
Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

Capactive sensing (EC) pcb for Le Chiffre keyboard
Le capybara is an open-source printed circuit board by sporkus, from the sporkus/le_capybara_keyboard repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 227.3 × 85 mm with 118 parts on 69 nets, routed with 908 tracks and 122 vias.
It is built around the STM32F072CBT6, 74HC4051 and PRTR5V0U2X, with the SK6812MINI-E, ASMD1206-150 and SKQGABE010 among its other parts. Its parts include 41 switches, 18 resistors, 17 capacitors, 11 diodes and 6 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Capacitive sensing (aka Topre) keyboard in Le Chiffre layout
Fully tested
Plates have m2 threaded holes for securing the plate and switches to the PCB. DIY tapping is not difficult if your plate manufacturer does not offer tapping services.
Recommended plate material is 1.2mm steel. Plate files are in the expected physical dimensions. No kerf adjustments have been applied. The dxf files have been used successfully with SendCutSend and LaserBoost. JLCPCB is not recommnded for the plates without further testing to adapt to their milling process.
EC housing from DESKEYS and KLC playground have been tested.
Optional

Download and open this html locally
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | EC_SW | capacitive_sensors:capy_pad_1U_90deg | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +14 |
| 14 | M2 Hole | capacitive_sensors:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H7, H8, H9, H11, H12, H13, H14, H15, H18 |
| 11 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R9, R10, R11, R12, R13, R14, R16, R17 |
| 11 | SK6812MINI | modified_footprints:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111 |
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C9, C10, C12, C17 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C8, C13, C15, C16 |
| 4 | EC_SW | capacitive_sensors:ec_pad_1U_90deg | SW39, SW40, SW42, SW43 |
| 4 | M2 Hole | MountingHole:MountingHole_2.2mm_M2 | H6, H10, H16, H17 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 74HC4051 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4, U6 |
| 2 | EC_SW | capacitive_sensors:capy_pad_2U_90deg | SW32, SW33 |
| 2 | EC_SW | capacitive_sensors:ecs_pad_combo_0.125u_offset | SW31, SW34 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 60R@100MHz | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | ASMD1206-150 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J101 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | LOGO | LOGO | G*** |
| 1 | OLED I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | OPA354AIDBVR | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U3 |
| 1 | Rotary_Encoder_Switch | modified_footprints:ROT_Alps_EC11E-Switch | SW36 |
| 1 | SKQGABE010 | modified_footprints:SW_SPST_SKQG_WithoutStem | SW37 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_Push | modified_footprints:MX-Solderable-1U | SW35 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | USB_C sink board 1.3mm | USB4510-03-1-A:USB4510031A | J1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U1 |

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072




calvin-mcd/universal-vault
pcb for the vault35 covering all sorts of layout options

Ciantha/cursed-scandinavian-iso-van
first "original" pcb, let's see how this goes


josh-l-wang/typomatrix_stm32
typomatrix 3020 keyboard on STM32F072 controller
It measures 227.3 × 85 mm and has 4 copper layers, 1.61 mm thick.
118 parts, built around the STM32F072CBT6, 74HC4051, PRTR5V0U2X and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sporkus/le_capybara_keyboard repository on GitHub, at the commit this page was made from: the board is kicad/pcb/le_capybara.kicad_pcb and its schematic kicad/pcb/analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).