

Takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
- Size
- 391.2 × 166.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 284
- Nets
- 179
- Pads
- 2,017
- Tracks, vias
- 4,319, 112
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Feb 2022
- Updated
- 21 Dec 2025
Overview
Takt11800 is an open-source printed circuit board by vuckale, from the vuckale/takt11800 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 391.2 × 166.5 mm with 284 parts on 179 nets, routed with 4,319 tracks and 112 vias.
It is built around the STM32F072CBT6, CD74HC4067SM96 and USBLC6-2SC6, with the XC6206-2.8V, CL05B104KB54PNC and USB4800-03-A among its other parts. Its parts include 114 diodes, 11 capacitors, 8 resistors, 4 ICs and 3 connectors. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
6STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCL05B104KB54PNC
0402100nF 50V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTUSB4800-03-A
SMD-25℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
PCB/README.mdThis is Work In Progress

Required Daughterboard repository [blocked]
Parts
284| Qty | Value | Footprint | References |
|---|---|---|---|
| 111 | D_Small | keebio:Diode-dual | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +95 |
| 104 | MX-NoLED | ai03:MXOnly-1U-NoLED | a-key1, apostrophe-key1, arrow-down-key1, arrow-left-key1, arrow-right-key1, arrow-up-key1, b-key1, backspace1-key1, backspace3-key1, c-key1, comma-key1, delete-Key1, dot-key1, e-key1, NUBS-key1, NUHS-key1 +88 |
| 8 | MX-NoLED | ai03:MXOnly-1.25U-NoLED | capslock-stepped-key1, left_shift-1.25U-key1, left-mod1-1.25U-key1, left-mod2-1.25U-key1, left-mod3-1.25U-key1, right-mod1-1.25U-key1, right-mod2-1.25U-key1, right-mod3-1.25U-key1 |
| 6 | MX-NoLED | ai03:MXOnly-1.5U-NoLED | left-mod1-1.5U-key1, left-mod2-1.5U-key1, pipe-key1, right-mod1-1.5U-key1, right-mod2-1.5U-key1, tab-key1 |
| 5 | 100nF | ScottoKeebs_Components:Capacitor_0402 | C10, C11, C13, C16, C18 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 3 | 0.22K | vuckale:Resistor | R1, R2, R3 |
| 3 | 1uF | ScottoKeebs_Components:Capacitor_0402 | C8, C9, C15 |
| 3 | LED | vuckale:LED_D2.00mm | D55, D63, D71 |
| 2 | 10K | ScottoKeebs_Components:Resistor_0402 | R4, R5 |
| 2 | 4.7uF | ScottoKeebs_Components:Capacitor_0402 | C12, C17 |
| 2 | 5.1k | ScottoKeebs_Components:Resistor_0402 | R7, R8 |
| 2 | MX-NoLED | ai03:MXOnly-2U-VerticalStabilizers-NoLED | kp_enter-2U-key1, kp_plus1-key1 |
| 2 | MX-NoLED | ai03:MXOnly-6.25U-NoLED | space-6.25-C-key1, space-6.25U-B-key1 |
| 2 | MX-NoLED | ai03:MXOnly-2.25U-NoLED | enter-ANSI-key1, left_shift-2.25U-key1 |
| 2 | MX-NoLED | ai03:MXOnly-2U-ReversedStabilizers-NoLED | backspace2-key1, kp_#0-2U-key1 |
| 1 | 10k | ScottoKeebs_Components:Resistor_0402 | R6 |
| 1 | 10nF | ScottoKeebs_Components:Capacitor_0402 | C14 |
| 1 | 500mA | footprints:Fuse_0603 | F1 |
| 1 | BOOT | ScottoKeebs_Components:Button_TL3342 | SW1 |
| 1 | Buzzer | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | BZ1 |
| 1 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J4 |
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | Kicad |
| 1 | MX-NoLED | ai03:MXOnly-7U-NoLED | space-6U/7U-key1 |
| 1 | MX-NoLED | ai03:MXOnly-1.75U-NoLED | capslock-standard-key1 |
| 1 | MX-NoLED | mx_only:MXOnly-6U-Centered-NoLED | space-6U1 |
| 1 | MX-NoLED | ai03:MXOnly-ISO-ReversedStabilizers-NoLED | enter-ISO-key1 |
| 1 | MX-NoLED | ai03:MXOnly-2U-NoLED | right_shift-2U-key1 |
| 1 | MX_NoLED | ai03:MXOnly-1U-NoLED | kp_#7-key1 |
| 1 | NRST | ScottoKeebs_Components:Button_TL3342 | SW2 |
| 1 | STM32F072CBT6 | ScottoKeebs_Components:Package_LQFP-48_7x7mm_P0.5 | U1 |
| 1 | USB4800-03-A | footprints:CONN_USB4800_GCT | J2 |
| 1 | USBLC6-2SC6 | ScottoKeebs_Components:ESD_SOT-23-6 | U4 |
| 1 | XC6206 | ScottoKeebs_Components:Voltage_SOT-23 | U3 |
The 282 most common of 284 parts.
Similar boards
- 4 layers228.2 × 80.6 mm

- 2 layers226.5 × 75 mm

Superposition rounded
xommmmmmmm/superposition-borked
A Planck drop-in solder/Mill-Max PCB for Choc v2 and KS-33, with Ortho/Alpha Stagger and various bottom rows.
144 parts2 - 4 layers315.6 × 164.9 mm

MyCustom 75Keeb
MohamedAlDeep/RGB-Mechanical-KEEB-
This is my custom made 75% rgb mechanical keyboard
283 parts1 - 4 layers38.1 × 57.2 mm

Shiva v2-pcb
1000eyed/shiva-v2
A low profile 40% HHKB-like keyboard with various layout options.
26 partsMIT - 4 layers119.1 × 108.6 mm

Random ass keyboard
eyalbirger/random-ass-keyboard
this is my first entery into the stm32 world... im building a stm32 numpad +4keys + knob + under glow hot swap build. i will be using zmk and jlcPCBA service.
95 parts - 4 layers100 × 100 mm

Pcb arcade controls
GitCommitt/pcb-arcade-controls
Bij het onderzoek zijn we begonnen met de PDF lezen en belangerijke dingen opslaan. We hebben aan het begin van dit process een video gekeken hoe we het software tool KiCad moeten gebruiken in combinatie met de…
48 parts - 2 layers432.2 × 143 mm

ScottoModules
CalamityCow/MacOS-Keyboard
Two modules based on the STM32F072CBT6 to make integrated MCU PCBs simpler. They're designed to sit between 2 switches on an ortholinear or row-staggered keyboard, column-staggered will require some manual moving to get…
440 parts - 2 layers50.6 × 129 mm

Questions
How big is the Takt11800 PCB?
It measures 391.2 × 166.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Takt11800 use?
284 parts, built around the STM32F072CBT6, CD74HC4067SM96, USBLC6-2SC6 and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Takt11800 KiCad files?
From the vuckale/takt11800 repository on GitHub, at the commit this page was made from: the board is PCB/takt11800.kicad_pcb and its schematic PCB/takt11800.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Takt11800 design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).