin -25 · max 25 mA5
Maximum junction temperature (Plastic Package) TJMAXPlastic Packagemax 150 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Junction-to-ambient thermal resistance RθJASM (SSOP), 24 PINStyp 96.2 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)SM (SSOP), 24 PINStyp 60 °C/W6
Junction-to-board thermal resistance RθJBSM (SSOP), 24 PINStyp 65.1 °C/W6
Junction-to-top characterization parameter ΨJTSM (SSOP), 24 PINStyp 21.1 °C/W6
Junction-to-board characterization parameter ΨJBSM (SSOP), 24 PINStyp 64.4 °C/W6
Supply voltage range (TA = full package temperature range) VCCCD54 and 74HC typesmin 2 · max 6 V6
Analog switch I/O voltage VISMaximum = VCCmin 0 V6
Ambient temperature TAmin -55 · max 125 °C6
Input rise and fall times tr , tfVCC = 2Vmin 0 · max 1000 ns6
Input rise and fall times tr , tfVCC = 4.5 Vmin 0 · max 500 ns6
Input rise and fall times tr , tfVCC = 6Vmin 0 · max 400 ns6
High Level Input Voltage VIHVCC = 2 V, TA = 25°Cmin 1.5 V7
High Level Input Voltage VIHVCC = 2 V, TA = –40°C to +85°Cmin 1.5 V7
High Level Input Voltage VIHVCC = 2 V, TA = –55°C to +125°Cmin 1.5 V7
High Level Input Voltage VIHVCC = 4.5 V, TA = 25°Cmin 3.15 V7
High Level Input Voltage VIHVCC = 4.5 V, TA = –40°C to +85°Cmin 3.15 V7
High Level Input Voltage VIHVCC = 4.5 V, TA = –55°C to +125°Cmin 3.15 V7
High Level Input Voltage VIHVCC = 6 V, TA = 25°Cmin 4.2 V7
High Level Input Voltage VIHVCC = 6 V, TA = –40°C to +85°Cmin 4.2 V7
High Level Input Voltage VIHVCC = 6 V, TA = –55°C to +125°Cmin 4.2 V7
Low Level Input Voltage VILVCC = 2 V, TA = 25°Cmax 0.5 V7
Low Level Input Voltage VILVCC = 2 V, TA = –40°C to +85°Cmax 0.5 V7
Low Level Input Voltage VILVCC = 2 V, TA = –55°C to +125°Cmax 0.5 V7
Low Level Input Voltage VILVCC = 4.5 V, TA = 25°Cmax 1.35 V7
Low Level Input Voltage VILVCC = 4.5 V, TA = –40°C to +85°Cmax 1.35 V7
Low Level Input Voltage VILVCC = 4.5 V, TA = –55°C to +125°Cmax 1.35 V7
Low Level Input Voltage VILVCC = 6 V, TA = 25°Cmax 1.8 V7
Low Level Input Voltage VILVCC = 6 V, TA = –40°C to +85°Cmax 1.8 V7
Low Level Input Voltage VILVCC = 6 V, TA = –55°C to +125°Cmax 1.8 V7
"ON" Resistance IO = 1mA RONVIS = VCC or GND, VI = VCC or GND, VCC = 4.5 V, TA = 25°Ctyp 70 · max 160 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC or GND, VI = VCC or GND, VCC = 4.5 V, TA = –40°C to +85°Cmax 200 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC or GND, VI = VCC or GND, VCC = 4.5 V, TA = –55°C to +125°Cmax 240 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC or GND, VI = VCC or GND, VCC = 6 V, TA = 25°Ctyp 60 · max 140 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC or GND, VI = VCC or GND, VCC = 6 V, TA = –40°C to +85°Cmax 175 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC or GND, VI = VCC or GND, VCC = 6 V, TA = –55°C to +125°Cmax 210 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC to GND, VI = VCC to GND, VCC = 4.5 V, TA = 25°Ctyp 90 · max 180 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC to GND, VI = VCC to GND, VCC = 4.5 V, TA = –40°C to +85°Cmax 225 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC to GND, VI = VCC to GND, VCC = 4.5 V, TA = –55°C to +125°Cmax 270 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC to GND, VI = VCC to GND, VCC = 6 V, TA = 25°Ctyp 80 · max 160 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC to GND, VI = VCC to GND, VCC = 6 V, TA = –40°C to +85°Cmax 200 Ω7
"ON" Resistance IO = 1mA RONVIS = VCC to GND, VI = VCC to GND, VCC = 6 V, TA = –55°C to +125°Cmax 240 Ω7
"ON" Resistance Between Any Two Switches ΔRONVCC = 4.5 V, TA = 25°Ctyp 10 Ω7
"ON" Resistance Between Any Two Switches ΔRONVCC = 6 V, TA = 25°Ctyp 8.5 Ω7
Off-Switch Leakage Current IZE = VCC, VI = VCC or GND, VCC = 6 V, TA = 25°C; maximum is ±0.8 uAmax 0.8 uA7
Off-Switch Leakage Current IZE = VCC, VI = VCC or GND, VCC = 6 V, TA = –55°C to 85°C; maximum is ±8 uAmax 8 uA7
Off-Switch Leakage Current IZE = VCC, VI = VCC or GND, VCC = 6 V, TA = –55°C to 125°C; maximum is ±8 uAmax 8 uA7
Input Leakage Current (Any Control) IILVI = VCC or GND, VCC = 6 V, TA = 25°C; maximum is ±0.1 uAmax 0.1 uA7
Input Leakage Current (Any Control) IILVI = VCC or GND, VCC = 6 V, TA = –55°C to 85°C; maximum is ±1 uAmax 1 uA7
Input Leakage Current (Any Control) IILVI = VCC or GND, VCC = 6 V, TA = –55°C to 125°C; maximum is ±1 uAmax 1 uA7
Quiescent Device Current ICCVI = VCC or GND, VCC = 6 V, TA = 25°Cmax 8 uA8
Quiescent Device Current ICCVI = VCC or GND, VCC = 6 V, TA = –55°C to 85°Cmax 80 uA8
Quiescent Device Current ICCVI = VCC or GND, VCC = 6 V, TA = –55°C to 125°Cmax 160 uA8
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 2 V, TA = 25°C, CL = 50 pFmax 290 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 2 V, TA = -40°C to 85°C, CL = 50 pFmax 365 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 2 V, TA = -55°C to 125°C, CL = 50 pFmax 435 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 4.5 V, TA = 25°C, CL = 50 pFmax 58 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 4.5 V, TA = -40°C to 85°C, CL = 50 pFmax 73 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 4.5 V, TA = -55°C to 125°C, CL = 50 pFmax 87 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 6 V, TA = 25°C, CL = 50 pFmax 49 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 6 V, TA = -40°C to 85°C, CL = 50 pFmax 62 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 6 V, TA = -55°C to 125°C, CL = 50 pFmax 74 ns10
Switch Turn Off Sn to Out tPHZ, tPLZVCC = 5 V, TA = 25°C, CL = 15 pF; NOM columntyp 21 ns10
Input (Control) Capacitance CITA = 25°Cmax 10 pF10
Input (Control) Capacitance CITA = -40°C to 85°Cmax 10 pF10
Input (Control) Capacitance CITA = -55°C to 125°Cmax 10 pF10
Power dissipation capacitance CPDVCC = 5 V, TA = 25°C; NOM columntyp 93 pF10

