

Qorthoz
ortholinear 10.25u qaz compatible pcb
- Size
- 195.3 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 87
- Pads
- 411
- Tracks, vias
- 542, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Oct 2023
- Updated
- 24 Oct 2025
Overview
Qorthoz is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/qorthoz repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 195.3 × 76.2 mm with 105 parts on 87 nets, routed with 542 tracks and 38 vias.
It is built around the USBLC6-2SC6, SKQGABE010 and SMF9.0CA. Its parts include 38 diodes, 10 capacitors, 4 connectors, 4 switches and 3 resistors. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
3USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)SKQGABE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1,000,000 cycles 1.5mm 1.6N 12V 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile SwitchesSMF9.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdqorthoz
qorthoz is an ortholinear 10.25u qaz compatible pcb with usb c and jst ports for case compatibility, rgb breakout strip and 6 additional pins for switch or rotary extensions.
Layout

Pictures

Firmware
Firmware is written for vial and the source code is provided for edits.
RGB Strip
Please note that the PCB is using a STM32 MCU which runs on 3v3 logic. Using a 5V rgb strip can sometimes interfere with the 3v3 Data Signal from the MCU. If you use a 5V rgb strip solder Data IN and GND to the beginning of the strip but DO NOT solder power to the beginning but anywhere else on the strip. This should be enough to avoid 5V Power interference with the 3v3 Data IN.
Disclaimer
This PCB has been fully tested and is confirmed to work. However, no-one involved in this project is responsible for any usage issues that may arise. Order at your own risk. Feel free to edit, modify and otherwise utilise these files.
License
This project is released under the GPL v3 License. Please refer to the LICENCE file.
Credits
This pcb has been made on request kriscovery. Do check out their beautiful qaz and qez compatible cases! https://www.printables.com/@kriscovery
The silkscreen logo has been taken from the german 40s keyboard discord ClackTales!
As always big thanks to the many people who helped me and inspired this board!
Any questions, contact Calvin0563 on Discord.
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | D_Small | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 |
| 36 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX2, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX21, MX22, MX23, MX24, MX25 +20 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4 |
| 3 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.25u | MX10, MX20, MX30 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | JST SH | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_6.25u | S3 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S2 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.25u | S1 |
| 1 | SKQGABE010 | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | SMF9.0CA | Diode_SMD:D_SOD-123 | D_PWR1 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U3 |
Similar boards
- 2 layers245.7 × 83.8 mm

- 2 layers276.2 × 76.2 mm

- 2 layers243.3 × 95.4 mm

The PETER keyboard STM
calvin-mcd/the-PETER-keyboard
compact 60ish keyboard inspired by the 40s formfactor
142 parts1GPL-3.0 - 2 layers242.9 × 95.3 mm

- 2 layers200 × 76.2 mm

- 2 layers86 × 33 mm

USB hub daughterboard
bluepylons/A-USB-Daughterboard
A USB-C daughterboard with a 4-port USB hub on it, based on the Microchip USB2514 IC
53 parts9 - 2 layers266.7 × 99.6 mm

Ortho66 Optical
MasterSpoon/Ortho66_Optical
Ortho 66 Optical PCB using KeyChron low profile optical switches
385 parts7 - 2 layers248.6 × 81.9 mm

Alpha curISO
calvin-mcd/alpha-curISO
The Alpha CurISO is a community pcb for the Curio. It supports two different Alpha Staggers and Ortho Layouts. This is a collaboration between jadethemaid, airuei, galvy0 and calvin.
241 parts2
Questions
How big is the Qorthoz PCB?
It measures 195.3 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Qorthoz use?
105 parts, built around the USBLC6-2SC6, SKQGABE010 and SMF9.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Qorthoz KiCad files?
From the calvin-mcd/qorthoz repository on GitHub, at the commit this page was made from: the board is Project/qorthoz.kicad_pcb and its schematic Project/qorthoz.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Qorthoz design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).