

Vootington V4N V2
analog V4N pcb
- Size
- 242.9 × 95.3 mm
- Copper layers
- 2
- Thickness
- 0.3 mm
- Parts
- 344
- Nets
- 191
- Pads
- 1,057
- Tracks, vias
- 1,637, 451
- Pours
- 119
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Aug 2023
- Updated
- 5 Apr 2026
Overview
Vootington V4N V2 is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/vootington repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 242.9 × 95.3 mm with 344 parts on 191 nets, routed with 1,637 tracks and 451 vias.
It is built around the STM32F072CBT6, 74AHCT1G125SE and SLSS49E-3, with the 74HC4051, AP2112K-3.3 and PRTR5V0U2X among its other parts. Its parts include 128 capacitors, 65 ICs, 55 diodes, 14 connectors and 5 switches. It belongs with the RP2040 and STM32 boards of this library.
Main components
8STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)74AHCT1G125SE
SOT-353-40℃~+125℃ 1 1 4.5V~5.5V 4.7ns@5V,50pF 40uA 74AHCT 8mA 8mA Schmitt trigger Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, TransceiversSLSS49E-3
SOT-23-40℃~+150℃ 1.5mA 3V~12V 5mA Built-in Schmitt trigger Omnipolar SOT-23 Linear Hall Sensors ROHSSlkorHall Switches74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, MultiplexersAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SKQGABE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1,000,000 cycles 1.5mm 1.6N 12V 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile SwitchesSMF9.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdVootington
The Vootington is an open source hall-effect pcb for the V4N keyboard.
The aim of this project is to offer a functional hardware Hall-effect reference project for the community. The project is not meant to offer the full aspects of firmware. I leave that to smart people to figure out.
The keyboard takes design cues from the Wooting keyboards, the moonpad and the void switch keyboards from riskable.
Layout

Firmware
The basic firmware included in the folder is experimental and designed by KarlK90. Their work can be found here: https://github.com/KarlK90/qmk_firmware/tree/feature/vootington/keyboards/calvin0563/vootington
Pete is currently developing more advanced HE firmware for zmk. Keep your eyes on that: https://github.com/petejohanson/vootington-zmk-config
beware!!!
The hardware configuration for rgb on the vootington is currently not supported by zmk, which means no rgb with the zmk firmware.
Todo
- create advanced firmware with full HE functionality
Disclaimer
This PCB has been fully tested and is confirmed to work. However, no-one involved in this project is responsible for any usage issues that may arise. Order at your own risk. Feel free to edit, modify and otherwise utilise these files.
License
This project is released under the GPL v3 License. Please refer to the LICENCE file.
Credits
big thanks to KarlK90 for making the initial firmware and for supporting the hardware design of the keyboard.
another huge thanks to pete for writing zmk firmware for this!
As always big thanks also to the many people who helped to inspire this board!
Any questions, contact Calvin0563 on Discord.
Parts
344| Qty | Value | Footprint | References |
|---|---|---|---|
| 116 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +100 |
| 55 | YS-SK6803MINI-E | cipulot_parts:SK6803-MINI-E | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +39 |
| 52 | KEYSW | Moonpad:Wooting_1.00u | K_1, K_2, K_10, K_11, K_12, K_13, K_14, K_15, K_16, K_17, K_18, K_19, K_20, K_21, K_22, K_23 +36 |
| 52 | SLSS49E-3 | Package_TO_SOT_SMD:SOT-23 | U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +36 |
| 16 | MountingHole | cipulot_parts:HOLE_M2 | H9, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24 |
| 10 | Conn_01x01 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 7 | 100pF | Capacitor_SMD:C_0402_1005Metric | C119, C120, C121, C122, C123, C124, C125 |
| 7 | 74HC4051 | cipulot_parts:TSSOP16 | U57, U58, U59, U60, U61, U62, U63 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C60, C61, C128 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | SKQGABE010 | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C127 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C58 |
| 1 | 1k OHM 100mhz | Fuse:Fuse_0402_1005Metric | FB1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 74AHCT1G125 | Package_TO_SOT_SMD:TSOT-23-5 | U56 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U64 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | JST SH | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J13 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_2.75u | S1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_6.25u | S2 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_2.25u | S3 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U55 |
| 1 | Pico EZmate | Connector_Molex:Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical | J14 |
| 1 | SMF9.0CA | Diode_SMD:D_SOD-123 | D_PWR1 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U53 |
| 1 | STM32G0B1CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U65 |
| 1 | USB_C sink board 1.3mm | PCM_marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J12 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U54 |
More from calvin-mcd/vootington
2- 2 layers242.9 × 95.3 mm

- 2 layers242.9 × 95.3 mm

Similar boards
- 4 layers227.3 × 85 mm

Le capybara
sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard
118 parts58CERN-OHL-W-2.0 - 4 layers242.9 × 95.3 mm

- 2 layers276.2 × 76.2 mm

- 2 layers245.7 × 83.8 mm

- 2 layers303.8 × 94.2 mm

- 4 layers44.5 × 40.6 mm

- 2 layers227.3 × 84.9 mm

Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072
110 parts53CERN-OHL-W-2.0 - 2 layers209.7 × 76.3 mm

Questions
How big is the Vootington V4N V2 PCB?
It measures 242.9 × 95.3 mm and has 2 copper layers, 0.3 mm thick.
What parts does the Vootington V4N V2 use?
344 parts, built around the STM32F072CBT6, 74AHCT1G125SE, SLSS49E-3 and 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vootington V4N V2 KiCad files?
From the calvin-mcd/vootington repository on GitHub, at the commit this page was made from: the board is Project/old version/vootington gaming-backups/vootington V4N V2.kicad_pcb and its schematic Project/MCU V4N STM32G0B1CBT6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vootington V4N V2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).