

Superposition rounded
A Planck drop-in solder/Mill-Max PCB for Choc v2 and KS-33, with Ortho/Alpha Stagger and various bottom rows.
- Size
- 226.5 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 95
- Pads
- 578
- Tracks, vias
- 746, 63
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Dec 2024
- Updated
- 2 Jan 2025
Overview
Superposition rounded is an open-source printed circuit board by xommmmmmmm, from the xommmmmmmm/superposition-borked repository on GitHub. It is a 2-layer board of 226.5 × 75 mm with 144 parts on 95 nets, routed with 746 tracks and 63 vias.
It is built around the STM32F072CBT6, USBLC6-2SC6 and XC6206-2.8V, with the 1N4148W and CL05B104KB54PNC among its other parts. Its parts include 48 diodes, 11 capacitors, 4 connectors, 3 resistors and 3 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
5STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesCL05B104KB54PNC
0402100nF 50V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdSuperposition (WIP)
Superposition is a Planck drop-in PCB for Choc v2 and KS-33 switches, using Mill-Max 3305 compatible solder footprints. Supports ortholinear and alpha stagger, with MIT, 2x2u, and WKL/HHKB-style bottom rows for basekit bars.
ToDo:
See Trello: https://trello.com/b/xM6Azk1D/superposition-keyboards
Credits
- This project uses the following KiCAD resources:
- ScottoKeebs STM32 module: https://www.youtube.com/watch?v=o7SF2TPVV6o
- Footprints derived from Marbastlib and ScottoKeebs libraries
- PCB edge cuts and screw positions from OLKB repository: https://github.com/olkb/olkb_parts
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 59 | 1u | xomm:xomm_all_lp_tht | KS1, KS2, KS10, KS11, KS12, KS13, KS14, KS15, KS16, KS17, KS18, KS19, KS20, KS21, KS22, KS23 +43 |
| 48 | 1N4148W | xomm:D_SOD-123_xomm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 5 | 100nF | ScottoKeebs_Components:Capacitor_0402 | C7, C10, C11, C13, C16 |
| 4 | Blocker | xomm:xomm_all_lp_tht_blocker | KS1001, KS1002, KS1003, KS1004 |
| 3 | 1.25u | xomm:xomm_all_lp_tht_1.25 | KS51, KS62, KS64 |
| 3 | 1uF | ScottoKeebs_Components:Capacitor_0402 | C8, C9, C15 |
| 2 | 2u | xomm:xomm_all_lp_tht | KS56, KS59 |
| 2 | 4.7uF | ScottoKeebs_Components:Capacitor_0402 | C12, C17 |
| 2 | 5.1k | ScottoKeebs_Components:Resistor_0402 | R2, R3 |
| 1 | 10k | ScottoKeebs_Components:Resistor_0402 | R1 |
| 1 | 10nF | ScottoKeebs_Components:Capacitor_0402 | C14 |
| 1 | 2,6.25u | xomm:xomm_all_lp_tht_6.25 | KS57 |
| 1 | 2.25u | xomm:xomm_all_lp_tht_2.25 | KS58 |
| 1 | 2.75u | xomm:xomm_all_lp_tht_2.75 | KS54 |
| 1 | 500mA | ScottoKeebs_Components:Fuse_0603 | F1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Cutout | xomm:xomm_lp_stab_cutout_6.25 | S57 |
| 1 | PlanckHoles | keyboard_parts:planck-pcb-cutouts | H1 |
| 1 | STM32F072CBT6 | ScottoKeebs_Components:Package_LQFP-48_7x7mm_P0.5 | U1 |
| 1 | SW_Push | ScottoKeebs_Components:Button_TL3342 | SW1 |
| 1 | UDB | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | USBLC6-2SC6 | ScottoKeebs_Components:ESD_SOT-23-6 | U4 |
| 1 | USB_C | ScottoKeebs_Components:USB_C_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206 | ScottoKeebs_Components:Voltage_SOT-23 | U3 |
Similar boards
- 4 layers228.2 × 80.6 mm

- 2 layers391.2 × 166.5 mm

Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 4 layers315.6 × 164.9 mm

MyCustom 75Keeb
MohamedAlDeep/RGB-Mechanical-KEEB-
This is my custom made 75% rgb mechanical keyboard
283 parts1 - 4 layers38.1 × 57.2 mm

Shiva v2-pcb
1000eyed/shiva-v2
A low profile 40% HHKB-like keyboard with various layout options.
26 partsMIT - 4 layers119.1 × 108.6 mm

Random ass keyboard
eyalbirger/random-ass-keyboard
this is my first entery into the stm32 world... im building a stm32 numpad +4keys + knob + under glow hot swap build. i will be using zmk and jlcPCBA service.
95 parts - 4 layers100 × 100 mm

Pcb arcade controls
GitCommitt/pcb-arcade-controls
Bij het onderzoek zijn we begonnen met de PDF lezen en belangerijke dingen opslaan. We hebben aan het begin van dit process een video gekeken hoe we het software tool KiCad moeten gebruiken in combinatie met de…
48 parts - 2 layers229.8 × 102.6 mm

- 2 layers185.3 × 68 mm

Questions
How big is the Superposition rounded PCB?
It measures 226.5 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Superposition rounded use?
144 parts, built around the STM32F072CBT6, USBLC6-2SC6, XC6206-2.8V and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Superposition rounded KiCad files?
From the xommmmmmmm/superposition-borked repository on GitHub, at the commit this page was made from: the board is Rounded/Superposition-rounded.kicad_pcb and its schematic Daughterboards/Daughterboards.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Superposition rounded design in my own project?
Its repository states no licence, so its author keeps all rights: ask xommmmmmmm before reusing the design.