Skip to the content
4 layers119.1 × 108.6 mmRandom ass keyboard, the printed circuit board in 3D

this is my first entery into the stm32 world... im building a stm32 numpad +4keys + knob + under glow hot swap build. i will be using zmk and jlcPCBA service.

Size
119.1 × 108.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
95
Nets
82
Pads
431
Tracks, vias
49,614, 99
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Mar 2026
Updated
9 May 2026

Overview

Random ass keyboard is an open-source printed circuit board by eyalbirger, from the eyalbirger/random-ass-keyboard repository on GitHub. It is a 4-layer board of 119.1 × 108.6 mm with 95 parts on 82 nets, routed with 49,614 tracks and 99 vias.

It is built around the STM32F072CBT6, USBLC6-2SC6 and XC6206-2.8V, with the CL05B104KB54PNC among its other parts. Its parts include 34 diodes, 23 switches, 12 capacitors, 4 resistors and 3 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.

Main components

4

README

README.md

random ass keyboard

this is my first entery into the stm32 world... im building a stm32 numpad +4keys + knob + under glow hot swap build. i will be using zmk and jlcPCBA service.

to use this you will need to program it via qmk, and solder the pcb yourself. you will also need hardware to assemble it.

BOM:

quantitynamevalue/lcsc
21hot swap sockets.
1ec11.
1push buttonTL3342
1esdUSBLC6-2SC6
1fuseFuse_0603
5capacitor 0402100nF
3capacitor 04021uF
2capacitor 04024.7uF
1polarized capacitor100uF, 10v
2resistor 04025.1k
1resistor 040210k
1resistor 0805330R
22diode sod123
12ledws2812b
1stm32stm32f072cbt6
1voltage regulatorXC6206
1usb cUSB_C_HRO_TYPE-C-31-M-12
1total pcba with all those parts + shipping170$
21mx switch10$
21keycaps10$
total200$

this should cost about 150$ alt text
this is the board. you should have the pcb seperated from the plate and back. you should assemble them with m2 screws and then put the switches in. alt text
qmk firmware will be coming shortly

Parts

95
QtyValueFootprintReferences
22DiodeScottoKeebs_Components:Diode_SOD-123D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D19, D22, D23, D24, D25 +6
18Keyswitchmarbastlib-mx:SW_MX_HS_CPG151101S11_1uS1, S2, S3, S4, S5, S6, S10, S11, S13, S14, S15, S19, S22, S23, S24, S25 +2
12LED_WS2812BScottoKeebs_Components:LED_WS2812BD8, D18, D20, D21, D26, D27, D28, D29, D30, D31, D32, D33
5100nFScottoKeebs_Components:Capacitor_0402C7, C10, C11, C13, C16
31uFScottoKeebs_Components:Capacitor_0402C8, C9, C15
3Keyswitchmarbastlib-mx:SW_MX_HS_CPG151101S11_1.5uS12, S16, S17
24.7uFScottoKeebs_Components:Capacitor_0402C12, C17
25.1kScottoKeebs_Components:Resistor_0402R2, R3
1100µF 10VCapacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_HandSolderC1
110kScottoKeebs_Components:Resistor_0402R1
110nFScottoKeebs_Components:Capacitor_0402C14
1330RScottoKeebs_Components:Resistor_0805R4
1500mAScottoKeebs_Components:Fuse_0603F1
1LOGOphotosss:elder wantG***
1LOGOLOGOG***
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHolesSW2
1STM32F072CBT6ScottoKeebs_Components:Package_LQFP-48_7x7mm_P0.5U1
1SW_PushScottoKeebs_Components:Button_TL3342SW1
1USBLC6-2SC6ScottoKeebs_Components:ESD_SOT-23-6U4
1USB_CScottoKeebs_Components:USB_C_HRO_TYPE-C-31-M-12J1
1XC6206ScottoKeebs_Components:Voltage_SOT-23U3

The 80 most common of 95 parts.

Similar boards

  • 2 layers391.2 × 166.5 mmTakt11800, the printed circuit board in 3D

    Takt11800

    vuckale/takt11800

    Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA

    284 parts12CERN-OHL-S-2.0
  • 4 layers228.2 × 80.6 mmSnake pcb, the printed circuit board in 3D

    Snake pcb

    1000eyed/snake

    Repository for snake keyboard

    199 parts6
  • 2 layers226.5 × 75 mmSuperposition rounded, the printed circuit board in 3D

    Superposition rounded

    xommmmmmmm/superposition-borked

    A Planck drop-in solder/Mill-Max PCB for Choc v2 and KS-33, with Ortho/Alpha Stagger and various bottom rows.

    144 parts2
  • 4 layers315.6 × 164.9 mmMyCustom 75Keeb, the printed circuit board in 3D

    MyCustom 75Keeb

    MohamedAlDeep/RGB-Mechanical-KEEB-

    This is my custom made 75% rgb mechanical keyboard

    283 parts1
  • 4 layers38.1 × 57.2 mmShiva v2-pcb, the printed circuit board in 3D

    Shiva v2-pcb

    1000eyed/shiva-v2

    A low profile 40% HHKB-like keyboard with various layout options.

    26 partsMIT
  • 4 layers100 × 100 mmPcb arcade controls, the printed circuit board in 3D

    Pcb arcade controls

    GitCommitt/pcb-arcade-controls

    Bij het onderzoek zijn we begonnen met de PDF lezen en belangerijke dingen opslaan. We hebben aan het begin van dit process een video gekeken hoe we het software tool KiCad moeten gebruiken in combinatie met de…

    48 parts
  • 2 layers432.2 × 143 mmScottoModules, the printed circuit board in 3D

    ScottoModules

    CalamityCow/MacOS-Keyboard

    Two modules based on the STM32F072CBT6 to make integrated MCU PCBs simpler. They're designed to sit between 2 switches on an ortholinear or row-staggered keyboard, column-staggered will require some manual moving to get…

    440 parts
  • 2 layers229.8 × 102.6 mmBw2, the printed circuit board in 3D

    Bw2

    hazels-garage/bad-wings

    Bad Wings

    107 parts107CC-BY-SA-4.0

Questions

How big is the Random ass keyboard PCB?

It measures 119.1 × 108.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Random ass keyboard use?

95 parts, built around the STM32F072CBT6, USBLC6-2SC6, XC6206-2.8V and CL05B104KB54PNC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Random ass keyboard KiCad files?

From the eyalbirger/random-ass-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/random ass keyboard.kicad_pcb and its schematic pcb/random ass keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Random ass keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask eyalbirger before reusing the design.