Ordering codes, by the datasheet

1
CD74HC4067SM96
SSOP(24) · HC type; 8.20mm × 7.40mm nominal body · p. 1

Open-source boards using it

116See all 116
  • 2 layers309.6 × 95.3 mmMacrolev, the printed circuit board in 3D

    Macrolev

    heiso/macrolev

    Macrolev is an open source analog keyboard powered by Hall Effect switches

    184 parts136
  • 2 layers204 × 174.9 mmWonkle, the printed circuit board in 3D

    Wonkle

    wonkleio/wonkle

    We build together.

    519 parts125CERN-OHL-S-2.0
  • 4 layers65 × 100 mmUBMS-2, the printed circuit board in 3D

    UBMS-2

    grokicad/grokicad

    Grok powered schematic intelligence for your kicad repositories

    246 parts28
  • 4 layers344 × 117.5 mmZellia80, the printed circuit board in 3D

    Zellia80

    mhdimo/Zellia80-HE

    Zellia80-HE PCB files source

    497 parts24LGPL-2.1
  • 2 layers229 × 96 mmOscillator Board, the printed circuit board in 3D

    Oscillator Board

    Bad-Dog-Designs/ESP32-S3-Synthesizer

    Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine

    138 parts19
  • 4 layers29.3 × 187.1 mmLeft Frame, the printed circuit board in 3D

    Left Frame

    FlightDeckDIY/G1000-NXi-Mega

    Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…

    127 parts14
  • 2 layers391.2 × 166.5 mmTakt11800, the printed circuit board in 3D

    Takt11800

    vuckale/takt11800

    Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA

    284 parts12CERN-OHL-S-2.0
  • 2 layers100 × 55 mmPCBTriatlonWAY, the printed circuit board in 3D

    PCBTriatlonWAY

    Alejojoa/Triatlon-Alita

    Repositorio dedicado al desarollo de un robot triatlon.

    43 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CD74HC4067SM96?

Yes. The symbol is dk_Interface-Analog-Switches-Multiplexers-Demultiplexers:CD74HC4067SM96 and the footprint Package_SO:SSOP-24_5.3x8.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CD74HC4067SM96?

SSOP-24-208mil, with 24 pins. Its footprint is drawn on this page.

Where is the CD74HC4067SM96 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the CD74HC4067SM96?

JLCPCB lists it as part C98457, with 2,780 in stock; the sellers' links on this page open their listings.

What can replace the CD74HC4067SM96?

Parts like it in the library: the SN74CBTD3384CDB by Texas Instruments, the SN74CBTD3384DB by Texas Instruments, the CD74HC4067SM96E4 by Texas Instruments and the LT6555CGN#PBF by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CD74HC4067SM96?

116 boards in 86 repositories on GitHub; the most starred are listed on this page, with their KiCad files.