

The expanse
40s keyboard pcb featuring two 625u spacebars
- Size
- 276.2 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 117
- Nets
- 92
- Pads
- 447
- Tracks, vias
- 486, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Feb 2024
- Updated
- 23 Mar 2025
Overview
The expanse is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/the-expanse repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 276.2 × 76.2 mm with 117 parts on 92 nets, routed with 486 tracks and 41 vias.
It is built around the STM32F072CBT6, USBLC6-2SC6 and SKQGABE010, with the SMF9.0CA among its other parts. Its parts include 43 diodes, 9 capacitors, 6 switches, 3 resistors and 3 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
4STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)SKQGABE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1,000,000 cycles 1.5mm 1.6N 12V 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile SwitchesSMF9.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdthe-expanse
The expanse is a semi-split 40s keyboard pcb featuring two fullsized 625u spacebars for each half. The layout idea was concocted by NoahK and people from their design channel, and I made the pcb using a STM Mcu.
Layout

Todo
- order & test pcb
- create firmware
- print & test case
Disclaimer
This PCB has been fully tested and confirmed to work. The members of the PCB development team are however not liable if you end up with a non-functional pcb. Order at your own risk. Support will not be provided but pull requests will be reviewed and possibly accepted.
License
This project is released under the GPL v3 License. Please refer to the LICENCE file.
Credits
Thanks to NoahK for the continuous inspiration!
And, as always big thanks to the 40s community!
Any questions, contact calvin0563 on Discord.
Parts
117| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | D_Small | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +27 |
| 36 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX2, MX10, MX11, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX26, MX27 +20 |
| 7 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.25u | MX13, MX24, MX38, MX40, MX43, MX45, MX46 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C7 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 275 | PCM_marbastlib-mx:STAB_MX_P_2.75u | S3, S4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 625 | PCM_marbastlib-mx:STAB_MX_P_6.25u | S1, S2 |
| 2 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.75u | MX25, MX35 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ISO | PCM_marbastlib-mx:STAB_MX_P_ISO-ROT | S5 |
| 1 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.5u | MX12 |
| 1 | SKQGABE010 | PCM_marbastlib-various:SW_SPST_SKQG_WithStem | SW1 |
| 1 | SMF9.0CA | Diode_SMD:D_SOD-123 | D_PWR1 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | PCM_marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U3 |
Similar boards
- 2 layers242.9 × 95.3 mm

- 2 layers245.7 × 83.8 mm

- 2 layers195.3 × 76.2 mm

- 2 layers243.3 × 95.4 mm

The PETER keyboard STM
calvin-mcd/the-PETER-keyboard
compact 60ish keyboard inspired by the 40s formfactor
142 parts1GPL-3.0 - 2 layers208.8 × 396.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 4 layers227.3 × 85 mm

Le capybara
sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard
118 parts58CERN-OHL-W-2.0 - 2 layers227.3 × 84.9 mm

Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072
110 parts53CERN-OHL-W-2.0 - 2 layers209.7 × 76.3 mm

Questions
How big is the The expanse PCB?
It measures 276.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the The expanse use?
117 parts, built around the STM32F072CBT6, USBLC6-2SC6, SKQGABE010 and SMF9.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the The expanse KiCad files?
From the calvin-mcd/the-expanse repository on GitHub, at the commit this page was made from: the board is Project/the expanse.kicad_pcb and its schematic Project/the expanse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the The expanse design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).